Hi Dusty,
Sure...no problem.
1. Download and unzip the file attached to this thread: b232_CA_Fixes1.zip
- You will now have a file named b232_CA_Fixes1.dat, which contains two
updated versions of applications that have been exported to this file
2. Open an abt vast image
3. System Transcript Menu -> Tools -> Manage Applications
- Click on the resulting Application manger windows
4. Now you will import the applications from the patch file
Application Manager Menu -> Applications -> Import/Export -> Import Applications...
5. Erase 'localhost' from the resulting popup so the text field is blank and press 'Ok'
6. Select the patch file, which you unzipped, from the file dialog and press 'Open'
7. You will now see a selection required dialog, from which you will select all names and versions
from the left side and use the '>>' button to commit to the selection to the right side. At the
end of this, you should see the following in the Selected Version column
StsCodeAssistApp b232 + 50057 a
StsPowerTools b232 + 50058 a
Press 'Ok' when finished to import these fixes into your manager.
8. Now the code is in your manager repository, but not loaded into you live image...so we need to do that.
From the Application Manager, find and select StsPowerTools in the left pane.
Bring up a popup menu on it -> Load -> Another Edition...
Select 'StsPowerTools b232 + 50058 a' and press ok.
9. Now we load the other part of the patch
From the Application Manager, find and select StsCodeAssistApp in the left pane.
Bring up a popup menu on it -> Load -> Another Edition...
Select 'StsCodeAssistApp b232 + 50057 a' and press ok.
You should now have the patch not only imported into your manager, but also loaded into your running image.
In order to retain what you just did, you will probably want to save your image. Otherwise, you will need to
repeat steps 8 and 9 every time you start a new image.
Hope this helps...let me know if you need additional help
Regards
--Seth