HOTLIST Immediate Req::Emulation, RTL || SoC Verification||Layout Design of High Speed Analog Layout
Mahesh Babu
1 Job Title: Emulation, RTL
Location: Austin, TX
Onsite Position
Description: The emulation system engineer will work on pre-silicon HW/FW end to end feature enablement, validation and debug for the next generation of AMD’s flagship server CPU products. The individual will develop and execute the pre-silicon strategy for server SoC emulation programs. The emulation system engineer will be responsible for driving Shift-Left process improvements working with HW System Engineering teams and other stakeholders (System Architects, IP, SOC, FW, SW).
• Responsible for the design and development of test environment components to support the pre-silicon validation of embedded firmware, BIOS code features, SW and directed tests.
• Responsible for writing directed tests to verify features in emulated hardware environment.
• Responsible for writing monitors and checkers to support end-to-end firmware/hardware validation.
• Work closely with design, architecture, BIOS, driver and validation teams to ensure readiness of silicon features for silicon bring-up.
• Responsible for writing and developing coverage goals and test plans.
• Responsible for running emulator workloads to test new features.
2 Job Title: SoC Verification
Location: Austin,TX
Onsite Position
A truly multidisciplinary function, working in close collaboration with the front-end designers and physical designers on the various SOC verification efforts, interacting with a wide variety of internal and external design verification development teams, Design Verification methodology, and Silicon IP and tool vendors. Work with architects, and the design and Design Verification team to define develop test plan and execute system verification plan from power management, system features e.g. power management, DFT Design Verification, interoperability, multi-engine Security, Coherency, etc.
MAIN REQUIREMENTS:
• Bachelor or Masters Degree in Electrical Engineering, Computer Engineering or Computer Science.
• Strong knowledge of OO programming languages such as C++
• Strong knowledge of digital logic and circuits
• Strong documentation and communication skills
• Good people skills. Organized and methodical with proven ability to plan and execute
• Ability to work well in a dynamic, fast-paced, pressure filled environment.
3 Job Title: Layout Design of High Speed Analog Layout
Location: USA, CA ( Milpitas)
Onsite
Job Description:
Layout Design of High Speed Analog Layout in finfet nodes of 7nm or below with strong understanding of finfet related DRC rules.
Below are the Urgent roles Smiths Medical Roles.
Role 1
Role – System Lead (7-10 Years)
Location – Minneapolis, Minnesota (Day 1 On Site )
Education - Bachelors or Masters in Electronics and communication /Electrical/ Electronics and instrumentation Engineering
1. Experience in the field of Electronic Board and System design.
2. Ability to design and develop Analog, Digital and Switching power supply circuits
3. Should have Good System Understanding and cross functional team interaction
4. Familiar in using Microcontrollers, DDR4, DDR3 SDRAM, SRAM, Flash Memory and EEPROM
5. Experience in high-speed designs, Ethernet, Battery, stepper motor, USB, uSD, Display, CAN, I2C, SPI, UART, RS232, RS422/485 communication interfaces
6. Experience in OPAMP, Comparators, ADC, DAC and Signal conditioning circuit and analog circuit simulation using TINA, WEBENCH, LTspice etc.,
7. Proficient in testing and debugging equipment’s like Oscilloscope, Function generator, Data Acquisition System, Digital multi-meters, I2C/SPI Analyzer etc.,
8. Familiar in preparation of Design document and Test procedure
9. Able to understand and debug Embedded C programs
10. Exposure to EMI/EMC, Surge, ESD, Environmental Design and Debugging
11. Ability to understand and debug problems across hardware boundaries
12. Disciplined team worker, ability to work independently
13. Ability to present ideas and to convince project team members
14. Be structured and self-organized
15. Positive can do attitude
16. Team player, team leader, drive for results
17. Quality mindset in design and documentation
18. Global mindset
19. Project status preparation and should have cross-functional team managing skills
Role 2
Role – System Engineer (10-14 Years)
Location – Minneapolis, Minnesota (Day 1 On Site )
Education - Bachelors or Masters in Electronics and communication /Electrical/ Electronics and instrumentation Engineering
1. Experience in the field of Electronic Board and System design.
2. Ability to design and develop Analog, Digital and Switching power supply circuits
3. Should have Good System Understanding and cross functional team interaction
4. Familiar in using Microcontrollers, DDR4, DDR3 SDRAM, SRAM, Flash Memory and EEPROM
5. Experience in high-speed designs, Ethernet, Battery, stepper motor, USB, uSD, Display, CAN, I2C, SPI, UART, RS232, RS422/485 communication interfaces
6. Experience in OPAMP, Comparators, ADC, DAC and Signal conditioning circuit and analog circuit simulation using TINA, WEBENCH, LTspice etc.,
7. Proficient in testing and debugging equipment’s like Oscilloscope, Function generator, Data Acquisition System, Digital multi-meters, I2C/SPI Analyzer etc.,
8. Familiar in preparation of Design document and Test procedure
9. Able to understand and debug Embedded C programs
10. Exposure to EMI/EMC, Surge, ESD, Environmental Design and Debugging
11. Ability to understand and debug problems across hardware boundaries
12. Disciplined team worker, ability to work independently
13. Ability to present ideas and to convince project team members
14. Be structured and self-organized
15. Positive can do attitude
16. Team player, team leader, drive for results
17. Quality mindset in design and documentation
18. Global mindset
19. Project status preparation and should have cross-functional team managing skills
Role 3
Role – SME Technical Specialist (10-14 Years)
Location – Minneapolis, Minnesota (Day 1 On Site )
Education - Bachelors or Masters in Electronics and communication /Electrical/ Electronics and instrumentation Engineering
1. Experience in the field of Electronic Board and System design.
2. Ability to design and develop Analog, Digital and Switching power supply circuits
3. Should have Good System Understanding and cross functional team interaction
4. Familiar in using Microcontrollers, DDR4, DDR3 SDRAM, SRAM, Flash Memory and EEPROM
5. Experience in high-speed designs, Ethernet, Battery, stepper motor, USB, uSD, Display, CAN, I2C, SPI, UART, RS232, RS422/485 communication interfaces
6. Experience in OPAMP, Comparators, ADC, DAC and Signal conditioning circuit and analog circuit simulation using TINA, WEBENCH, LTspice etc.,
7. Proficient in testing and debugging equipment’s like Oscilloscope, Function generator, Data Acquisition System, Digital multi-meters, I2C/SPI Analyzer etc.,
8. Familiar in preparation of Design document and Test procedure
9. Able to understand and debug Embedded C programs
10. Exposure to EMI/EMC, Surge, ESD, Environmental Design and Debugging
11. Ability to understand and debug problems across hardware boundaries
12. Disciplined team worker, ability to work independently
13. Knowledge of safety regulation standards e.g. IEC 60601, IEC 61010, UL, ANSI and ASTM
14. Ability to present ideas and to convince project team members
15. Be structured and self-organized
16. Positive can do attitude
17. Team player, team leader, drive for results
18. Quality mindset in design and documentation
19. Global mindset
20. Project status preparation and should have cross-functional team managing skills
21. Guide other team members on the project to ensure the content is accurate.
22. Resolve issues relevant to project deliverable(s) within their area of expertise.
23. Obtain or provide approval for changes to rules, processes and policies.
24. Be committed to the project and participate in the workshops.
25. Be proactive and engaged during the workshops.
Role 4:
Role – Electrical Lead (7-12 Years)
Location – Minneapolis, Minnesota (Day 1 On Site )
Education - Bachelors or Masters in Electronics and communication /Electrical/ Electronics and instrumentation Engineering
1. Experience in the field of Electronic Board and System design.
2. Experience in the field of Medical Product like infusion pump etc.
3. Ability to design and develop Analog, Digital and Switching power supply circuits
4. Familiar in using Microcontrollers, DDR4, DDR3 SDRAM, SRAM, Flash Memory and EEPROM
5. Experience in high-speed designs, Ethernet, Battery, stepper motor, USB, uSD, Display, CAN, I2C, SPI, UART, RS232, RS422/485 communication interfaces
6. Experience in OPAMP, Comparators, ADC, DAC and Signal conditioning circuit and analog circuit simulation using TINA, WEBENCH, LTspice etc.,
7. Knowledge of safety regulation standards e.g. IEC 60601-1-2, IEC 61010, UL, ANSI and ASTM
8. Medical device design experience
9. EMI / EMC testing
10. Perform HW testing and Verification
11. Familiar in preparation of Design document and Test procedure
12. Disciplined team worker, ability to work independently
13. Ability to understand and debug problems across hardware boundaries
14. Handling and guiding team members skills
15. Team player, team leader, drive for results
16. Quality mindset in design and documentation
17. Global mindset
