WebSolarLog

It is not the domain registration, but it is the server that will change. The old server wont survive

solved with a cheap usb rs485 interface replacing the serial port rs232 <-> rs485 interface has

Hi, abstract : I managed to integrate Steca coolcept inverter into websolarlog. Because the lack of

I have a Diehl Platinum 3000H by the way..

Hi again, Ok yasdihell output. And which parameters? Tx

The uri I use is just the following and maybe the problem is located here: uri: /usr/bin/485Solar-get

I get a test failure as well, but the weather data is loaded fine: Note that adress = 2 is filled in

Most off the time this can be fixed by stopping wsl and making sure nothing is running. Also kill the

Well at the moment it is not possible. Also there is almost no development at the project. I want to

There are lots of ways to edit an database. Most off the time i use sqlite3 to edit it. But that is

Hi I have been trying to get my friends SMA SB2500 to work with WSL, but 485solar get keeps failing

I think that you did something strange with configuring the panels. Why are there 2 sets of panels on

To reply myself, the used image was the problem, I re-installed it with Raspbian Wheezy and all is

Hi Peter, are there any messages in the log files? Do you know how to access the database? Check how

Abandoned is it not. However i am missing the time too support it at the moment. I want to rebuild

Hello I am interested in a similar solution..you have done something in it ?? Thank you George

Awesome! My installation will arrive in a few weeks. I'll start experimenting with this asap by

Hoi Marco (ea). Hoewel ik totaal geen programmeeur ben en php niet mijn ding is, ben ik toch eens

The PVo job runs every 75 seconds and the sees if there's data available that can be send to PVo.

Hi Michael, Sorry for not replying any sooner but I was not able to as I'm recovering form a

Hoi Eelske, Ik heb hier al in een threat (https://groups.google.com/forum/embed/?place=forum/

Hi Marco, Any news on this issue? I would like to show MPP voltage instead of grid voltage, just like

Hi Oosterlo, Not sure if you made a typo but the correct path would be /usr/share/nginx/www/

Hi I've installed Wsl on my new Rpi 2 with Raspbian. When the old trunk worked I updated to

WSL needs to connect to your inverter by IP. So you have to enable the webserver or something like

Robert , is dit jou nog gelukt? Het lukt mij niet om de wsl.sh te starten en ook de update pagina

Haha. Heb ik net uitgebreid antwoord zitten geven in je vorige draadje, zie ik hier dat je het al aan

Sorry Paul, had hier al een hele tijd niet meer gekeken. Op welke instellingen loop je vast?

Hmm, well it is not all hunky-dory with this suggested change. PVoutput stopped processing my

DST is/was still/known issue and probably will be for a while. I have no time to fix it and its a

Thank You for help, I update with you guide and now it work. The version displayed it's the old