Heeft iemand 485solar-get werkend ?

[Ronald Jochems]

Hallo,

Heeft iemand de SMA tool 485solar-get werkend in Websolarlog ? 

Qua compilatie is het me wel gelukt, maar nu nog in de GUI ?

root@raspberrypi:/# yasdishell /etc/yasdi.ini 

************************************************************

        YASDI Mini Shell (build for Linux) 

      (This is an test program using YASDI)

************************************************************

Switching driver 'COM1' on...success

Command ('?' for help): ?

Commands:

 ? : This help...

 e : Start device detection (sync)

 b : Start device detection (async)

 z : Stop (async) device detection

 d : Show device list

 a : Show spot channel values

 p : Show parameter channel values

 t : Show test channel values

 s : Set parameter

 m : Remove device

 l : Change access level

 q : Exit

Command ('?' for help): b

Starting device detection (async).

How many devices should be searched? 1

Ok, Device detection is now in progress...

Command ('?' for help): New device found: 'WR17-041 SN:2001183530'

..................................

Async Device Detection finished. 1 devices available.

-------------------------------------------

Device handle | Device Name  

-------------------------------------------

     1        | 'WR17-041 SN:2001183530'

-------------------------------------------

q

Switching driver 'COM1' off...

root@raspberrypi:/# 

[Ronald Jochems]

Hi All,

It seems that 485solar_get does function on the command line ( i was using two loggers on the rs485 bus which apparantly is not allowed)  , but i have difficulties within Websolarlog to get it working... 

I have made two screenshot, maybe someone can give me some advice what i am missing ?

[Ronald Jochems]

As last, a output of the CLI : 

root@raspberrypi:/usr/share/nginx/www/websolarlog# 485solar-get -i

1   WR17-041 SN:2001183530

Software-BFR 2.640000 

SMA-SN 2001183530.000000 

Default -1.000000 

Status Mpp

Betriebsart Mpp-Betrieb

485solar-get v1.000 daemon: Down

root@raspberrypi:/usr/share/nginx/www/websolarlog# 

[Martin Diphoorn]

Hi Ronald,

have you got this working?

I have been able to get sma_get working on rs485 interface.

Looking at your screenshot i see nothing wrong.
Can't confirm that your absolute path is okay.

[Rüdiger Hopper Bentz]

I might be able to help if this is still an issue.

[Markus Markus]

Hi Rüdiger!

I have same problem. 485solar get wont work with websolarlog. Can you help?

Rx

[Rüdiger Hopper Bentz]

Hi Markus,

Can you tell me what Inverter(s) you are using?
To answer you question, I would also need a printout of the yasdishell output.

Cheers

[S VdHeyden]

I have exact the same problem. I have a smajor sunnyboy sb3300. The test in communication part indicate succes. However no data is collected. In click using 485solar-get -i I get device time out no device found. Some advice will be welcome

Thanks

[Markus Markus]

Hi again,

Ok yasdihell output. And which parameters?

Tx