Current Conditions are all N/A - stale data, WUnderground working though? (maybe)

28 views
Skip to first unread message

Jacob Mann

unread,
Jun 10, 2020, 2:12:07 PM6/10/20
to weewx-user
A short while back, my Acurite 01035 hooked up via Raspberry Pi stopped showing "current conditions"


The Wunderground page also showed 0degrees when you logged into it... but both Wunderground and the local webpage maintained highs/lows.
My receiver itself seems to be working fine.

When I run sudo tail -f /var/log/syslog --- I get the following -- seeing a lot of "stale data"

[output from syslog]
Jun 10 13:58:15 wx weewx[3000] INFO weewx.restx: WOW: Posting not enabled.
Jun 10 13:58:15 wx weewx[3000] INFO weewx.restx: AWEKAS: Posting not enabled.
Jun 10 13:58:15 wx weewx[3000] INFO __main__: Starting up weewx version 4.1.1
Jun 10 13:58:15 wx weewx[3000] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Jun 10 13:58:15 wx weewx[3000] INFO weewx.manager: Starting backfill of daily summaries
Jun 10 13:58:15 wx weewx[3000] INFO weewx.engine: Starting main packet loop.
Jun 10 13:58:15 wx weewx[3000] INFO weewx.drivers.acurite: R1: ignoring stale data (rssi indicates no communication from sensors): 01 09 0f 71 00 77 18 17 00 00
Jun 10 13:58:33 wx weewx[3000] INFO weewx.drivers.acurite: R1: ignoring stale data (rssi indicates no communication from sensors): 01 09 0f 71 00 77 18 17 00 00
Jun 10 13:58:52 wx weewx[3000] INFO weewx.drivers.acurite: R1: ignoring stale data (rssi indicates no communication from sensors): 01 09 0f 71 00 77 18 17 00 00
Jun 10 13:59:10 wx weewx[3000] INFO weewx.drivers.acurite: R1: ignoring stale data (rssi indicates no communication from sensors): 01 09 0f 71 00 77 18 17 00 00
Jun 10 13:59:28 wx weewx[3000] INFO weewx.drivers.acurite: R1: ignoring stale data (rssi indicates no communication from sensors): 01 09 0f 71 00 77 18 17 00 00

The sensor status says signal quality is 0%, and the battery is low. But the inside display where the USB is plugged into is displaying all data as expected. Updates and everything else.

It's also pulling inside temp and outside wind just fine. So where's the other data??




Reply all
Reply to author
Forward
0 new messages