Hi Manfred
Softphone Client mode is only used for the MP with a built in FXS facility.
This mode allows the FXS to interoperate with softphone devices.
Regards
Terry
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/63efc4cb-406f-4ec2-8f0f-9bd591cc1b09%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hi Manfred
Asterisk is provided on these devices basically for use as a Softphone Master node if required.
If you are not using that then you are correct - there is no real point in having Asterisk enabled.
Regards
Terry
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/06710994-a5dc-45da-8c16-03c718799719%40googlegroups.com.