ADB over USB OTG support.

[yoon jeesoo]

Hello.

I've got wandboard solo and booted successfully from sdcard with Android Jellybean image.

When I've insert USB OTG cable to the board to use ADB. My windows PC is not aware of USB Device.

so I can't use ADB on my PC.

Is it still under development?

I've attached usbview application capture image to present my problem.

[yoon jeesoo]

Are there anyone to use ADB over USB?

2013년 5월 7일 화요일 오후 6시 25분 46초 UTC+9, yoon jeesoo 님의 말:

[John Marland]

Last I heard it's not done yet.

....JW

[Clay D. Montgomery]

I just got my Android Debug Bridge (ADB) connection working through the USB OTG port on my WandBoard Quad.  I am using a male USB A to male USB mini type cable that came with an IOGear USB hub (with card reader) that I already had.

Here are some tips:

1.  You must first have Android booted and running on the WandBoard.  I am using the Jelly Bean 4.2.2 image provided in the list of official images.

2.  Windows does not find the required MTP driver automatically.  I had to point the New Hardware Found Wizard to this file to get it installed:
       C:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf

3.  This driver should then show up in the Windows Device Manager as "Other Devices / MTP".

Regards, Clay