Attitude Adjustment Alpha 5 development snapshot
18 views
Skip to first unread message
elektra
May 17, 2012, 12:02:29 PM5/17/12
to village-...@googlegroups.com
Hi -
I have updated SECN to 1.1 RC2 in the Attitude Adjustment firmware and also fixed one issue with regards to the regdomain setting, which prevented the use of the WiFi channels 12 and 13. I think I can actually drop alpha-status for the firmware. Your feedback is welcome.
Besides:
http://en.wikipedia.org/wiki/List_of_WLAN_channels
is a good read.
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people experience themselves as a voice in their head, telling them
who they are, what they think and what they have to do.
http://en.wikipedia.org/wiki/Meme
I have updated SECN to 1.1 RC2 in the Attitude Adjustment firmware and also fixed one issue with regards to the regdomain setting, which prevented the use of the WiFi channels 12 and 13. I think I can actually drop alpha-status for the firmware. Your feedback is welcome.
Besides:
http://en.wikipedia.org/wiki/List_of_WLAN_channels
is a good read.
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people experience themselves as a voice in their head, telling them
who they are, what they think and what they have to do.
http://en.wikipedia.org/wiki/Meme
Keith Williamson
May 17, 2012, 3:06:19 PM5/17/12
to village-...@googlegroups.com
Hi Elektra,
Thanks for taking this on!
I have flashed a pair of MPs with the following images from your download site:
openwrt-atheros-2.6.37.6-alpha5-root.squashfs
openwrt-atheros-2.6.37.6-alpha5-vmlinix.lzma
Are these the correct images?
After flashing and using the IVR to update the IP addresses, I was unable to login with root/admin or admin/admin per SECN1.1 RC2. I also found that the WebUI is the older non-tabbed one from before 1.1 RC1.
What file set did you start with to merge in your changes? The two best choices would be:
or
The MP one is for SECN 1.1 RC2 under Kamikaze and theWR703 one is for SECN 1.1 RC2 under Attitude Adjustment. The MP one would most likely be the best to use since the MP WebUI is slightly different from the WebUI for the TP devices. The WR703 one would be needed for reference since it comprehends the differences due to the use of Attitude Adjustment. Of course, you might find doing it the opposite way might be easier. As I said in an earlier email, I tried starting with my MP SECN 1.1 RC2 file set but got myself all tangled up trying to figure out what changes pointed out by "diff" were due to your actual changes or changes that Terry and I had made to whatever your base was as we worked toward the SECN 1.1 RC2 feature set.
Apologies if I just stupidly grabbed up the wrong images from your download site.
Cheers,
Keith
--
You received this message because you are subscribed to the Google Groups "village-telco-dev" group.
To post to this group, send email to village-...@googlegroups.com.
To unsubscribe from this group, send email to village-telco-...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/village-telco-dev?hl=en.
T Gillett
May 17, 2012, 6:57:07 PM5/17/12
to village-...@googlegroups.com
Hi Elektra
I have put a patch together to convert AA RC1 to the tabbed web interface. I will check it out on your RC2 and let you know how it goes. That should help getting it up to date.
Regards
Terry
Reply all
Reply to author
Forward
0 new messages