Alto 1202 Manual

[Silvana Fleischacker]

SupportForthe latest information about this product (system requirements, compatibility information, etc.) and product registration, visit altoprofessional.com.

For additional product support, visit altoprofessional.com/support.

Please note: Alto Professional and in Music are not responsible for the use of its products or the misuse of this information for any purpose. Alto Professional and in Music are not responsible for the misuse of its products caused by avoiding compliance with inspection and maintenance procedures. Please also refer to the included safety and warranty manual for more information.Caution: To reduce the risk of electric shock, do not connect a TX3 Series loudspeaker to a power outlet while the grille is removed.

Permanent hearing loss may be caused by exposure to extremely high noise levels. The U.S. Occupational Safety and Health Administration (OSHA) has specified permissible exposures to certain noise levels. According to OSHA, exposure to high sound pressure levels (SPL) in excess of these limits may result in hearing loss. When using equipment capable of generating high SPL, use hearing protection while such equipment is under operation.SetupVolume Control (TX308 & TX310 only)

The TX308 and TX310 loudspeakers accept both line-level and mic-level audio sources. Before connecting your audio source, turn the Volume knob to the minimum position (fully counter-clockwise).

If the Signal Limit LED is lit red constantly or the sound is distorted, do not advance the Volume knob any further. Doing so may damage your TX3 loudspeaker. Reduce the signal level of your sound source, or lower the volume with the Volume knob.

Trademarks & LicensesAlto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other product names, company names, trademarks, or trade names are those of their respective owners.

3a8082e126