Remote temperature sensor recommendation

53 views
Skip to first unread message

Cindy

unread,
Nov 1, 2024, 5:54:26 PM11/1/24
to weewx-user
I have a Raspberry Pi  running Weewx with the Rainwise CC-3000.

I want to add some remote temperature sensors to my setup but don't know if Rainwise has any.  Does anyone know the cheapest way to add them. I assume if I use a different brand I will have to get another receiver. I don't want to use a company which requires registration or dependance on their servers.

DR

unread,
Nov 1, 2024, 6:54:23 PM11/1/24
to weewx...@googlegroups.com
I think the CC3000 uses the Rainwise Mark III, perhaps the Long Range Model.

I will check my set  up to see if there are inputs to the station that
allows added sensors or not.  There was a (very expensive) solar sensor
option which was not documented and despite trying to find out how it
was to be added, all the tech would tell me, despite directly asking,
was that if I bought the add-on option, they'd send a sheet with
installation and setup directions.

If  you are asking if  there are Rainwise or third party sensors with
their own transmitters that the CC3000 can receive from the additional
sensors and integrate  those readings into the 3000's output stream,
other users here will have to answer that sine I'm not using that and
unaware of that as an option.


Dale

PS, interest is always greater than one might expect and this forum is a
warehouse of lots of good info, so if you find a solution, or verify
there isn't anything a person can do, please post a followup.

Best wishes,  Dale


Reply all
Reply to author
Forward
0 new messages