usb modem using CentOS 5.5

[Rajat Gupta]

 Hi All,


I am using CentOS 5.5 but i am unable to connect usb modem .

Please file the below out put.
# lsusb
===================
Bus 006 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 
Bus 001 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552 (HSPA modem)
Bus 001 Device 001: ID 0000:0000 
Bus 007 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 005 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
====================

]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.

WvModem<*1>: Cannot get information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<Info>: No such device or address
Port Scan<*1>: S1  
ttyS2<Info>: No such device or address
Port Scan<*1>: S2  
ttyS3<Info>: No such device or address
Port Scan<*1>: S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wvdial/

If you still have problems, send mail to wvdia...@lists.nit.ca.
==============================

uname -r
2.6.18-194.el5xen


==================
[root@instructor ~]# cat /etc/redhat-release
CentOS release 5.5 (Final)

++++++++++++++++++++++



Please  HELP !!!!!


--
Rajat Gupta

[amey jagtap]

which usb modem r u using ??? 

--
Rajat Gupta

--
Please read http://www.catb.org/~esr/faqs/smart-questions.html before posting.
You received this message because you are subscribed to the "Vibrant GNU/Linux User Group".
To stop receiving emails from this group, mail to VGLUG+un...@googlegroups.com
To post to this group, send email to VG...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/VGLUG

--

"DON'T TELL ME THE SKY IS THE LIMIT, THERE ARE FOOTPRINTS ON THE MOON"

Thanks and Regards,
      Amey S. Jagtap
______________________

 

(9320533544 / 9969544963)

[Rajat Gupta]

Aircel

[Nirmal Pathak]

On 25 May 2012 18:00, Rajat Gupta <gra...@gmail.com> wrote:
> Aircel

Please Do Not Top-Post. Thanks!

Please check following link which may help you,
http://goinggnu.wordpress.com/2009/11/05/use-reliance-netconnect-datacard-with-ubuntu-linux/

>>>
>>> Please  HELP !!!!!
>>> --
>>> Rajat Gupta
>>>

Have FuN!
--
Nirmal D Pathak.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
What I want is freedom, not life, nor pleasure, nor good!
FOSS gives that.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Rajat Gupta]

Thanks but its not working .

[Nirmal Pathak]

On 25 May 2012 18:31, Rajat Gupta <gra...@gmail.com> wrote:
> Thanks but its not working .

Please do not Top Post!

What it not working? What steps have you tried?

Check one more link & troubleshoot the issue:

https://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&topic_id=26747&forum=40

You are using Huawei E1552 Model USB dongle & above link should help you.

You can also try latest Fedora OS for your modem. It should work out
of the box! ;)

[amey jagtap]

Download and install Huawei rpm by using following link

http://www.rcom.co.in/Rcom/personal/internet/wireless_internet.html 

after installation do modeprob

then check modem detected or not using dmesg command says converted modem or something like this 

now made changes accordingly in your wvdial.conf