Re: Autocomcdpusbdriver

0 views

Skip to first unread message

Message has been deleted

Bernd Manison

unread,

Jul 15, 2024, 11:08:50 AM7/15/24

to verphesumda

Autocom CDP+ USB Driver Software

Autocom CDP+ is a user-friendly, fast and easy-to-use diagnostic tool for cars and trucks. It can read and erase fault codes, make adjustments and activations, turn off the service light and more, on both old and new vehicles. It has built-in interfaces for most communications available on the market that are used for OBD (On Board Diagnostic). It can connect to PC using either USB or Bluetooth.

autocomcdpusbdriver

Download File https://urlcod.com/2ySLip

To use Autocom CDP+ with a PC, you need to install the appropriate driver software. The driver software is included in the Autocom software package, which can be either CARS or GENERIC. The Autocom software package also contains the diagnostic software that allows you to perform various functions on your vehicle. The latest version of the Autocom software package is 2015.3.

The installation of the Autocom CDP+ USB driver software is simple and straightforward. You just need to follow the steps below:

Download the Autocom software package from the official website or from a trusted source.

Extract the files from the downloaded archive and run the setup.exe file.

Follow the instructions on the screen to install the Autocom software package.

Connect your Autocom CDP+ device to your PC using a USB cable.

Wait for the device to be detected by your PC and install the driver automatically. If the driver is not installed automatically, you can manually install it by following these steps:

Go to Device Manager on your PC and find the Autocom CDP+ device under Other devices or Unknown devices.

Right-click on the device and select Update driver software.

Select Browse my computer for driver software and then select Let me pick from a list of device drivers on my computer.

Select USB Serial Port from the list and click Next.

Select Autocom CDP+ USB Driver from the list of manufacturers and click Next.

Click Install to complete the installation of the driver.

Restart your PC and launch the Autocom diagnostic software.

Select your vehicle model and start diagnosing your vehicle.

You can watch a video tutorial on how to install the Autocom CDP+ USB driver software [here].

If you encounter any problems with the installation or operation of the Autocom CDP+ USB driver software, you can contact the Autocom support team or visit their website for more information.