Esr 3000

[Michelle Benitone]

Supportedby the advanced PicoScope software, these devices offer an ideal, cost-effective package for many applications, including embedded systems design, research, test, education, service, and repair.

Despite a compact size and low cost, there is no compromise on performance with bandwidths up to 200 MHz. This bandwidth is matched by a real-time sampling rate of up to 1 GS/s, allowing detailed display of high frequencies. For repetitive signals, the maximum effective sampling rate can be boosted to 10 GS/s by using Equivalent Time Sampling (ETS) mode.

Other oscilloscopes have high maximum sampling rates, but without deep memory they cannot sustain these rates on long timebases. The PicoScope 3000 Series offers memory depths up to 512 million samples, more than any other oscilloscope in this price range, which enables the PicoScope 3406D MSO to sample at 1 GS/s all the way down to 50 ms/ div (500 ms total capture time).

The digital inputs bring extra power to the serial decoding options. You can decode serial data on all analog and digital channels simultaneously, giving you up to 20 channels of data. You can for example decode multiple SPI, IC, CAN bus, LIN bus and FlexRay signals all at the same time!

Graph format shows the decoded data (in hex, binary, decimal, or ASCII) in a data bus timing format, beneath the waveform on a common time axis, with error frames marked in red. These frames can be zoomed in to investigate noise or signal integrity issues.

Table format shows a list of the decoded frames, including the data and all flags and identifiers. You can set up filtering conditions to display only the frames you are interested in or search for frames with specified properties. The statistics option reveals more detail about the physical layer such as frame times and voltage levels. PicoScope can also import a spreadsheet to decode the data into user-defined text strings.

All PicoScope 3000D units have a built-in function generator (sine, square, triangle, DC level, white noise, PRBS etc.) on the front panel. PicoScope 3000D MSO models have the connector on the rear panel.

As well as basic controls to set level, offset and frequency, more advanced controls allow you to sweep over a range of frequencies. Combined with the spectrum peak hold option this makes a powerful tool for testing amplifier and filter responses.

A 14 bit 80 MS/s arbitrary waveform generator (AWG) is also included. AWG waveforms can be created or edited using the built-in AWG editor, imported from oscilloscope traces, or loaded from a spreadsheet.

The spectrum view plots amplitude against frequency and is ideal for finding noise, crosstalk or distortion in signals. The spectrum analyzer in PicoScope is of the Fast Fourier Transform (FFT) type which, unlike a traditional swept spectrum analyzer, can display the spectrum of a single, non-repeating waveform.

You can display multiple spectrum views alongside oscilloscope views of the same data. A comprehensive set of automatic frequency-domain measurements can be added to the display, including THD, THD+N, SNR, SINAD and IMD. A mask limit test can be applied to a spectrum and you can even use the AWG and spectrum mode together to perform swept scalar network analysis.

We are proud of the dynamic performance of our products, and unlike most oscilloscope manufacturers publish our specifications in detail. The result is simple: when you probe a circuit, you can trust in the waveform you see on the screen.

The USB connection not only allows high-speed data acquisition and transfer, but also makes printing, copying, saving, and emailing your data from the field quick and easy. USB powering removes the need to carry around a bulky external power supply, making the kit even more portable for the engineer on the move.

PicoScope 3000 Series oscilloscopes feature a SuperSpeed USB 3.0 connection, making the already-optimized process of data transfer and waveform update rates even faster. Further benefits of a USB 3.0 connection include faster saving of waveforms and faster gap-free continuous streaming of up to 125 MS/s when using the SDK, while the scope is still backward-compatible with older USB systems.

Another clear advantage of the Maxim 3000 is the simplicity of design. It has 40% fewer parts than a typical restroom, which means there is less to break and fewer parts need to be stocked for inventory.

Other great features of the Maxim 3000 include deep, well defined corner and roof grips for easy maneuvering, two strong, vandal resistant door springs, a hanging hook and shelf for the convenience of users and a built-in mirror.

! WARNING: These products may contain chemicals known to the State of California to cause cancer and or/birth defects or other reproductive harm. for more information go to www.P65Warnings.ca.gov

Low profile hand wash unit with a fast foot pump fits seamlessly with the Maxim 3000 and its highly polished basin is quick to clean while maintaining its shine. Full forearm version has a basin so large that the user can easily wash their forearm without a mess.

Designed as an upgrade for the Maxim 3000 for fresh water flushing, this optional turbo base assembly features a 3 piece base which becomes the fresh water reservoir and an integral foot pump that activates flushing. Also available as a hand pump re-circulating flush system with a standard base.

Awlcraft 3000 is the next generation of high gloss premium acrylic urethane topcoats and utilizes the advanced AkzoNobel color platform (same as Awlgrip HDT) delivering enhanced color technology for truer, deeper, and more vibrant colors. Awlcraft 3000 maintains the trusted, proven, and versatile characteristics of Awlcraft 2000 that applicators and boat owners want, now with enhanced color.

COLPHENE 3000 is a self-adhered, SBS-modified bitumen membrane for use in approved waterproofing assemblies. COLPHENE 3000 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen. The topside is surfaced with a tri-laminated woven polyethylene facer and the underside is surfaced with a silicone release film that is removed during application.

Second Ward High School is a historic school in Charlotte, North Carolina that opened in 1923. The school was closed in 1969 and eventually demolished,with the exception of the gymnasium. When renovating the building into a recreation center, SOPREMA products were used to seal and protect the wall systems.

SOPRASMART laminated boards combine the roof membrane and coverboard into one installation layer, saving the installer time and labor. This patented product is the first and only in its category, bringing material savings to the equation as well.

This range of self-adhesive monomeric short-term promotional graphics calendered vinyls offers high opacity gloss and matt whites, and a choice of permanent or removable adhesives. High opacity films help you optimise your inventory - meaning you no longer have to stock both grey and transparent adhesives. Our Multi Purpose Inkjet 3000 High Opacity series (HOP) gives you all the operational flexibility you need.

The FLEXiO 3000 has the flexibility to spray indoors and outdoor with the power to spray unthinned paint and stains with full coverage. Cleaning is faster than a brush or paint roller with just a few removable parts that separate and rinse clean.

WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

I have Intel(R) HD Graphics 3000 and I want to get Intel(R) HD Graphics 4000 so I can play Black Ops 2. But I don't know how to install the 4000/2500. I'd appreciate the help. If you need my specs I'll post them right here. Also back in the summer I updated my graphics card from Intel Graphics Family to Intel(R) HD Graphics 3000 so I could run Amnesia: The Dark Descent.

When I did this it gave me a message that said something like "Windows does not support this as if this system does not support the driver then your computer could become unstable or stop working completely." Just thought you'd know

The "default" driver that came with your computer displays as an "HD Graphics" driver. Either when you or Windows Update applied a driver update to the system, it showed with it's proper name "HD Graphics 3000" which is what your i3-2310M should have.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

Covering a wide range of X-ray and Gamma radiation detection, our DMC 3000 Electronic Dosimeter represents over 25 years of real-world electronic dosimetry experience, continually refined through customer feedback.

The DMC 3000 provides all of this protection, for over 3,000 hours of continuous use, with a single AAA alkaline battery. Best of all, connected with plug and play add-on modules the DMC 3000 offers detection and radio transmission capabilities beyond traditional use.

The DMC 3000 dosimeter offers an enhanced communication protocol for additional features and includes a compatibility mode for previous Mirion Technologies products including calibration tools, access control, turnstiles and telemetry infrastructure.

Anyone have any problems with removing the battery module for an APC 3000RM series UPS. I removed the three screws, but the module can only be shimmied left/right and up/down a bit. Anyone experience this before? Cant imagine what's locking it up. I even removed the top case cover and I'm stuck.

I've dealt with this situation numerous times. The first thing to try is unplug the battery string completely and try using a large straight blade screwdriver to pry on the battery casing from the left and right sides - lever the screwdriver against the metal ups chassis casing to the left and right of the battery opening alternately to wiggle it out. If the screwdriver tip is sharp enough it will bite into the plastic of the battery and get extra grip. Don't worry if you crack the case of the battery it will not cause a problem (re leaks or shorts) as the batteries are toast anyway. If that doesn't work your only choice is to unplug the battery, power down the ups, remove it from the rack, let the UPS sit for a couple of days to drain any charge on the capacitors and then take the top off the UPS and get the batteries out one by one possibly removing some interior screws to losen the battery compartment walls. Some are riveted though!

3a8082e126