Audi Radio Safe Mode Reset

0 views
Skip to first unread message

Cloris Sopha

unread,
Aug 4, 2024, 4:49:28 PM8/4/24
to visomina
Hipeeps. My sister has a 98' 1.8T Sport and it's been sitting since May. The battery died so I had to fit a new one today. I'm in the process of cleaning and selling it for her but the Radio has gone into 'safe mode'. What does this mean?

Press the SCAN and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.


Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.


If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.

3a8082e126
Reply all
Reply to author
Forward
0 new messages