How are you connecting to the picostations - via wifi?
What IP address and Gateway/Default Route address is your connected device getting?
Probably best if you send some screen shots of the Advanced page and the WAN page for the gateway node and for the Picostation so we can see what your config is.
Make sure you get the whole of the Advanced page in your screen shots. It will require two shots to get top and bottom of the page.
Also a screenshot showing the connection info for the client device attached to the Picoststion.
T
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/112231cc-def0-43b8-9aaa-e6e128288bfc%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/a4f1c8a3-2096-4bcb-be72-b1e1b3af3d01%40googlegroups.com.
Hi AllI have noticed two cases on the switch which is connected to the LAN it keeps going out and i don't receive any connections but when they but i recieve surely when both cables are blinking. the cabe on the left hand side connected to a port in the LAN and the cable on the right hand side is the connected to the secondary port on the nanostation m2 to receive Internet.RegardsVusi
On Wednesday, September 24, 2014 11:17:02 PM UTC+2, Vusumzi Ndzengu wrote:Hi All
I have added five picostations to my ntework which consisted two nanosations and installed secn in all of them. one nanostation m2 is dedicated as a gateway with the ip10.130.1.10 and other devices given .11 .12 .13 .14 .15 .16.. i can see on the web under status tab that they are connected to each other and also i have successful pings. the issue when i can get internet access. the etting for the wan port are ok wan port disabled wan ip mode dhcp and change to wan ( secondary) ticked.
Regards
Vusi
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/a2b076e2-57f2-413e-b7f0-c0b85e037d33%40googlegroups.com.
Hi Vusumzi
That sounds like you have had a success!
Regards
Terry
--
You received this message because you are subscribed to the Google Groups "Village Telco Development Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to village-telco-...@googlegroups.com.
To post to this group, send email to village-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/village-telco-dev/a6fd0436-ea42-4583-aa81-50783bd108af%40googlegroups.com.