Good Morning,
Please refer to the quote below from Jeremy at Blackthorn Electric concerning the motion sensor lighting that you had requested.
Myron Monson, CMCA®, AMS®
Community Association & Project Manager
my...@cwdgroup.com
Please click
here to complete a short Customer Satisfaction Survey

CWD Group, Inc. AAMC®
2800 Thorndyke Avenue West
Seattle, Washington 98199
206-706-8000 Main | 206-706-7679 Fax |
www.cwdgroup.com
![]()
From: jer...@blackthornelectric.com <jer...@blackthornelectric.com>
Sent: Monday, September 16, 2019 4:12 PM
To: Myron Monson <my...@cwdgroup.com>
Subject: RE: Motion sensor controlled fixture
Myron,
Here is the estimate for adding a fixture and having it controlled by a motion sensor. The motion sensor will be located at the South end of a 4' fixture closest to the elevators and away from the garage door. I will need to remove some of the rigid insulation to avoid drilling into conduit, plumbing or any other objects hidden under the insulation. I should be able to reinstall the insulation and support it with the fixture supports but cannot guarantee reinstalling the insulation.
Estimate
$600 plus tax
Included
Installing fixture
Installing motion sensor
Installing wiring from nearest fixture available
Exclusions
Repair of insulation
Above this location?
Sent from my iPhone
--
You received this message because you are subscribed to the Google Groups "Waterford North Board" group.
To unsubscribe from this group and stop receiving emails from it, send an email to waterford-north-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/waterford-north-board/5d811695.1c69fb81.4fb50.b4fb%40mx.google.com.
CWD Group, Inc. AAMC®
2800 Thorndyke Avenue West
Seattle, Washington 98199
206-706-8000 Main | 206-706-7679 Fax | www.cwdgroup.com
From: jer...@blackthornelectric.com <jer...@blackthornelectric.com>
Sent: Monday, September 16, 2019 4:12 PM
To: Myron Monson <my...@cwdgroup.com>
Subject: RE: Motion sensor controlled fixture
Myron,
Here is the estimate for adding a fixture and having it controlled by a motion sensor. The motion sensor will be located at the South end of a 4' fixture closest to the elevators and away from the garage door. I will need to remove some of the rigid insulation to avoid drilling into conduit, plumbing or any other objects hidden under the insulation. I should be able to reinstall the insulation and support it with the fixture supports but cannot guarantee reinstalling the insulation.
Estimate
$600 plus taxIncluded
Installing fixture
Installing motion sensor
Installing wiring from nearest fixture available
Exclusions
Repair of insulation
Above this location?
Sent from my iPhone