Skip to first unread message
David George
Apr 11, 2014, 5:43:45 AM4/11/14
to wattza...@googlegroups.com
Jarek Poświata
Aug 13, 2014, 3:35:02 PM8/13/14
to wattza...@googlegroups.com
Video speed (current for position) might be shown all the time.
It would be useful to "race" against authors.
Ciro Semprebon
Sep 14, 2014, 10:17:22 AM9/14/14
to wattza...@googlegroups.com
Hi David.
I was away from my indoor trainer for long (after all it was summer) but now I am back on it.
I have the speed sensor, so I did not really need the standalone mode, but recently I thought
to try making my own RLV. When it comes to the point of checking the synchronization between
video and control files, your software would be perfect, i the standalone mode.
However, when trying the standalone mode as in your video instructions above here,
it does not work at all, (either mine or downloaded videos) and I do not understand what I am
doing wrong. In principle I should load the rlv file, as for the normal mode, and just click play.
When I set simulspeed, which option goes in the panel below?
Unfortunately, the time passes, but the video does not proceed.
Ciro
I was away from my indoor trainer for long (after all it was summer) but now I am back on it.
I have the speed sensor, so I did not really need the standalone mode, but recently I thought
to try making my own RLV. When it comes to the point of checking the synchronization between
video and control files, your software would be perfect, i the standalone mode.
However, when trying the standalone mode as in your video instructions above here,
it does not work at all, (either mine or downloaded videos) and I do not understand what I am
doing wrong. In principle I should load the rlv file, as for the normal mode, and just click play.
When I set simulspeed, which option goes in the panel below?
Unfortunately, the time passes, but the video does not proceed.
Ciro
Ciro Semprebon
Oct 25, 2014, 8:43:52 AM10/25/14
to wattza...@googlegroups.com
Finally I understood what what was going wrong: I did not introduced a Functional threshold Power
and the Hearth Rate . So of course the speed was zero !
Ok, probably I was very negligent in reading the manual, but it might be useful
to stress the point, or to release the software with some values preset that
allow it to work.
Anyway, I completed my first RLV, and I would like to share it. There is
space to improve the quality, but that can be done in the next one.
Ciro
and the Hearth Rate . So of course the speed was zero !
Ok, probably I was very negligent in reading the manual, but it might be useful
to stress the point, or to release the software with some values preset that
allow it to work.
Anyway, I completed my first RLV, and I would like to share it. There is
space to improve the quality, but that can be done in the next one.
Ciro
Reply all
Reply to author
Forward
0 new messages