You do not have permission to delete messages in this group
Copy link
Report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to wand...@googlegroups.com
Hi,
I am working on wandboard quad and compiled yocto image for the same. I have inserted the sd card with yocto image on to SD3 slot (the one on CPU board). Board is up and I can see root login.
I am trying to run hello world on wandboard.
I have cross compiled it on my pc and wondering how do copy it to target.
I have copied the cross compiled exe to another sd card and inserted it on to SD4 slot (slot on base board). Now I can't find out how do I copy the file on to wandboard. Below are the last few lines on boot messages & I can see my sd card getting detected
Can some one please let me know how do I access files from my SD card slot
[ 4.885310] mmc2: host does not support reading read-only switch. assuming write-enable. [ 4.926360] mmc2: new high speed SD card at address b368 [ 4.940289] mmcblk1: mmc2:b368 SD02G 1.81 GiB [ 4.952032] mmcblk1: p1 Configuring network interfaces... [ 5.392006] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) udhcpc (v1.21.1) started Sending discover... [ 8.389903] PHY: 1:01 - Link is Up - 100/Full Sending discover... Sending discover... Sending select for 10.96.42.148... Lease of 10.96.42.148 obtained, lease time 691200 /etc/udhcpc.d/50default: Adding DNS 10.96.132.19 /etc/udhcpc.d/50default: Adding DNS 10.0.20.57 done. hwclock: can't open '/dev/misc/rtc': No such file or directory Wed Feb 4 10:44:00 UTC 2015 INIT: Entering runlevel: 5misc/rt hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done Stopping Bootlog daemon: bootlogd.