New install - weather data seen but not captured/stored/reported

114 views

Skip to first unread message

David Levine

unread,

Dec 31, 2020, 8:53:55 AM12/31/20

to weewx-user

I'm a new weewx user and troubleshooting data capture on a Raspberry pi. I have a WeatherFlow Tempest configured in weewx after running for a moment with simulator as the station device. After switching to the Tempest WeatherFlowUDP device in the conf file, it appears no data has been captured as the reports (web pages) all show the last updated time as when the Simulator was active. The files in the nginx web server docroot are being update based on the file times but the content remains the same and showing the "Last updated" date/time when Simulator was active, whether a scheduled update or manual update was triggered via sudo wee_reports /etc/weewx/weewx.conf.

When setting log_raw_packets = True in the conf file, I see packets received from the weather statoin with data showing in the syslog output. I noticed no unexpected startup messages in syslog when setting debug=1 in the conf file.

I have queried the sqlite sdb file and most tables just have the record that I suspect was generated when Simulator was the weather station device at initial startup. I noticed no data in the sqlite database from the Tempest/WeatherFlow station.

It is a very base install of weewx on a pi following https://jackstromberg.com/2018/06/setting-up-weewx-with-a-raspberry-pi/ and https://github.com/captain-coredump/weatherflow-udp . I added the belchertown skin but I wouldn't expect that to have an impact the data being captured. I have not yet looked to configure any other output data sources/services. I modified the reporting period to every 5 minutes.

What have I overlooked or should I investigate next?

Below is my weewx.conf file followed by pi's syslog at startup of weewx with a bit of UDP packets coming in.

Many thanks in advance!
David

weewx.conf

# WEEWX CONFIGURATION FILE

# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero

debug = 1

# Root directory of the weewx data file hierarchy for this station

WEEWX_ROOT = /

# Whether to log successful operations

log_success = True

# Whether to log unsuccessful operations

log_failure = True

# How long to wait before timing out a socket (FTP, HTTP) connection

socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.

version = 4.2.0

##############################################################################

# This section is for information about the station.

[Station]

# Description of the station location

location = "Waldwick, NJ"

# Latitude in decimal degrees. Negative for southern hemisphere

latitude = 41.01996

# Longitude in decimal degrees. Negative for western hemisphere.

longitude = -74.12104

# Altitude of the station, with unit it is in. This is downloaded from

# from the station if the hardware supports it.

altitude = 280, foot

# Set to type of station hardware. There must be a corresponding stanza

# in this file with a 'driver' parameter indicating the driver to be used.

station_type = WeatherFlowUDP

# If you have a website, you may specify an URL

station_url = https://tempestwx.com/station/37773/

# The start of the rain year (1=January; 10=October, etc.). This is

# downloaded from the station if the hardware supports it.

rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)

week_start = 6

##############################################################################

[WeatherFlowUDP]

driver = user.weatherflowudp

log_raw_packets = True

udp_address = <broadcast>

# udp_address = 0.0.0.0

# udp_address = 255.255.255.255

udp_port = 50222

udp_timeout = 90

share_socket = False

[[sensor_map]]

outTemp = air_temperature.ST-00000025.obs_st

outHumidity = relative_humidity.ST-00000025.obs_st

pressure = station_pressure.ST-00000025.obs_st

#lightning_strikes = lightning_strike_count.ST-00000025.obs_st

#avg_distance = lightning_strike_avg_distance.ST-00000025.obs_st

outTempBatteryStatus = battery.ST-00000025.obs_st

windSpeed = wind_speed.ST-00000025.rapid_wind

windDir = wind_direction.ST-00000025.rapid_wind

#luxXXX = illuminance.ST-00000025.obs_st

UV = uv.ST-00000025.obs_st

rain = rain_accumulated.ST-00000025.obs_st

windBatteryStatus = battery.ST-00000025.obs_st

radiation = solar_radiation.ST-00000025.obs_st

#lightningXXX = distance.ST-00000025.evt_strike

#lightningYYY = energy.ST-00000025.evt_strike

##############################################################################

[Simulator]

# This section is for the weewx weather station simulator

# The time (in seconds) between LOOP packets.

loop_interval = 2.5

# The simulator mode can be either 'simulator' or 'generator'.

# Real-time simulator. Sleep between each LOOP packet.

mode = simulator

# Generator. Emit LOOP packets as fast as possible (useful for testing).

#mode = generator

# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default

# is to use the present time.

#start = 2011-01-01T00:00

# The driver to use:

driver = weewx.drivers.simulator

##############################################################################

# This section is for uploading data to Internet sites

[StdRESTful]

[[StationRegistry]]

# To register this weather station with weewx, set this to true

register_this_station = true

[[AWEKAS]]

# This section is for configuring posts to AWEKAS.

# If you wish to do this, set the option 'enable' to true,

# and specify a username and password.

# To guard against parsing errors, put the password in quotes.

enable = false

username = replace_me

password = replace_me

[[CWOP]]

# This section is for configuring posts to CWOP.

# If you wish to do this, set the option 'enable' to true,

# and specify the station ID (e.g., CW1234).

enable = false

station = replace_me

# If this is an APRS (radio amateur) station, uncomment

# the following and replace with a passcode (e.g., 12345).

#passcode = replace_me (APRS stations only)

[[PWSweather]]

# This section is for configuring posts to PWSweather.com.

# If you wish to do this, set the option 'enable' to true,

# and specify a station and password.

# To guard against parsing errors, put the password in quotes.

enable = false

station = replace_me

password = replace_me

[[WOW]]

# This section is for configuring posts to WOW.

# If you wish to do this, set the option 'enable' to true,

# and specify a station and password.

# To guard against parsing errors, put the password in quotes.

enable = false

station = replace_me

password = replace_me

[[Wunderground]]

# This section is for configuring posts to the Weather Underground.

# If you wish to do this, set the option 'enable' to true,

# and specify a station (e.g., 'KORHOODR3') and password.

# To guard against parsing errors, put the password in quotes.

enable = false

station = replace_me

password = replace_me

# If you plan on using wunderfixer, set the following

# to your API key:

api_key = replace_me

# Set the following to True to have weewx use the WU "Rapidfire"

# protocol. Not all hardware can support it. See the User's Guide.

rapidfire = False

##############################################################################

# This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT

SKIN_ROOT = /etc/weewx/skins

# Where the generated reports should go, relative to WEEWX_ROOT

HTML_ROOT = /var/www/html/weewx

# The database binding indicates which data should be used in reports.

data_binding = wx_binding

# Whether to log a successful operation

log_success = True

# Whether to log an unsuccessful operation

log_failure = False

# Reporting period is every 5 minutes

report_timing = */5 * * * *

# Each of the following subsections defines a report that will be run.

# See the customizing guide to change the units, plot types and line

# colors, modify the fonts, display additional sensor data, and other

# customizations. Many of those changes can be made here by overriding

# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]

# The SeasonsReport uses the 'Seasons' skin, which contains the

# images, templates and plots for the report.

skin = Seasons

enable = true

[[SmartphoneReport]]

# The SmartphoneReport uses the 'Smartphone' skin, and the images and

# files are placed in a dedicated subdirectory.

skin = Smartphone

enable = false

HTML_ROOT = /var/www/html/weewx/smartphone

[[MobileReport]]

# The MobileReport uses the 'Mobile' skin, and the images and files

# are placed in a dedicated subdirectory.

skin = Mobile

enable = false

HTML_ROOT = /var/www/html/weewx/mobile

[[StandardReport]]

# This is the old "Standard" skin. By default, it is not enabled.

skin = Standard

enable = false

[[Belchertown]]

skin = Belchertown

HTML_ROOT = /var/www/html/weewx/belchertown

[[FTP]]

# FTP'ing the results to a webserver is treated as just another report,

# albeit one with an unusual report generator!

skin = Ftp

# If you wish to use FTP, set "enable" to "true", then

# fill out the next four lines.

# Use quotes around passwords to guard against parsing errors.

enable = false

user = replace_me

password = replace_me

server = replace_me # The ftp server name, e.g, www.myserver.org

path = replace_me # The destination directory, e.g., /weather

# Set to True for an FTP over TLS (FTPS) connection. Not all servers

# support this.

secure_ftp = False

# To upload files from something other than what HTML_ROOT is set

# to above, specify a different HTML_ROOT here.

#HTML_ROOT = /var/www/html/weewx

# Most FTP servers use port 21

port = 21

# Set to 1 to use passive mode, zero for active mode

passive = 1

[[RSYNC]]

# rsync'ing to a webserver is treated as just another report

skin = Rsync

# If you wish to use rsync, you must configure passwordless ssh using

# public/private key authentication from the user account that weewx

# runs to the user account on the remote machine where the files

# will be copied.

# If you wish to use rsync, set "enable" to "true", then

# fill out server, user, and path.

# The server should appear in your .ssh/config file.

# The user is the username used in the identity file.

# The path is the destination directory, such as /var/www/html/weather.

# Be sure that the user has write permissions on the destination!

enable = false

server = replace_me

user = replace_me

path = replace_me

# To upload files from something other than what HTML_ROOT is set

# to above, specify a different HTML_ROOT here.

#HTML_ROOT = /var/www/html/weewx

# Rsync can be configured to remove files from the remote server if

# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you

# make a mistake in the remote path, you could could unintentionally

# cause unrelated files to be deleted. Set to 1 to enable remote file

# deletion, zero to allow files to accumulate remotely.

delete = 0

####

# Various options for customizing your reports.

[[Defaults]]

[[[Units]]]

# The following section sets what unit to use for each unit group.

# NB: The unit is always in the singular. I.e., 'mile_per_hour',

# NOT 'miles_per_hour'

[[[[Groups]]]]

group_altitude = foot # Options are 'foot' or 'meter'

group_degree_day = degree_F_day # Options are 'degree_F_day' or 'degree_C_day'

group_distance = mile # Options are 'mile' or 'km'

group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar', 'hPa', or 'kPa'

group_rain = inch # Options are 'inch', 'cm', or 'mm'

group_rainrate = inch_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'

group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'

group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'

group_temperature = degree_F # Options are 'degree_F' or 'degree_C'

# The following section sets the formatting for each type of unit.

[[[[StringFormats]]]]

centibar = %.0f

cm = %.2f

cm_per_hour = %.2f

degree_C = %.1f

degree_F = %.1f

degree_compass = %.0f

foot = %.0f

hPa = %.1f

hour = %.1f

inHg = %.3f

inch = %.2f

inch_per_hour = %.2f

km = %.1f

km_per_hour = %.0f

km_per_hour2 = %.1f

knot = %.0f

knot2 = %.1f

kPa = %.2f

mbar = %.1f

meter = %.0f

meter_per_second = %.1f

meter_per_second2 = %.1f

mile = %.1f

mile_per_hour = %.0f

mile_per_hour2 = %.1f

mm = %.1f

mmHg = %.1f

mm_per_hour = %.1f

percent = %.0f

second = %.0f

uv_index = %.1f

volt = %.1f

watt_per_meter_squared = %.0f

NONE = " N/A"

# The following section overrides the label used for each type of unit

[[[[Labels]]]]

meter = " meter", " meters" # You may prefer "metre".

day = " day", " days"

hour = " hour", " hours"

minute = " minute", " minutes"

second = " second", " seconds"

NONE = ""

# The following section sets the format for each time scale.

# The values below will work in every locale, but they may not look

# particularly attractive.

[[[[TimeFormats]]]]

hour = %H:%M

day = %X

week = %X (%A)

month = %x %X

year = %x %X

rainyear = %x %X

current = %x %X

ephem_day = %X

ephem_year = %x %X

[[[[Ordinates]]]]

# Ordinal directions. The last one is for no wind direction

directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

# The following section sets the base temperatures used for the

# calculation of heating, cooling, and growing degree-days.

[[[[DegreeDays]]]]

# Base temperature for heating days, with unit:

heating_base = 65, degree_F

# Base temperature for cooling days, with unit:

cooling_base = 65, degree_F

# Base temperature for growing days, with unit:

growing_base = 50, degree_F

# A trend takes a difference across a time period. The following

# section sets the time period, and how big an error is allowed to

# still be counted as the start or end of a period.

[[[[Trend]]]]

time_delta = 10800 # 3 hours

time_grace = 300 # 5 minutes

# The labels to be used for each observation type

[[[Labels]]]

# Set to hemisphere abbreviations suitable for your location:

hemispheres = N, S, E, W

# Formats to be used for latitude whole degrees, longitude whole

# degrees, and minutes:

latlon_formats = %02d, %03d, %05.2f

# Generic labels, keyed by an observation type.

[[[[Generic]]]]

barometer = Barometer

dewpoint = Dew Point

ET = ET

heatindex = Heat Index

inHumidity = Inside Humidity

inTemp = Inside Temperature

outHumidity = Humidity

outTemp = Outside Temperature

radiation = Radiation

rain = Rain

rainRate = Rain Rate

UV = UV Index

windDir = Wind Direction

windGust = Gust Speed

windGustDir = Gust Direction

windSpeed = Wind Speed

windchill = Wind Chill

windgustvec = Gust Vector

windvec = Wind Vector

extraTemp1 = Temperature1

extraTemp2 = Temperature2

extraTemp3 = Temperature3

# Sensor status indicators

rxCheckPercent = Signal Quality

txBatteryStatus = Transmitter Battery

windBatteryStatus = Wind Battery

rainBatteryStatus = Rain Battery

outTempBatteryStatus = Outside Temperature Battery

inTempBatteryStatus = Inside Temperature Battery

consBatteryVoltage = Console Battery

heatingVoltage = Heating Battery

supplyVoltage = Supply Voltage

referenceVoltage = Reference Voltage

[[[Almanac]]]

# The labels to be used for the phases of the moon:

moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent

##############################################################################

# This service acts as a filter, converting the unit system coming from

# the hardware to a unit system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once

# chosen it cannot be changed without converting the entire database.

# Modification of target_unit after starting weewx will result in

# corrupt data - the database will contain a mix of US and METRIC data.

# The value of target_unit does not affect the unit system for

# reporting - reports can display US, Metric, or any combination of units.

# In most cases, target_unit should be left as the default: US

# In particular, those migrating from a standard wview installation

# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!

target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

# This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]

# For each type, an arbitrary calibration expression can be given.

# It should be in the units defined in the StdConvert section.

# Example:

foo = foo + 0.2

##############################################################################

# This section is for quality control checks. If units are not specified,

# values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]

barometer = 26, 32.5, inHg

pressure = 24, 34.5, inHg

outTemp = -40, 120, degree_F

inTemp = 10, 120, degree_F

outHumidity = 0, 100

inHumidity = 0, 100

windSpeed = 0, 120, mile_per_hour

rain = 0, 10, inch

##############################################################################

# This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]

# How to calculate derived quantities. Possible values are:

# hardware - use the value provided by hardware

# software - use the value calculated by weewx

# prefer_hardware - use value provide by hardware if available,

# otherwise use value calculated by weewx

pressure = prefer_hardware

altimeter = prefer_hardware

appTemp = prefer_hardware

barometer = prefer_hardware

cloudbase = prefer_hardware

dewpoint = prefer_hardware

ET = prefer_hardware

heatindex = prefer_hardware

humidex = prefer_hardware

inDewpoint = prefer_hardware

maxSolarRad = prefer_hardware

rainRate = prefer_hardware

windchill = prefer_hardware

windrun = prefer_hardware

##############################################################################

# For hardware that supports it, this section controls how often the

# onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)

clock_check = 14400

# How much it can drift before we will correct it (in seconds)

max_drift = 5

##############################################################################

# This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval

# will be downloaded from the station. Otherwise, specify it (in seconds).

archive_interval = 300

# If possible, new archive records are downloaded from the station

# hardware. If the hardware does not support this, then new archive

# records will be generated in software.

# Set the following to "software" to force software record generation.

record_generation = hardware

# Whether to include LOOP data in hi/low statistics

loop_hilo = True

# The data binding used to save archive records

data_binding = wx_binding

##############################################################################

# This section binds a data store to a database.

[DataBindings]

[[wx_binding]]

# The database must match one of the sections in [Databases].

# This is likely to be the only option you would want to change.

database = archive_sqlite

# The name of the table within the database

table_name = archive

# The manager handles aggregation of data for historical summaries

manager = weewx.manager.DaySummaryManager

# The schema defines the structure of the database.

# It is *only* used when the database is created.

schema = schemas.wview_extended.schema

##############################################################################

# This section defines various databases.

[Databases]

# A SQLite database is simply a single file

[[archive_sqlite]]

database_name = weewx.sdb

database_type = SQLite

# MySQL

[[archive_mysql]]

database_name = weewx

database_type = MySQL

##############################################################################

# This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases

[[SQLite]]

driver = weedb.sqlite

# Directory in which the database files are located

SQLITE_ROOT = /var/lib/weewx

# Defaults for MySQL databases

[[MySQL]]

driver = weedb.mysql

# The host where the database is located

host = localhost

# The user name for logging in to the host

user = weewx

# The password for the user name (quotes guard against parsing errors)

password = weewx

##############################################################################

# This section configures the internal weewx engine.

[Engine]

# The following section specifies which services should be run and in what order.

[[Services]]

prep_services = weewx.engine.StdTimeSynch

data_services = ,

process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate

xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater

archive_services = weewx.engine.StdArchive

restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS

report_services = weewx.engine.StdPrint, weewx.engine.StdReport

syslog:

Dec 31 13:30:39 raspberrypi systemd[1]: Starting LSB: weewx weather system...

Dec 31 13:30:41 raspberrypi weewx[2096] INFO __main__: Initializing weewx version 4.2.0

Dec 31 13:30:41 raspberrypi weewx[2096] INFO __main__: Using Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]

Dec 31 13:30:41 raspberrypi weewx[2096] INFO __main__: Platform Linux-5.4.79+-armv6l-with-debian-10.7

Dec 31 13:30:41 raspberrypi weewx[2096] INFO __main__: Locale is 'en_GB.UTF-8'

Dec 31 13:30:41 raspberrypi weewx[2096] INFO __main__: PID file is /var/run/weewx.pid

Dec 31 13:30:41 raspberrypi weewx[2085]: Starting weewx weather system: weewx.

Dec 31 13:30:41 raspberrypi systemd[1]: Started LSB: weewx weather system.

Dec 31 13:30:42 raspberrypi weewx[2100] INFO __main__: Using configuration file /etc/weewx/weewx.conf

Dec 31 13:30:42 raspberrypi weewx[2100] INFO __main__: Debug is 1

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG __main__: Initializing engine

Dec 31 13:30:42 raspberrypi weewx[2100] INFO weewx.engine: Loading station type WeatherFlowUDP (user.weatherflowudp)

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: driver version is 1.10

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: sensor map is {'outTemp': 'air_temperature.ST-00000025.obs_st', 'outHumidity': 'relative_humidity.ST-00000025.obs_st', 'pressure': 'station_pressure.ST-00000025.obs_st', 'outTempBatteryStatus': 'battery.ST-00000025.obs_st', 'windSpeed': 'wind_speed.ST-00000025.rapid_wind', 'windDir': 'wind_direction.ST-00000025.rapid_wind', 'UV': 'uv.ST-00000025.obs_st', 'rain': 'rain_accumulated.ST-00000025.obs_st', 'windBatteryStatus': 'battery.ST-00000025.obs_st', 'radiation': 'solar_radiation.ST-00000025.obs_st'}

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: *** Sensor names per packet type

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_air: ('time_epoch', 'station_pressure', 'air_temperature', 'relative_humidity', 'lightning_strike_count', 'lightning_strike_avg_distance', 'battery', 'report_interval')

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_sky: ('time_epoch', 'illuminance', 'uv', 'rain_accumulated', 'wind_lull', 'wind_avg', 'wind_gust', 'wind_direction', 'battery', 'report_interval', 'solar_radiation', 'local_day_rain_accumulation', 'precipitation_type', 'wind_sample_interval')

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet rapid_wind: ('time_epoch', 'wind_speed', 'wind_direction')

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet evt_precip: time_epoch

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet evt_strike: ('time_epoch', 'distance', 'energy')

Dec 31 13:30:42 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_st: ('time_epoch', 'wind_lull', 'wind_avg', 'wind_gust', 'wind_direction', 'wind_sample_interval', 'station_pressure', 'air_temperature', 'relative_humidity', 'illuminance', 'uv', 'solar_radiation', 'rain_accumulated', 'precipitation_type', 'lightning_strike_avg_distance', 'lightning_strike_count', 'battery', 'report_interval')

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdConvert

Dec 31 13:30:42 raspberrypi weewx[2100] INFO weewx.engine: StdConvert target unit is 0x1

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdQC

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.manager: Daily summary version is 2

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdWXXTypes

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdWXXTypes

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdPressureCooker

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdPressureCooker

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.wxxtypes.StdRainRater

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.wxxtypes.StdRainRater

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdArchive

Dec 31 13:30:42 raspberrypi weewx[2100] INFO weewx.engine: Archive will use data binding wx_binding

Dec 31 13:30:42 raspberrypi weewx[2100] INFO weewx.engine: Record generation will be attempted in 'hardware'

Dec 31 13:30:42 raspberrypi weewx[2100] INFO weewx.engine: Using archive interval of 300 seconds (specified in weewx configuration)

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive

Dec 31 13:30:42 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: StationRegistry: Station will be registered.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: Wunderground: Posting not enabled.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: PWSweather: Posting not enabled.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: CWOP: Posting not enabled.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdWOW

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: WOW: Posting not enabled.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.restx: AWEKAS: Posting not enabled.

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdPrint

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Loading service weewx.engine.StdReport

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport

Dec 31 13:30:43 raspberrypi weewx[2100] INFO __main__: Starting up weewx version 4.2.0

Dec 31 13:30:43 raspberrypi weewx[2100] DEBUG weewx.engine: Station does not support reading the time

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.manager: Starting backfill of daily summaries

Dec 31 13:30:43 raspberrypi weewx[2100] INFO weewx.engine: Starting main packet loop.

Dec 31 13:30:43 raspberrypi /weewxd: weatherflowudp: MainThread: Listening for UDP broadcasts to IP address <broadcast> on port 50222, with timeout 90 and share_socket False...

Dec 31 13:30:43 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421430, 422, 40, 0, 0]}

Dec 31 13:30:43 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421430, 0.0, 0]}

Dec 31 13:30:46 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421433, 422, 41, 0, 0]}

Dec 31 13:30:46 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'HB-00033798', 'type': 'hub_status', 'firmware_revision': '147', 'uptime': 64844, 'rssi': -16, 'timestamp': 1609421433, 'reset_flags': 'BOR,PIN,POR', 'seq': 6480, 'fs': [1, 0, 15675411, 524288], 'radio_stats': [25, 1, 0, 3, 47678], 'mqtt_stats': [2, 0]}

Dec 31 13:30:46 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421433, 0.58, 254]}

Dec 31 13:30:49 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421436, 422, 41, 0, 0]}

Dec 31 13:30:49 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421436, 0.76, 238]}

Dec 31 13:30:52 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421439, 423, 41, 0, 0]}

Dec 31 13:30:52 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421439, 0.89, 222]}

Dec 31 13:30:55 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421442, 423, 41, 0, 0]}

Dec 31 13:30:55 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421442, 0.67, 240]}

Dec 31 13:30:56 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'HB-00033798', 'type': 'hub_status', 'firmware_revision': '147', 'uptime': 64854, 'rssi': -17, 'timestamp': 1609421443, 'reset_flags': 'BOR,PIN,POR', 'seq': 6481, 'fs': [1, 0, 15675411, 524288], 'radio_stats': [25, 1, 0, 3, 47678], 'mqtt_stats': [2, 0]}

Dec 31 13:30:58 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421445, 422, 40, 0, 0]}

Dec 31 13:30:58 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421445, 0.54, 248]}

Dec 31 13:31:01 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421448, 422, 40, 0, 0]}

Dec 31 13:31:01 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421448, 0.85, 218]}

Dec 31 13:31:04 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421451, 422, 41, 0, 0]}

Dec 31 13:31:04 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421451, 0.8, 237]}

Dec 31 13:31:06 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'HB-00033798', 'type': 'hub_status', 'firmware_revision': '147', 'uptime': 64864, 'rssi': -16, 'timestamp': 1609421453, 'reset_flags': 'BOR,PIN,POR', 'seq': 6482, 'fs': [1, 0, 15675411, 524288], 'radio_stats': [25, 1, 0, 3, 47678], 'mqtt_stats': [2, 0]}

Dec 31 13:31:07 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421454, 422, 40, 0, 0]}

Dec 31 13:31:07 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421454, 0.49, 231]}

Dec 31 13:31:10 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421457, 421, 41, 0, 0]}

Dec 31 13:31:10 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421457, 0.31, 236]}

Dec 31 13:31:13 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421460, 421, 40, 0, 0]}

Dec 31 13:31:13 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421460, 0.63, 202]}

Dec 31 13:31:16 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'HB-00033798', 'type': 'hub_status', 'firmware_revision': '147', 'uptime': 64874, 'rssi': -16, 'timestamp': 1609421463, 'reset_flags': 'BOR,PIN,POR', 'seq': 6483, 'fs': [1, 0, 15675411, 524288], 'radio_stats': [25, 1, 0, 3, 47678], 'mqtt_stats': [2, 0]}

Dec 31 13:31:16 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421463, 420, 41, 0, 0]}

Dec 31 13:31:16 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421463, 0.76, 213]}

Dec 31 13:31:19 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421466, 420, 41, 0, 0]}

Dec 31 13:31:19 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421466, 0.63, 212]}

Dec 31 13:31:22 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421469, 418, 40, 0, 0]}

Dec 31 13:31:25 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421472, 418, 40, 0, 0]}

Dec 31 13:31:25 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421472, 0.67, 217]}

Dec 31 13:31:26 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'HB-00033798', 'type': 'hub_status', 'firmware_revision': '147', 'uptime': 64884, 'rssi': -16, 'timestamp': 1609421473, 'reset_flags': 'BOR,PIN,POR', 'seq': 6484, 'fs': [1, 0, 15675411, 524288], 'radio_stats': [25, 1, 0, 3, 47678], 'mqtt_stats': [2, 0]}

Dec 31 13:31:28 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421475, 417, 40, 0, 0]}

Dec 31 13:31:28 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421475, 0.27, 232]}

Dec 31 13:31:31 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'light_debug', 'hub_sn': 'HB-00033798', 'ob': [1609421478, 416, 40, 0, 0]}

Dec 31 13:31:31 raspberrypi /weewxd: weatherflowudp: MainThread: raw packet: {'serial_number': 'ST-00027775', 'type': 'rapid_wind', 'hub_sn': 'HB-00033798', 'ob': [1609421478, 0.58, 265]}

Tom Keffer

unread,

Dec 31, 2020, 10:06:15 AM12/31/20

to weewx-user

It looks like you are still using the sample sensor_map. The readme describes how to fill it in with your actual sensor IDs.

--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/aa3749fb-dc53-4b37-bc09-06076f26baaan%40googlegroups.com.

David Levine

unread,

Dec 31, 2020, 10:52:51 AM12/31/20

to weewx-user

Thank you Tom! I misinterpreted the action I needed to take at that step and thought the copy/paste was all that was needed and not also updating to my individual station value.

Thank you again for the super fast response and accurate diagnostic. Happy New Year!
David

Reply all

Reply to author

Forward

0 new messages