Ultimate Samsung Flasher V1.5 Download __FULL__
Cheryl Frumes
Has anyone downloaded and flashed the new Stellarmate v1.5.1? I've tried 1.5.0 and 1.5.1 and the flashing has been unsuccessful. I used quick hash to confirm the integrity of the downloaded .xz file. I'm using a sandisk 64gb ultra sd card. I also tried a 32gb card from my dslr but same problems occur. I've used both Etcher and Win32 DiskImager. After flashing, only 252 mb is read on the card, the full 64gb cannot be accessed. I placed the flashed card into the raspberry pi (I have a pi 3 model B) and inserted the power cable. The red and green lights flash, the Wi-Fi is visible on my phone and laptop but I can't connect to it. I don't know what to try next. Has anyone had this problem or am I doing something wrong?
Full backup of all partitions on my PC
Backup of EEPROM (Through Evox Dash) - Send to PC
Backup of HDD EEPROM through Config Magic(different to the Evox Backup?) - Send to PC
Locked the HDD to the Xbox via ConfigMagic or Evox Dash etc
Softmodded with Slayers 3.3 - C drive no virtual
Removed Aladdin Advance mod chip - mine was soldered directly to MB so be careful when removing. I accidently broke off the C702 component and had to solder back on.
Soldered the correct TSOP write points for my Xbox revision - For Reference -tsop-flash-guide/
Checked BIOS with Bios checker on AutoInstallerDeluxe 4.5.3
TSOP confirmed writable. It will say 'TSOP?' up the top of the screen
Ran TruHexen 2020, flash bios the correct BIOS to TSOP depending on revision - v1.0 & v1.1 can support up to 1MB Bios, v1.2-v1.5 can support 256KB Bios - M8 Plus.67 is safest
Ran option 3.5.2 on TruHexen2020 - clean C after TSOP - To remove Softmod
Reformatted F and G drives with XBpartioner 1.3 - ensuring they show the full and correct amount in File Explorer/Your dash of choice
Delete contents of C and E partitions via FTP, and FTP over original C and E contents, reboot the Xbox
FTP all F and G data back to the Xbox.
Mobile App v1.55.1 is our first extended support release (ESR). We are very excited about the upcoming general availability of the v2.0 mobile app in December. We recognize that some customers may have a custom build of Mattermost mobile and need more time to test or implement their custom changes on mobile v2.0. The mobile ESR will be supported until July 2023. v1.55.1 will receive critical security fixes only and will be released as needed via unsigned builds to our mobile GitHub repository.
df19127ead