Install Postgresql 14 On Windows 10
Boots Lucier
This is a step-by-step guide to install PostgreSQL on a windows machine. Since PostgreSQL version 8.0, a window installer is available to make the installation process fairly easier.
We will be installing PostgreSQL version 11.3 on Windows 10 in this article.
There are couple of ways to verify the installation of PostgreSQL like connecting to the database server using some client applications like pgAdmin or psql.
The quickest way though is to use the psql shell. For that follow the below steps:
I wanted to test my SQL calls against postgres as my app regular breaks when pushed up to production on Heroku because of the stricter requirements of postgres (which I think is probably a healthy thing) over sqlite 3. So I have a similar request to this for a not out of date tutorial for installing postgres for use with ruby on rails on windows (7) please. I thought it'd be a quick 20 minutes of downloading and installing but 2 and a bit hours later and I don't think I'm very close yet. So far I've:
I know I need to set up a user name and password for Postgres, maybe also start the postgres server, connect to it(?) and put in my local IP address I'll connect to it on into a config files somewhere and then edit one of the other .conf files in 'C:\Program Files (x86)\PostgreSQL\8.4\data' etc...
I think Rails has made me soft, am I over thinking things or is it actually fairly tricky to set up and I should just go back to Sqlite3, for which there's also the awesomely useful SQLite Manager, Firefox plugin?
I'm still searching for a beginners guide to installing and using Postgres for rails but so far have only been confused by most of the stuff I look at / tried following like this, this, this, this, this(for Snow Leopard), this(linux).
So the first thing to point out is that Postgres is not just a different file extension from .sqlite3, it's a whole mechanism for managing your databases. As such it has a client/server model, of which you'll need to set up both to use Postgres as the database for your rails app.
Motivation for going through considerable pain of Postgres setup versus almost effortless sqlite setup: if you're deploying to Heroku, they're currently using Postgres so some of your SQL calls that are fine on sqlite3 will break when used with Postgres. It's much easier to debug postgres locally rather than when it's on Heroku's servers.
So I did the following things:(Disclaimer: I may have forgotten to include some of the things I did... it took me over 48 hours of on and off pain to get it to work... if the following advice doesn't work for you then the huge (2300 pages!!) but very thorough Postgres documentation should help. I'd recommend downloading this anyway if you're serious about using Postgres as it has a lot of material that I've only just begun to understand the significance of.) (Second disclaimer: I have almost certainly broken 20 sensible Postgres guidelines and exposed security holes in the Postgres database whilst doing so. If there any obvious things an experienced Postgres user disagrees with, please edit my post.)
.Step 1. Download and install PostgreSQL v9.0.4-1 from here because here said only 9.0.x would be supported on windows 7. I kept all the default options and just used 'secret' as the password when prompted by the Postgres installer for one (again not entirely sure what the consequences of sharing that info on the internet is... will soon find out I'm sure). You'll need this password in step 3.
Don't forget to change access rights to folder PostgreSQL\9.0 and remove any default readonly rights on the folder or content.(You may also need to restart your computer for these to take effect - thanks @Gavin -although not likely).
.Step 3. Test Postgres installation by trying to create a new database:From command line: createdb -U postgres mydb_as_postgres. You should be prompted to enter the password now, if you're not it may be that you need to start the server first (I can't remember whether I needed to do this or not). The easiest way is through pgAdmin III, which should be 'pgAdmin3.exe' in a folder somewhere like C:\Program Files\PostgreSQL\9.0\bin. Once you've started pgAdmin III there should be a panel on the left called 'Object Browser'. In this there should be a tree with:
The createdb -U postgres mydb_as_postgres command should create a new databse called 'mydb_as_postgres' which you can check by firing up pgAdmin III and double clicking on 'PostgreSQL 9.0 (localhost:5432)'. Under this there should be:
I called it _as_postgres because the -U postgres part of the command tells Postgres to create the database with the postgres user as it's owner, which you need to specify when you're not signed in as the postgres user. I have all of my files stored as 'AJames' user though so if you're the same and want to keep developing your app when signed in as a different user you need to create a Postgres 'role' for that user now (see step 4).
Right-click on Login Roles and select 'New Login Role...'in Role name, put in your operating system user name, which for me is AJames,and fill in your password under the 'Role Privileges' tab, I checked all the boxes, but an experienced postgres user would likely strongly recommend to only check the 'inherits rights from parent roles' and the 'can create database objects' But I'm not an experienced user and just want to debug Rails SQL calls in Postgres so I also checked the 'Superuser' and 'Can create roles', just in case.
.Step 6. Okay, so you've got a development.sqlite3 file in your rails 'db/' directory. Initially I was going to set the next test as converting this from sqlite3 to psql.
I couldn't get this to work though but I left my attempts here as the solution I used required having the data in a Rails app on Heroku.com (see instead the solution from step 7 onwards). For those who only have a local app and no data in Heroku, they can't use the same approach, so they might need to explore something like this:
x6.3 Okay, next to try the conversion. Downloaded sqlite-shell precompiled binary for windows.
x6.4 Create a new directory, I used 'C:\temp' and put the sqlite3.exe and your development.sqlite3 files in it.
x6.5 Use the following commands (which are from here) to dump the development.sqlite3 database into Postgres.
Like I said, I couldn't get it to work. I'm sure there's a way of getting round that error but I thought of a different way and so I instead used this solution (which requires a Heroku account to have your data and does the conversion from sqlite3 to psql using the Taps gem (I believe):
.Step 7. in pgAdmin III I created another database. Under the properties tab I set name: 'development', owner: 'AJames' (replace this with your own Windows user name). And under the privileges tab, set role: 'public' and checked the ALL option (thought this resets to unchecked so I'm not sure that's necessary).
.Step 11. run heroku db:pull from your command line (again from in the root directory of your rails app) to pull all your data down and into your new empty Postgres database. I think at this point your taps gem will be doing this work for you.
None of your links appeared to be the (arguably) most useful documentation - the official postgresql docs. I recently configure a Linux Mint box with postgresql and django using a combination of those documents and these, though the latter are specific to Linux.
I'd worry more about validating the postgresql side of things, less about rails. That is to say, your question should be "How can I set up and test a postgresql server on a Windows 7 box", moreso than you need to know how to get it locked into rails.
The PostgreSQL database manages the multi-version concurrency control to manage the concurrency (MVCC). When we run a transaction on PostgreSQL, it gives the snapshot of the database, which allows each transaction to made changes on the database without affecting the other transaction. PostgreSQL has three levels of transaction isolation.
In this article, we are going to focus on the step-by-step installation process of PostgreSQL on windows 10. Before the installation, we must download the stable copy of the PostgreSQL 13 server from the location. We can use this installer to install PostgreSQL on windows in graphical and silent mode. The setup file contains the following software packages:
On the Port screen, specify the Port number on which the PostgreSQL server will listen to the incoming connections. By default, the PostgreSQL server listens on port number 5432. You can specify the non-default post on this screen. Make sure any other application must not use the port you specify in the Port textbox, and it must allow the incoming and outgoing connections. In our case, I am not changing the port.
The PostgreSQL server has been installed successfully. If you want to install additional components and drivers, you can choose to open the stack builder. In our case, I am not installing additional components. Click on Finish to complete the installation.
As you can see, the query execution status will be displayed in the messages pan. Now, let us insert some records in the tblemployee. Run the following query to insert data in tblemployee.
We can use the pSQL command-line utility to manage the PostgreSQL database. The SQL Shell is automatically installed with the PostgreSQL server. When we launch the SQL Shell, it prompts for following options.
In this article, we learned the step-by-step installation process of PostgreSQL on windows 10. I have also given a high-level overview of the pgAdmin4 tool and how we can connect to the PostgreSQL database using pgAdmin and SQL Shell (pSQL) utility.
Nisarg Upadhyay is a SQL Server Database Administrator and Microsoft certified professional who has more than 8 years of experience with SQL Server administration and 2 years with Oracle 10g database administration. He has expertise in database design, performance tuning, backup and recovery, HA and DR setup, database migrations and upgrades. He has completed the B.Tech from Ganpat University. He can be reached on nisargup...@outlook.com
d3342ee215