INTERLOCK Setup

[Zelec]

I'm trying to setup INTERLOCK on my USB Armory after I format the SD card with the INTERLOCK image and  connect to 10.0.0.1:4430 all I get is this http://i.imgur.com/qNRoZRZ.png What am I doing wrong?

[Andrea Barisani]

On 19 May 2016 8:22 p.m., "Zelec" <zele...@gmail.com> wrote:
>
>
> I'm trying to setup INTERLOCK on my USB Armory after I format the SD card with the INTERLOCK image and  connect to 10.0.0.1:4430 all I get is this http://i.imgur.com/qNRoZRZ.png What am I doing wrong?
>

Please try the full URL: https://10.0.0.1:4430

Cheers

> --
> You received this message because you are subscribed to the Google Groups "USB armory" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to usbarmory+...@googlegroups.com.
> To post to this group, send email to usba...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/usbarmory/499862ea-073f-46b3-a6a8-2692b8161d2e%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[Zelec]

I wasn't expecting the https part to be needed. Ah well it works now, Thanks.

[Samuel Chong]

Hi Andrea Barisani,

i just got my USB Armory MK II device and used "dd" to get the pre-built Interlock binaries into my microSD card. However I cannot access 10.0.0.1:4430 via my web browser and am wondering if you could point me in the right direction.

Some additional info:

1. My LED light blinks twice when i plug it in and then stops flashing (just stays on constantly) at the 3rd blink
2. I am able to ping 10.0.0.1 from my terminal
3. I am unable to ssh into 10.0.0.1 and it says i need a private key to access it