(...)
==> default: Configuring and enabling network interfaces...
The following SSH command responded with a non-zero exit status.
Vagrant assumes that this means the command failed!
# Down the interface before munging the config file. This might
# fail if the interface is not actually set up yet so ignore
# errors.
/sbin/ifdown 'eth1' || true
# Move new config into place
mv '/tmp/vagrant-network-entry-eth1-1496601950-0' '/etc/sysconfig/network-scripts/ifcfg-eth1'
# Bring the interface up
ARPCHECK=no /sbin/ifup 'eth1'
Stdout from the command:
Determining IP information for eth1... failed.
Stderr from the command:
usage: ifdown <configuration>
$
$ ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.121.107 netmask 255.255.255.0 broadcast 192.168.121.255
inet6 fe80::5054:ff:fec7:4c89 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:c7:4c:89 txqueuelen 1000 (Ethernet)
RX packets 514 bytes 64858 (63.3 KiB)
RX errors 0 dropped 2 overruns 0 frame 0
TX packets 366 bytes 51476 (50.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5054:ff:fe52:4b9d prefixlen 64 scopeid 0x20<link>
ether 52:54:00:52:4b:9d txqueuelen 1000 (Ethernet)
RX packets 54 bytes 6090 (5.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 15 bytes 3042 (2.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
$
config.vm.network :public_network, :bridge => 'wlp3s0', :dev => 'wlp3s0'
dhclient -4 -d eth1
no joy
more info here:
https://www.virtualbox.org/manual/ch06.html#network_bridged
if you do vagrant halt
turn the vm over virtualbox gui, and works, then it would be a vagrant issue, but seems more a wlan in general limitation
Alvaro
--
This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list.
GitHub Issues: https://github.com/mitchellh/vagrant/issues
IRC: #vagrant on Freenode
---
You received this message because you are subscribed to the Google Groups "Vagrant" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vagrant-up+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/vagrant-up/0423dcf7-df11-40f9-9806-39769b44b3bd%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.