Odd MQTT & Belchertown skin interaction.

[Tim Tuck]

Hi all,

I have "Cloud Base" on my front page and it shows like below when first accessing my server

Once MQTT kicks in it does this ...

I've checked my config a couple of times but I cant see what might be causing this!

You can see this for yourselves here... http://metoffice.skybase.net/weewx/belchertown/

Any ideas of what to look at appreciated. I didn't do this on my other server.:-[

thanks

Tim

Extension Name    Version   Description
Belchertown       1.2       A clean modern skin with real time streaming updates and interactive charts. Modeled after BelchertownWeather.com
GW1000            0.1.0b12  WeeWX driver for GW1000 WiFi gateway.
mqtt              0.23      Upload weather data to MQTT server.
aqi               1.3       Calculates air quality indexes.

[Arend]

Hi Tim,

This worked for me:

In weewx.conf find these leafs:

    [[Defaults]]

        [[[Units]]]

            # The following section overrides the label used for each type of unit

            [[[[Labels]]]]

                meter = " meter", " meters"    # You may prefer "metre".                

                day = " day", " days"

                hour = " hour", " hours"

                minute = " minute", " minutes"

                second = " second", " seconds"

                NONE = ""

Edit/remove one of the options for meter, so you get meter = " meter" or meter = " meters" (or what ever you prefer).

Restart weewx, wait for weewx to generate a new set of files, then refresh your browser.

Op donderdag 24 september 2020 om 07:48:38 UTC+2 schreef ti...@skybase.net:

[Tim Tuck]

Hi Arend,

Yep - that was it!

thanks

Tim