Setting up Vonage D-Link VTA-VR

[howto voip]

This guide will help you setup your D-Link Broadband Telephone Adapter
(VTA-VR) from Vonage using Smart Bro connection. This guide also works
on any service provider in the Philippines.

Requirements

Vonage D-Link VTA-VR - 1 internet/WAN port (rj45), 2 telephone ports
(rj11)
Router with Enabled DHCP (Linksys WRT54GC, Mikrotik RouterOS, Linksys
WRT54G,all D-Link routers etc.)
Touchtone telephone (cord or cordless)

Vonage D-Link VTA-VR Setup Diagram

Connecting Vonage D-Link VTA-VR to the Network

1. Plug in the touchtone telephone to Vonage D-Link VTA-VR’s telephone
port 2

2. Plug in the Vonage D-Link VTA-VR to any of the vacant ports of your
Router with Enabled DHCP

3. Turn on the Vonage D-Link VTA-VR.

4. Once initialized, all LEDs should light up. Pick up the phone and
you should be able to get a dial tone.

You cannot connect Vonage D-Link VTA-VR directly to a smart bro
connection due to device provisioning problem, but theres a workaround
for this, MAC cloning.