Issue 35 in vtuner: VTUNER_SET_FE_INFO failed - Inappropriate ioctl for device

[vtu...@googlecode.com]

Status: New
Owner: ----
Labels: Type-Defect Priority-Medium

New issue 35 by silvio.v...@hotmail.it: VTUNER_SET_FE_INFO failed -
Inappropriate ioctl for device
http://code.google.com/p/vtuner/issues/detail?id=35

What steps will reproduce the problem?
1. VTUNER_SET_FE_INFO failed - Inappropriate ioctl for device
2. DVBAPI 5.5 is used, Linux 3.3.8
3.

What is the expected output? What do you see instead?

root@gbquad:~# vtunerc.mipsel -f t:1 -v 4 -d /dev/vtuner0
vtunerc: vtuner client (vtunerc), part of vtuner project
Visit http://code.google.com/p/vtuner/ for more information
Copyright (C) 2009-11 Roland Mieslinger
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
vtunerc: Revision:63f73de8b63c+/tip/dirty DVB:5.3 allow:5.x NetProto:2
MsgSize:96, Debug:4
vtunerc: [1879 ../../vtunerc.c:452] info: added frontend mode DVB-T as
mode 0, searching for tuner types 4
vtunerc: [1879 ../../vtunerc.c:533] info: Created pidfile
/var/run/vtunerc0.pid
vtunerc: [1879 ../../vtunerc.c:562] info: Box is a gbquad
vtunerc: [1879 ../../vtunerc.c:586] info: no server connected. discover
thread is 0 (DWS_IDLE:0, DWS_RUNNING:1)
vtunerc: [1879 ../../vtunerc.c:588] info: changing frontend mode to DVB-T
vtunerc: [1879 ../../vtunerc.c:613] error: VTUNER_SET_FE_INFO failed -
Inappropriate ioctl for device
root@gbquad:~#
What version of the product are you using? On what operating system?
Enigma2 OpenPLI 3 Mipsel box

Please provide any additional information below.
dmesg:
usbcore: registered new interface driver dvb_usb_af9035
usb 3-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802
usb 3-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
usb 3-1: dvb_usb_af9035: firmware version=12.5.13.0
usb 3-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the
software demuxer
DVB: registering new adapter (AVerMedia HD Volar (A867))
i2c i2c-0: af9033: firmware version: LINK=12.5.13.0 OFDM=6.8.13.0
usb 3-1: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
mxl5007t 0-0060: creating new instance
usb 3-1: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 3-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized
and connected


vtunerc0: Data are shorter then TS packet size (188B)
DVB: registering adapter 0 frontend 0 (vtuner fe)...
-----
root@gbquad:~# ls /dev/dvb/adapter1
demux0 dvr0 frontend0 net0
root@gbquad:~#


--
You received this message because this project is configured to send all
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings

[vtu...@googlecode.com]

Comment #1 on issue 35 by jpetrous: VTUNER_SET_FE_INFO failed -

Inappropriate ioctl for device
http://code.google.com/p/vtuner/issues/detail?id=35

Did you try to compile the mips binary for your box? You said it was DVB
API 5.5 but the binary was compiled for DVB API 5.3 ("vtunerc:
Revision:63f73de8b63c+/tip/dirty DVB:5.3 ..."). It may help.