Hi Thomas
If you installed SECN firmware on a MR3020 device then the IP address it will appear on by default is 10.130.1.20
By default there will be no DHCP service running so you will need to configure you PC with a static IP address to connect to it.
If you look on the VillageTelco Wiki web page you will find a User Guide for SECN 3 which may be helpful.
Regards
Terry
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAF%2B_gg92pOj-L6jj1B6G5KqhGJ56yQAs5LWbu0v%3DwvV9U4XK4w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAD58EkzfRvSZ0n0_COxUT1nCryLA49VfbT8q-ixkKkjROOn6cg%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/CAF%2B_gg8POoo944jxYOfomG00E2eUaCaj_jkMb6q%2Bg1Z62S6dAw%40mail.gmail.com.