Customize data going to pvoutput

[André M.]

Hi

I would like to be able to choose which data goes to pvoutput.

For example, the Voltage is now the mains (230V) but I think it's more interesting to see the MPP voltage.

Other pvoutput users display the MPP or panel DC voltage.

Tx

André

[Marco]

Hi André,

I see what you mean, but the problem in this is that (as far is a know) PVoutput could not handle multiple voltages from inverters with multiple MPP's.

For example;

My PowerOne has 2 MPP's and in this case has 2 DC voltages and we can't post them to PVoutput.

The same thing is with the Temperature, some post the inverter (booster) temp. , others send the ambiance temp., and so on.

We will discus this and see if we can make this possible from version 2.0.

Regards,

Marco

[André M.]

I have only one string so it would be nice if I could choose the MPP or DC of the panels.

For more MPP's pvoutput would have to add it, but most of the users don't have any voltage to show.

André

[Marco]

In your case there is 1 MPP and 1 DC voltage, but we need to deal with a variation of inverter with 1,2,3,.... MPP's.

And if we make it possible to post them to PVoutput, PVoutput can not handle these values.

Another problem is;

A lot of people that have a >1 MPP's, have different panel counts on there MPP's.

In my case i have 2 MPP's; 1 with 10 panels and 1 with 8 panels both with different voltages on the strings.

Which voltage do i need/want to post to PVoutput? 

This case has a lot of issues in it, but where going to look at it!

We let you no what we are going to do :)

[JanPedaal]

Hi Marco,

Any news on this issue?

I would like to show MPP voltage instead of grid voltage, just like Andre M.