Mp C3504ex Driver

[Yaima President]

Ifyou're using the network connection to this scanner, then you don't need to install any Ricoh drivers. However, you might need to make sure your firewall is configured to allow VueScan to talk to your scanner.

If you use the Adobe PostScript(R) option, select the [Adobe PostScript] option from [PostScript] drop-down list of [Installable Options] tab. Visit FAQ section questions regarding PPDs for Ricoh, Lanier, Savin, NRG, Infotec, and Gestetner printers.Downloading the PPD directly is easier and faster since it has no dependency requirement and the file size is much smaller. Visit FAQ section for installing a PPD file. Download the driver package if you want to install all drivers (100+). Throughput 35.

Thanks to its built-in motion sensor, the RICOH MP C3004ex / MP C3504ex Multifunction Color Laser Printer can print compelling brochures, presentations, and more. This multifunction printer uses laser toner cartridges.

Download the Ricoh MP C3004ex Multifunction Color Laser Printer brochure, the latest cloud services, software drivers, and universal print drivers, for your MP C3004ex / MP C3504ex multifunction color laser printer.

This file describes how to set up your printer driver and contains the most up-to-date information that was available at the time of software release. For information on the Printer Driver settings and features, please check the Help file.The end of this readme contains some important notes about the use of this driver. Please read this carefully before installing the PCL printer driver.

Please conduct the following procedure to upgrade the printer driver.

This procedure requires administrator privileges.

Close all applications before starting the upgrade process.

Attention: When upgrading the printer driver, the same printer driver name must be used. (2)-1 Upgrading from Ver.1.0.0.0 - Ver.3.0.0.0 to a newer versionUninstall the printer driver with the same step as "(3) Uninstalling the printer driver ".Install new version of the printer driver with the same step as "(1) Installing the printer driver".(2)-2 Upgrading the printer driver from an older version (excluding Ver.1.0.0.0 - Ver.3.0.0.0) to a newer versionNote: If upgrading from an earlier version of the driver (Ver.3.1.0.0 - Ver.3.13.0.0), the upgrade procedure might result in changes to the values configured for some settings .Open the "Printers" folder (or "Printers and Faxes", "View Devices and Printers") from the "Start" menu or "Control Panel". Open the Properties of the printer to be upgraded. Select "Advanced" tab > "New Driver" button. Click "Next". Select "Have Disk..." then browse to the folder containing the extracted printer driver (you chose at step 2) INF file. Click "Open". Click "OK" and select the printer model. Click "Next". Once the installation is complete, click "Finish". Click "OK" to close the printer properties dialog box. Log the current user account off.(2)-3 Upgrading an x86 driver installed as an "Additional Driver" on an x64 system (and vice versa)To replace an x86 print driver on an x64 server (and vice versa), the following should be done:Open the Devices and Printers folder.Select any print queue and open the Print Server Properties.Select the Drivers tab.Click Add to install the new version of the x86 driver.After completing above operation, you can use printer driver of new version.

(3) Uninstalling the printer driver Note: This procedure requires administrator privileges (admin account or "Run as Administrator").(3)-1 Windows 7/8.1/10/Server 2008 R2/Server 2012/Server 2012 R2/Server 2016Close all applications.Open the "Printers" folder (or "Devices and Printers").Delete the printer icon corresponding to the driver that is to be uninstalled.Print server properties > "Driver" tab.Press the Change Driver Settings button.Select the driver to be uninstalled.Press the Remove key.Press "Remove driver and driver package".Log the current user account off or restart the PC.(3)-2 Windows Vista/Server 2008Close all applications.Open the "Printers" folder (or "Printers and Faxes").Delete the printer icon corresponding to the driver that is to be uninstalled.Right click in the "Printers" folder and select "Run as Administrator".Server Properties > Driver tab.Select the driver to be uninstalled.Press the Remove key.Press "Remove driver and driver package".Log the current user account off or restart the PC.Other important pointsThe settings which are introduced below are depending on the printer or the printer driver you use.[General Issue]To avoid problems in general, make sure that there is plenty of free disk space. With some applications (e.g. CorelDRAW, Visio), complicated images may take a long time to print when the Vector/Raster is "Vector". For faster printing, choose "Raster"(Vector/Raster). If Vector/Raster is "Raster" then parts of the job might be output as blank unprinted pages. If this occurs, try changing the resolution setting. Banner pages cannot be printed using the source tray that is selected to print "Chapter Page". Please use another source tray to print banner pages.On some applications, the backside of a duplex page is incremented by the device counter. These applications add a blank page to the end of odd-paged duplex jobs.

Workaround:

Specify the number of copies using the driver.In the environment to which the computer name is set by 16 bytes or more, the host name with banner page print is printed only up to 15 bytes. In the case of specific application, only one part will be printed even if the combination of post-processing features and number of copies by from the driver set of multiple.Post-processing capability refers to the following items.StaplePunchFoldSortPerfect Binding Layout and Booklet etc.

The example of specific application : Microsoft OfficeUse of Raster Mode with the Layout settings (= pages per sheet) may be printed roughly.

Workaround:

Use Vector Mode in the PCL driver.If the registry and configuration files that are generated during driver installation are edited or deleted, the behavior of the driver is not guaranteed. This driver does not support a function that TrueType fonts are replaced to printer resident fonts.If a different printer's name was selected when installing a driver, bidirectional communication will fail. Ensure that the correct printer's name is selected when installing the driver. [OS/Windows Related Issues]Jobs should not be submitted to the queue while the Windows Print Spooler is not running. In some cases, Separator pages might result in anomalies. Do not change the "Driver" setting in the Advanced tab. The "Web Image Monitor" button in the driver might not work in an IPv6 environment. We cannot guarantee if the behavior will be as expected when the Terminal Service Easy Print function is used in Windows Server 2008 environments.[Driver Setting Related Issues]Documents may not be stapled at the slant angle, even when you select "Top Left Slant" or "Top Right Slant". In such a case, the document will be stapled parallel to an edge of the paper. Printing a large document in booklet, duplex or reverse order printing produce a large temporary file. If you encounter an error when printing a large document in booklet, try again after increasing the free area in system installed drive (e.g. C:). Use of a different Paper Source for the cover setting might result in a paper mismatch error. This occurs if the cover is of a different paper size than the rest of the document. This only happens if the cover is not blank and if the source tray for the rest of the document is not "Auto Tray Select". As a workaround, change the print settings so that any one of the above conditions are not met. Note: "cover" = Front Cover, Back Cover or Designate/Chapter The use of Reverse Order is not supported with the Duplex, Front Cover, Back Cover, Chapter Pages, Slip Sheet functions.The number of copies specified using driver's may not work when printing from the following applications:

Adobe ReaderAdobe AcrobatAdobe IllustratorAdobe InDesign

Workaround:

Please specify the number of copies using the application's "Copies" setting.If the Staple setting is "2 at Center" or if the "Reverse Order"setting is On, the driver will add an extra page to the end of odd-paged duplex jobs. The added page will be incremented in the printer's counter. There is no way to prevent this.A paper mismatch error might occur when the measurement unit in the Custom Paper Size dialog is different from the Custom Size setting on the printer operation panel.[Printing Issues]Additional Page Count in Duplex Printing. An extra page is added to the end of odd-paged duplex jobs. The added page might be incremented in the printer's counter.Thin lines printed at high resolution (1200dpix1200dpi) might be difficult to see in the printed output. In such cases, use of a lower resolution is recommended.Some shaded images may not be printed correctly when Raster Mode is used.

Workaround:

Use Vector Mode in the PCL driver.Depending on the combination of text and font settings for watermark, text might not be printed.

In such case, a change of font is recommended.[B/W print with CMYK setting Issue]Black and White documents might be printed in full color (CMYK).To ensure that the job prints using pure Black (K), please change the color mode to "Black and White" or "Monochrome". When selecting "Color" from "Color/ Black and White" setting , black and white document may be printed as a color job, depending on application or data. If you want to print a document in black and white, select "Black and White" in "Color/ Black and White" setting. [Graphics/Images]Select [Quality] in [Print Priority] setting to clean up noise in printouts. When printing particular image data, it may appear noise on the printed document. In this case, select [Quality] in [Print Priority].[Fonts/Texts]Documents that contain fonts that are not installed on your computer might not print correctly. [Other issues]To avoid potential problems, "Reverse Order" setting shouldn't be used with Duplex, Front cover, Back cover, Designate/Chapter, or Slip Sheets.Upgrades with the New Driver button

If a driver is upgraded using the New Driver button, the setting "Automatically Update Printer Information" will be disabled.Note: If there are multiple logical printers using the upgraded driver, only the "Automatically Update Printer Information" setting of the logical printer used to access the New Driver button will be disabled. Bidirectional communication is not available over USB ports. Therefore device accessories cannot be automatically updated via a USB port.Print jobs that include an underscore in the billing code are canceled on models that do not support underscores in the billing code.Support modelsAficio SP 9100DN,MLP175n,P7675,SP 9100DN,SP 9100LP275

3a8082e126