[uofopensdk commit] r262 - in vendor/zlib: . current current/amiga current/as400 current/contrib current/contrib/ada ...

[codesite...@google.com]

Author: wangdong2
Date: Sun Jun 15 19:11:06 2008
New Revision: 262

Added:
vendor/zlib/
vendor/zlib/current/
vendor/zlib/current/ChangeLog
vendor/zlib/current/FAQ
vendor/zlib/current/INDEX
vendor/zlib/current/Makefile
vendor/zlib/current/Makefile.in
vendor/zlib/current/README
vendor/zlib/current/adler32.c
vendor/zlib/current/algorithm.txt
vendor/zlib/current/amiga/
vendor/zlib/current/amiga/Makefile.pup
vendor/zlib/current/amiga/Makefile.sas
vendor/zlib/current/as400/
vendor/zlib/current/as400/bndsrc
vendor/zlib/current/as400/compile.clp
vendor/zlib/current/as400/readme.txt
vendor/zlib/current/as400/zlib.inc
vendor/zlib/current/compress.c
vendor/zlib/current/configure
vendor/zlib/current/contrib/
vendor/zlib/current/contrib/README.contrib
vendor/zlib/current/contrib/ada/
vendor/zlib/current/contrib/ada/buffer_demo.adb
vendor/zlib/current/contrib/ada/mtest.adb
vendor/zlib/current/contrib/ada/read.adb
vendor/zlib/current/contrib/ada/readme.txt
vendor/zlib/current/contrib/ada/test.adb
vendor/zlib/current/contrib/ada/zlib-streams.adb
vendor/zlib/current/contrib/ada/zlib-streams.ads
vendor/zlib/current/contrib/ada/zlib-thin.adb
vendor/zlib/current/contrib/ada/zlib-thin.ads
vendor/zlib/current/contrib/ada/zlib.adb
vendor/zlib/current/contrib/ada/zlib.ads
vendor/zlib/current/contrib/ada/zlib.gpr
vendor/zlib/current/contrib/asm586/
vendor/zlib/current/contrib/asm586/README.586
vendor/zlib/current/contrib/asm586/match.S
vendor/zlib/current/contrib/asm686/
vendor/zlib/current/contrib/asm686/README.686
vendor/zlib/current/contrib/asm686/match.S
vendor/zlib/current/contrib/blast/
vendor/zlib/current/contrib/blast/Makefile
vendor/zlib/current/contrib/blast/README
vendor/zlib/current/contrib/blast/blast.c
vendor/zlib/current/contrib/blast/blast.h
vendor/zlib/current/contrib/blast/test.pk (contents, props changed)
vendor/zlib/current/contrib/blast/test.txt
vendor/zlib/current/contrib/delphi/
vendor/zlib/current/contrib/delphi/ZLib.pas
vendor/zlib/current/contrib/delphi/ZLibConst.pas
vendor/zlib/current/contrib/delphi/readme.txt
vendor/zlib/current/contrib/delphi/zlibd32.mak
vendor/zlib/current/contrib/dotzlib/
vendor/zlib/current/contrib/dotzlib/DotZLib/
vendor/zlib/current/contrib/dotzlib/DotZLib.build
vendor/zlib/current/contrib/dotzlib/DotZLib.chm (contents, props changed)
vendor/zlib/current/contrib/dotzlib/DotZLib.sln
vendor/zlib/current/contrib/dotzlib/DotZLib/AssemblyInfo.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/ChecksumImpl.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/CircularBuffer.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/CodecBase.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/Deflater.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/DotZLib.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/DotZLib.csproj
vendor/zlib/current/contrib/dotzlib/DotZLib/GZipStream.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/Inflater.cs
vendor/zlib/current/contrib/dotzlib/DotZLib/UnitTests.cs
vendor/zlib/current/contrib/dotzlib/LICENSE_1_0.txt
vendor/zlib/current/contrib/dotzlib/readme.txt
vendor/zlib/current/contrib/infback9/
vendor/zlib/current/contrib/infback9/README
vendor/zlib/current/contrib/infback9/infback9.c
vendor/zlib/current/contrib/infback9/infback9.h
vendor/zlib/current/contrib/infback9/inffix9.h
vendor/zlib/current/contrib/infback9/inflate9.h
vendor/zlib/current/contrib/infback9/inftree9.c
vendor/zlib/current/contrib/infback9/inftree9.h
vendor/zlib/current/contrib/inflate86/
vendor/zlib/current/contrib/inflate86/inffas86.c
vendor/zlib/current/contrib/inflate86/inffast.S
vendor/zlib/current/contrib/iostream/
vendor/zlib/current/contrib/iostream/test.cpp
vendor/zlib/current/contrib/iostream/zfstream.cpp
vendor/zlib/current/contrib/iostream/zfstream.h
vendor/zlib/current/contrib/iostream2/
vendor/zlib/current/contrib/iostream2/zstream.h
vendor/zlib/current/contrib/iostream2/zstream_test.cpp
vendor/zlib/current/contrib/iostream3/
vendor/zlib/current/contrib/iostream3/README
vendor/zlib/current/contrib/iostream3/TODO
vendor/zlib/current/contrib/iostream3/test.cc
vendor/zlib/current/contrib/iostream3/zfstream.cc
vendor/zlib/current/contrib/iostream3/zfstream.h
vendor/zlib/current/contrib/masm686/
vendor/zlib/current/contrib/masm686/match.asm
vendor/zlib/current/contrib/masmx64/
vendor/zlib/current/contrib/masmx64/bld_ml64.bat
vendor/zlib/current/contrib/masmx64/gvmat64.asm
vendor/zlib/current/contrib/masmx64/gvmat64.obj (contents, props changed)
vendor/zlib/current/contrib/masmx64/inffas8664.c
vendor/zlib/current/contrib/masmx64/inffasx64.asm
vendor/zlib/current/contrib/masmx64/inffasx64.obj (contents, props changed)
vendor/zlib/current/contrib/masmx64/readme.txt
vendor/zlib/current/contrib/masmx86/
vendor/zlib/current/contrib/masmx86/bld_ml32.bat
vendor/zlib/current/contrib/masmx86/gvmat32.asm
vendor/zlib/current/contrib/masmx86/gvmat32.obj (contents, props changed)
vendor/zlib/current/contrib/masmx86/gvmat32c.c
vendor/zlib/current/contrib/masmx86/inffas32.asm
vendor/zlib/current/contrib/masmx86/inffas32.obj (contents, props changed)
vendor/zlib/current/contrib/masmx86/mkasm.bat
vendor/zlib/current/contrib/masmx86/readme.txt
vendor/zlib/current/contrib/minizip/
vendor/zlib/current/contrib/minizip/ChangeLogUnzip
vendor/zlib/current/contrib/minizip/Makefile
vendor/zlib/current/contrib/minizip/crypt.h
vendor/zlib/current/contrib/minizip/ioapi.c
vendor/zlib/current/contrib/minizip/ioapi.h
vendor/zlib/current/contrib/minizip/iowin32.c
vendor/zlib/current/contrib/minizip/iowin32.h
vendor/zlib/current/contrib/minizip/miniunz.c
vendor/zlib/current/contrib/minizip/minizip.c
vendor/zlib/current/contrib/minizip/mztools.c
vendor/zlib/current/contrib/minizip/mztools.h
vendor/zlib/current/contrib/minizip/unzip.c
vendor/zlib/current/contrib/minizip/unzip.h
vendor/zlib/current/contrib/minizip/zip.c
vendor/zlib/current/contrib/minizip/zip.h
vendor/zlib/current/contrib/pascal/
vendor/zlib/current/contrib/pascal/example.pas
vendor/zlib/current/contrib/pascal/readme.txt
vendor/zlib/current/contrib/pascal/zlibd32.mak
vendor/zlib/current/contrib/pascal/zlibpas.pas
vendor/zlib/current/contrib/puff/
vendor/zlib/current/contrib/puff/Makefile
vendor/zlib/current/contrib/puff/README
vendor/zlib/current/contrib/puff/puff.c
vendor/zlib/current/contrib/puff/puff.h
vendor/zlib/current/contrib/puff/zeros.raw (contents, props changed)
vendor/zlib/current/contrib/testzlib/
vendor/zlib/current/contrib/testzlib/testzlib.c
vendor/zlib/current/contrib/testzlib/testzlib.txt
vendor/zlib/current/contrib/untgz/
vendor/zlib/current/contrib/untgz/Makefile
vendor/zlib/current/contrib/untgz/Makefile.msc
vendor/zlib/current/contrib/untgz/untgz.c
vendor/zlib/current/contrib/vstudio/
vendor/zlib/current/contrib/vstudio/readme.txt
vendor/zlib/current/contrib/vstudio/vc7/
vendor/zlib/current/contrib/vstudio/vc7/miniunz.vcproj
vendor/zlib/current/contrib/vstudio/vc7/minizip.vcproj
vendor/zlib/current/contrib/vstudio/vc7/testzlib.vcproj
vendor/zlib/current/contrib/vstudio/vc7/zlib.rc
vendor/zlib/current/contrib/vstudio/vc7/zlibstat.vcproj
vendor/zlib/current/contrib/vstudio/vc7/zlibvc.def
vendor/zlib/current/contrib/vstudio/vc7/zlibvc.sln
vendor/zlib/current/contrib/vstudio/vc7/zlibvc.vcproj
vendor/zlib/current/contrib/vstudio/vc8/
vendor/zlib/current/contrib/vstudio/vc8/miniunz.vcproj
vendor/zlib/current/contrib/vstudio/vc8/minizip.vcproj
vendor/zlib/current/contrib/vstudio/vc8/testzlib.vcproj
vendor/zlib/current/contrib/vstudio/vc8/testzlibdll.vcproj
vendor/zlib/current/contrib/vstudio/vc8/zlib.rc
vendor/zlib/current/contrib/vstudio/vc8/zlibstat.vcproj
vendor/zlib/current/contrib/vstudio/vc8/zlibvc.def
vendor/zlib/current/contrib/vstudio/vc8/zlibvc.sln
vendor/zlib/current/contrib/vstudio/vc8/zlibvc.vcproj
vendor/zlib/current/crc32.c
vendor/zlib/current/crc32.h
vendor/zlib/current/deflate.c
vendor/zlib/current/deflate.h
vendor/zlib/current/example.c
vendor/zlib/current/examples/
vendor/zlib/current/examples/README.examples
vendor/zlib/current/examples/fitblk.c
vendor/zlib/current/examples/gun.c
vendor/zlib/current/examples/gzappend.c
vendor/zlib/current/examples/gzjoin.c
vendor/zlib/current/examples/gzlog.c
vendor/zlib/current/examples/gzlog.h
vendor/zlib/current/examples/zlib_how.html
vendor/zlib/current/examples/zpipe.c
vendor/zlib/current/examples/zran.c
vendor/zlib/current/gzio.c
vendor/zlib/current/infback.c
vendor/zlib/current/inffast.c
vendor/zlib/current/inffast.h
vendor/zlib/current/inffixed.h
vendor/zlib/current/inflate.c
vendor/zlib/current/inflate.h
vendor/zlib/current/inftrees.c
vendor/zlib/current/inftrees.h
vendor/zlib/current/make_vms.com
vendor/zlib/current/minigzip.c
vendor/zlib/current/msdos/
vendor/zlib/current/msdos/Makefile.bor
vendor/zlib/current/msdos/Makefile.dj2
vendor/zlib/current/msdos/Makefile.emx
vendor/zlib/current/msdos/Makefile.msc
vendor/zlib/current/msdos/Makefile.tc
vendor/zlib/current/old/
vendor/zlib/current/old/Makefile.riscos
vendor/zlib/current/old/README
vendor/zlib/current/old/descrip.mms
vendor/zlib/current/old/os2/
vendor/zlib/current/old/os2/Makefile.os2
vendor/zlib/current/old/os2/zlib.def
vendor/zlib/current/old/visual-basic.txt
vendor/zlib/current/old/zlib.html
vendor/zlib/current/projects/
vendor/zlib/current/projects/README.projects
vendor/zlib/current/projects/visualc6/
vendor/zlib/current/projects/visualc6/README.txt
vendor/zlib/current/projects/visualc6/example.dsp
vendor/zlib/current/projects/visualc6/minigzip.dsp
vendor/zlib/current/projects/visualc6/zlib.dsp
vendor/zlib/current/projects/visualc6/zlib.dsw
vendor/zlib/current/qnx/
vendor/zlib/current/qnx/package.qpg
vendor/zlib/current/trees.c
vendor/zlib/current/trees.h
vendor/zlib/current/uncompr.c
vendor/zlib/current/win32/
vendor/zlib/current/win32/DLL_FAQ.txt
vendor/zlib/current/win32/Makefile.bor
vendor/zlib/current/win32/Makefile.emx
vendor/zlib/current/win32/Makefile.gcc
vendor/zlib/current/win32/Makefile.msc
vendor/zlib/current/win32/VisualC.txt
vendor/zlib/current/win32/zlib.def
vendor/zlib/current/win32/zlib1.rc
vendor/zlib/current/zconf.h
vendor/zlib/current/zconf.in.h
vendor/zlib/current/zlib.3
vendor/zlib/current/zlib.h
vendor/zlib/current/zutil.c
vendor/zlib/current/zutil.h

Log:
zlib-1.2.3 imported

Added: vendor/zlib/current/ChangeLog
==============================================================================
--- (empty file)
+++ vendor/zlib/current/ChangeLog Sun Jun 15 19:11:06 2008
@@ -0,0 +1,855 @@
+
+ ChangeLog file for zlib
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+ compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+ directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+ ENOUGH and MAXD -- this repairs a possible security vulnerability for
+ invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
+ discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+ avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+ fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+ and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+ contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+ dynamic blocks with only literals and no distance codes --
+ Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+ - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+ - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+ the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+ [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+ and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+ [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+ [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+ INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+ [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+ of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+ parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+ to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+ 16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+ Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+ zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+ library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+ special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+ - Report 0 for huffman and rle strategies and for level == 0 or 1
+ - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+ - When Z_RLE requested, restrict matches to distance one
+ - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+ - Refine detection of Turbo C need for dummy returns
+ - Refine ZLIB_DLL compilation
+ - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+ write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+ - About 20% faster
+ - Does not allocate 32K window unless and until needed
+ - Automatically detects and decompresses gzip streams
+ - Raw inflate no longer needs an extra dummy byte at end
+ - Added inflateBack functions using a callback interface--even faster
+ than inflate, useful for file utilities (gzip, zip)
+ - Added inflateCopy() function to record state for random access on
+ externally generated deflate streams (e.g. in gzip files)
+ - More readable code (I hope)
+- New and improved crc32()
+ - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+ and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+ return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+ is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+ - Document raw deflate and inflate
+ - Update RFCs URL
+ - Point out that zlib and gzip formats are different
+ - Note that Z_BUF_ERROR is not fatal
+ - Document string limit for gzprintf() and possible buffer overflow
+ - Note requirement on avail_out when flushing
+ - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+ This creates a security problem described in
+ http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+ less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+ of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+ occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+ (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean" (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+ . zutil.c, zutil.h: added "const" for zmem*
+ . Make_vms.com: fixed some typos
+ . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+ . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+ . msdos/Makefile.*: use model-dependent name for the built zlib library
+ . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+ new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+ See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+ completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+ (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+ compression ratio on some files. This also allows inlining _tr_tally for
+ matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+ on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+ the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+ them at run time (thanks to Ken Raeburn for this suggestion). To create
+ trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+ gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occurring only with compression level 0 (thanks to
+ Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+ (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+ (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+ inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+ contrib/asm386/ by Gilles Vollant <in...@winimage.com>
+ 386 asm code replacing longest_match().
+ contrib/iostream/ by Kevin Ruland <ke...@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+ contrib/iostream2/ by Tyge L�vset <Tyge....@cmr.no>
+ Another C++ I/O streams interface
+ contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <pa...@tid.es>
+ A very simple tar.gz file extractor using zlib
+ contrib/visual-basic.txt by Carlos Rios <c_r...@sonda.cl>
+ How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+ level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+ (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+ bit, so the decompressor could decompress all the correct data but went
+ on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+ small and medium models; this makes the library incompatible with previous
+ versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+ avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+ Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+ and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+ -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+ warning C4746: 'inflate_mask' : unsized array treated as '__far'
+ (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+ not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+ (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+ typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+ was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+ pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+ is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+ (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+ TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+ (one's complement) is now done inside crc32(). WARNING: this is
+ incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+ not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+ Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+ if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+ user-provided history buffer. This is supported only in deflateInit2
+ and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()

Added: vendor/zlib/current/FAQ
==============================================================================
--- (empty file)
+++ vendor/zlib/current/FAQ Sun Jun 15 19:11:06 2008
@@ -0,0 +1,339 @@
+
+ Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://www.zlib.org which may have more recent information.
+The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+ Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+ The zlib sources can be compiled without change to produce a DLL.
+ See the file win32/DLL_FAQ.txt in the zlib distribution.
+ Pointers to the precompiled DLL are found in the zlib web site at
+ http://www.zlib.org.
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+ See
+ * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+ * contrib/visual-basic.txt in the zlib distribution
+ * win32/DLL_FAQ.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR.
+
+ Make sure that before the call of compress, the length of the compressed
+ buffer is equal to the total size of the compressed buffer and not
+ zero. For Visual Basic, check that this parameter is passed by reference
+ ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
+
+ Before making the call, make sure that avail_in and avail_out are not
+ zero. When setting the parameter flush equal to Z_FINISH, also make sure
+ that avail_out is big enough to allow processing all pending input.
+ Note that a Z_BUF_ERROR is not fatal--another call to deflate() or
+ inflate() can be made with more input or output space. A Z_BUF_ERROR
+ may in fact be unavoidable depending on how the functions are used, since
+ it is not possible to tell whether or not there is more output pending
+ when strm.avail_out returns with zero.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+ It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+ web page zlib.html. Volunteers to transform this to Unix-style man pages,
+ please contact us (zl...@gzip.org). Examples of zlib usage are in the files
+ example.c and minigzip.c.
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+ Because we would like to keep zlib as a very small and simple
+ package. zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+ Most of the time, such problems are due to an incorrect usage of
+ zlib. Please try to reproduce the problem with a small program and send
+ the corresponding source to us at zl...@gzip.org . Do not send
+ multi-megabyte data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+ If "make test" produces something like
+
+ example.o(.text+0x154): undefined reference to `gzputc'
+
+ check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+ /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+ See the contrib/delphi directory in the zlib distribution.
+
+11. Can zlib handle .zip archives?
+
+ Not by itself, no. See the directory contrib/minizip in the zlib
+ distribution.
+
+12. Can zlib handle .Z files?
+
+ No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+ the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+ make clean
+ ./configure -s
+ make
+
+14. How do I install a shared zlib library on Unix?
+
+ After the above, then:
+
+ make install
+
+ However, many flavors of Unix come with a shared zlib already installed.
+ Before going to the trouble of compiling a shared version of zlib and
+ trying to install it, you may want to check if it's already there! If you
+ can #include <zlib.h>, it's there. The -lz option will probably link to it.
+
+15. I have a question about OttoPDF.
+
+ We are not the authors of OttoPDF. The real author is on the OttoPDF web
+ site: Joel Hainley, jhai...@myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+ Yes. See http://www.fastio.com/ (ClibPDF), or http://www.pdflib.com/ .
+ To modify PDF forms, see http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+ After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+ generates an error such as:
+
+ ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+ symbol __register_frame_info: referenced symbol not found
+
+ The symbol __register_frame_info is not part of zlib, it is generated by
+ the C compiler (cc or gcc). You must recompile applications using zlib
+ which have this problem. This problem is specific to Solaris. See
+ http://www.sunfreeware.com for Solaris versions of zlib and applications
+ using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
+
+ The compress and deflate functions produce data in the zlib format, which
+ is different and incompatible with the gzip format. The gz* functions in
+ zlib on the other hand use the gzip format. Both the zlib and gzip
+ formats use the same compressed data format internally, but have different
+ headers and trailers around the compressed data.
+
+19. Ok, so why are there two different formats?
+
+ The gzip format was designed to retain the directory information about
+ a single file, such as the name and last modification date. The zlib
+ format on the other hand was designed for in-memory and communication
+ channel applications, and has a much more compact header and trailer and
+ uses a faster integrity check than gzip.
+
+20. Well that's nice, but how do I make a gzip file in memory?
+
+ You can request that deflate write the gzip format instead of the zlib
+ format using deflateInit2(). You can also request that inflate decode
+ the gzip format using inflateInit2(). Read zlib.h for more details.
+
+21. Is zlib thread-safe?
+
+ Yes. However any library routines that zlib uses and any application-
+ provided memory allocation routines must also be thread-safe. zlib's gz*
+ functions use stdio library routines, and most of zlib's functions use the
+ library memory allocation routines by default. zlib's Init functions allow
+ for the application to provide custom memory allocation routines.
+
+ Of course, you should only operate on any given zlib or gzip stream from a
+ single thread at a time.
+
+22. Can I use zlib in my commercial application?
+
+ Yes. Please read the license in zlib.h.
+
+23. Is zlib under the GNU license?
+
+ No. Please read the license in zlib.h.
+
+24. The license says that altered source versions must be "plainly marked". So
+ what exactly do I need to do to meet that requirement?
+
+ You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+ particular, the final version number needs to be changed to "f", and an
+ identification string should be appended to ZLIB_VERSION. Version numbers
+ x.x.x.f are reserved for modifications to zlib by others than the zlib
+ maintainers. For example, if the version of the base zlib you are altering
+ is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
+ ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+ update the version strings in deflate.c and inftrees.c.
+
+ For altered source distributions, you should also note the origin and
+ nature of the changes in zlib.h, as well as in ChangeLog and README, along
+ with the dates of the alterations. The origin should include at least your
+ name (or your company's name), and an email address to contact for help or
+ issues with the library.
+
+ Note that distributing a compiled zlib library along with zlib.h and
+ zconf.h is also a source distribution, and so you should change
+ ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
+ in zlib.h as you would for a full source distribution.
+
+25. Will zlib work on a big-endian or little-endian architecture, and can I
+ exchange compressed data between them?
+
+ Yes and yes.
+
+26. Will zlib work on a 64-bit machine?
+
+ It should. It has been tested on 64-bit machines, and has no dependence
+ on any data types being limited to 32-bits in length. If you have any
+ difficulties, please provide a complete problem report to zl...@gzip.org
+
+27. Will zlib decompress data from the PKWare Data Compression Library?
+
+ No. The PKWare DCL uses a completely different compressed data format
+ than does PKZIP and zlib. However, you can look in zlib's contrib/blast
+ directory for a possible solution to your problem.
+
+28. Can I access data randomly in a compressed stream?
+
+ No, not without some preparation. If when compressing you periodically
+ use Z_FULL_FLUSH, carefully write all the pending data at those points,
+ and keep an index of those locations, then you can start decompression
+ at those points. You have to be careful to not use Z_FULL_FLUSH too
+ often, since it can significantly degrade compression.
+
+29. Does zlib work on MVS, OS/390, CICS, etc.?
+
+ We don't know for sure. We have heard occasional reports of success on
+ these systems. If you do use it on one of these, please provide us with
+ a report, instructions, and patches that we can reference when we get
+ these questions. Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at
+ to understand the deflate format?
+
+ First off, you should read RFC 1951. Second, yes. Look in zlib's
+ contrib/puff directory.
+
+31. Does zlib infringe on any patents?
+
+ As far as we know, no. In fact, that was originally the whole point behind
+ zlib. Look here for some more information:
+
+ http://www.gzip.org/#faq11
+
+32. Can zlib work with greater than 4 GB of data?
+
+ Yes. inflate() and deflate() will process any amount of data correctly.
+ Each call of inflate() or deflate() is limited to input and output chunks
+ of the maximum value that can be stored in the compiler's "unsigned int"
+ type, but there is no limit to the number of chunks. Note however that the
+ strm.total_in and strm_total_out counters may be limited to 4 GB. These
+ counters are provided as a convenience and are not used internally by
+ inflate() or deflate(). The application can easily set up its own counters
+ updated after each call of inflate() or deflate() to count beyond 4 GB.
+ compress() and uncompress() may be limited to 4 GB, since they operate in a
+ single call. gzseek() and gztell() may be limited to 4 GB depending on how
+ zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+
+ The word "may" appears several times above since there is a 4 GB limit
+ only if the compiler's "long" type is 32 bits. If the compiler's "long"
+ type is 64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+ The only one that we are aware of is potentially in gzprintf(). If zlib
+ is compiled to use sprintf() or vsprintf(), then there is no protection
+ against a buffer overflow of a 4K string space, other than the caller of
+ gzprintf() assuring that the output will not exceed 4K. On the other
+ hand, if zlib is compiled to use snprintf() or vsnprintf(), which should
+ normally be the case, then there is no vulnerability. The ./configure
+ script will display warnings if an insecure variation of sprintf() will
+ be used by gzprintf(). Also the zlibCompileFlags() function will return
+ information on what variant of sprintf() is used by gzprintf().
+
+ If you don't have snprintf() or vsnprintf() and would like one, you can
+ find a portable implementation here:
+
+ http://www.ijs.si/software/snprintf/
+
+ Note that you should be using the most recent version of zlib. Versions
+ 1.1.3 and before were subject to a double-free vulnerability.
+
+34. Is there a Java version of zlib?
+
+ Probably what you want is to use zlib in Java. zlib is already included
+ as part of the Java SDK in the java.util.zip package. If you really want
+ a version of zlib written in the Java language, look on the zlib home
+ page for links: http://www.zlib.org/
+
+35. I get this or that compiler or source-code scanner warning when I crank it
+ up to maximally-pedantic. Can't you guys write proper code?
+
+ Many years ago, we gave up attempting to avoid warnings on every compiler
+ in the universe. It just got to be a waste of time, and some compilers
+ were downright silly. So now, we simply make sure that the code always
+ works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+ performing a conditional jump that depends on an uninitialized value.
+ Isn't that a bug?
+
+ No. That is intentional for performance reasons, and the output of
+ deflate is not affected. This only started showing up recently since
+ zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+ versions used calloc(), which zeros out the allocated memory.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
+ data format?
+
+ Probably not. Look in the comp.compression FAQ for pointers to various
+ formats and associated software.
+
+38. How can I encrypt/decrypt zip files with zlib?
+
+ zlib doesn't support encryption. The original PKZIP encryption is very weak
+ and can be broken with freely available programs. To get strong encryption,
+ use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
+ For PKZIP compatible "encryption", look at http://www.info-zip.org/
+
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+
+ "gzip" is the gzip format, and "deflate" is the zlib format. They should
+ probably have called the second one "zlib" instead to avoid confusion
+ with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+ correctly points to the zlib specification in RFC 1950 for the "deflate"
+ transfer encoding, there have been reports of servers and browsers that
+ incorrectly produce or expect raw deflate data per the deflate
+ specficiation in RFC 1951, most notably Microsoft. So even though the
+ "deflate" transfer encoding using the zlib format would be the more
+ efficient approach (and in fact exactly what the zlib format was designed
+ for), using the "gzip" transfer encoding is probably more reliable due to
+ an unfortunate choice of name on the part of the HTTP 1.1 authors.
+
+ Bottom line: use the gzip format for HTTP 1.1 encoding.
+
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+ No. PKWare has apparently decided to keep that format proprietary, since
+ they have not documented it as they have previous compression formats.
+ In any case, the compression improvements are so modest compared to other
+ more modern approaches, that it's not worth the effort to implement.
+
+41. Can you please sign these lengthy legal documents and fax them back to us
+ so that we can use your software in our product?
+
+ No. Go away. Shoo.

Added: vendor/zlib/current/INDEX
==============================================================================
--- (empty file)
+++ vendor/zlib/current/INDEX Sun Jun 15 19:11:06 2008
@@ -0,0 +1,51 @@
+ChangeLog history of changes
+FAQ Frequently Asked Questions about zlib
+INDEX this file
+Makefile makefile for Unix (generated by configure)
+Makefile.in makefile for Unix (template for configure)
+README guess what
+algorithm.txt description of the (de)compression algorithm
+configure configure script for Unix
+zconf.in.h template for zconf.h (used by configure)
+
+amiga/ makefiles for Amiga SAS C
+as400/ makefiles for IBM AS/400
+msdos/ makefiles for MSDOS
+old/ makefiles for various architectures and zlib documentation
+ files that have not yet been updated for zlib 1.2.x
+projects/ projects for various Integrated Development Environments
+qnx/ makefiles for QNX
+win32/ makefiles for Windows
+
+ zlib public header files (must be kept):
+zconf.h
+zlib.h
+
+ private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+crc32.h
+deflate.c
+deflate.h
+gzio.c
+infback.c
+inffast.c
+inffast.h
+inffixed.h
+inflate.c
+inflate.h
+inftrees.c
+inftrees.h
+trees.c
+trees.h
+uncompr.c
+zutil.c
+zutil.h
+
+ source files for sample programs:
+example.c
+minigzip.c
+
+ unsupported contribution by third parties
+See contrib/README.contrib

Added: vendor/zlib/current/Makefile
==============================================================================
--- (empty file)
+++ vendor/zlib/current/Makefile Sun Jun 15 19:11:06 2008
@@ -0,0 +1,154 @@
+# Makefile for zlib
+# Copyright (C) 1995-2005 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To use the asm code, type:
+# cp contrib/asm?86/match.S ./match.S
+# make LOC=-DASMV OBJA=match.o
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+# make install
+# To install in $HOME instead of /usr/local, use:
+# make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=libz.a
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+LIBS=libz.a
+SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.3
+SHAREDLIBM=libz.so.1
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+EXE=
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example$(EXE) minigzip$(EXE)
+
+check: test
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+
+$(SHAREDLIBV): $(OBJS)
+ $(LDSHARED) -o $@ $(OBJS)
+ rm -f $(SHAREDLIB) $(SHAREDLIBM)
+ ln -s $@ $(SHAREDLIB)
+ ln -s $@ $(SHAREDLIBM)
+
+example$(EXE): example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip$(EXE): minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+ -@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
+ -@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi
+ -@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi
+ -@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi
+ cp zlib.h zconf.h $(includedir)
+ chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+ cp $(LIBS) $(libdir)
+ cd $(libdir); chmod 755 $(LIBS)
+ -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+ cd $(libdir); if test -f $(SHAREDLIBV); then \
+ rm -f $(SHAREDLIB) $(SHAREDLIBM); \
+ ln -s $(SHAREDLIBV) $(SHAREDLIB); \
+ ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+ (ldconfig || true) >/dev/null 2>&1; \
+ fi
+ cp zlib.3 $(man3dir)
+ chmod 644 $(man3dir)/zlib.3
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+ cd $(includedir); \
+ cd $(libdir); rm -f libz.a; \
+ if test -f $(SHAREDLIBV); then \
+ rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
+ fi
+ cd $(man3dir); rm -f zlib.3
+
+mostlyclean: clean
+clean:
+ rm -f *.o *~ example$(EXE) minigzip$(EXE) \
+ libz.* foo.gz so_locations \
+ _match.s maketree contrib/infback9/*.o
+
+maintainer-clean: distclean
+distclean: clean
+ cp -p Makefile.in Makefile
+ cp -p zconf.in.h zconf.h
+ rm -f .DS_Store
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

Added: vendor/zlib/current/Makefile.in
==============================================================================
--- (empty file)
+++ vendor/zlib/current/Makefile.in Sun Jun 15 19:11:06 2008
@@ -0,0 +1,154 @@
+# Makefile for zlib
+# Copyright (C) 1995-2005 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To use the asm code, type:
+# cp contrib/asm?86/match.S ./match.S
+# make LOC=-DASMV OBJA=match.o
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+# make install
+# To install in $HOME instead of /usr/local, use:
+# make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=libz.a
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+LIBS=libz.a
+SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.3
+SHAREDLIBM=libz.so.1
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+EXE=
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example$(EXE) minigzip$(EXE)
+
+check: test
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+
+$(SHAREDLIBV): $(OBJS)
+ $(LDSHARED) -o $@ $(OBJS)
+ rm -f $(SHAREDLIB) $(SHAREDLIBM)
+ ln -s $@ $(SHAREDLIB)
+ ln -s $@ $(SHAREDLIBM)
+
+example$(EXE): example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip$(EXE): minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+ -@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
+ -@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi
+ -@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi
+ -@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi
+ cp zlib.h zconf.h $(includedir)
+ chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+ cp $(LIBS) $(libdir)
+ cd $(libdir); chmod 755 $(LIBS)
+ -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+ cd $(libdir); if test -f $(SHAREDLIBV); then \
+ rm -f $(SHAREDLIB) $(SHAREDLIBM); \
+ ln -s $(SHAREDLIBV) $(SHAREDLIB); \
+ ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+ (ldconfig || true) >/dev/null 2>&1; \
+ fi
+ cp zlib.3 $(man3dir)
+ chmod 644 $(man3dir)/zlib.3
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+ cd $(includedir); \
+ cd $(libdir); rm -f libz.a; \
+ if test -f $(SHAREDLIBV); then \
+ rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
+ fi
+ cd $(man3dir); rm -f zlib.3
+
+mostlyclean: clean
+clean:
+ rm -f *.o *~ example$(EXE) minigzip$(EXE) \
+ libz.* foo.gz so_locations \
+ _match.s maketree contrib/infback9/*.o
+
+maintainer-clean: distclean
+distclean: clean
+ cp -p Makefile.in Makefile
+ cp -p zconf.in.h zconf.h
+ rm -f .DS_Store
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

Added: vendor/zlib/current/README
==============================================================================
--- (empty file)
+++ vendor/zlib/current/README Sun Jun 15 19:11:06 2008
@@ -0,0 +1,125 @@
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.3 is a general purpose data compression library. All the code is
+thread safe. The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format). These documents are also available in other
+formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zl...@gzip.org). A usage example
+of the library is given in the file example.c which also tests that the library
+is working correctly. Another example is given in the file minigzip.c. The
+compression library itself is composed of all source files except example.c and
+minigzip.c.
+
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile. In short "make test; make install" should work for most
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
+
+Questions about zlib should be sent to <zl...@gzip.org>, or to Gilles Vollant
+<in...@winimage.com> for the Windows DLL version. The zlib home page is
+http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
+please check this site to verify that you have the latest version of zlib;
+otherwise get the latest version and check whether the problem still exists or
+not.
+
+PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
+for help.
+
+Mark Nelson <ma...@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of Dr. Dobb's Journal; a copy of the article is available in
+http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+
+The changes made in version 1.2.3 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit
+http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
+See the zlib home page http://www.zlib.org for details.
+
+A Perl interface to zlib written by Paul Marquess <pm...@cpan.org> is in the
+CPAN (Comprehensive Perl Archive Network) sites
+http://www.cpan.org/modules/by-module/Compress/
+
+A Python interface to zlib written by A.M. Kuchling <a...@amk.ca> is
+available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.ku...@westend.com> is
+availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <in...@winimage.com>, is available in the
+contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+ -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+ compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+ when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+ necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+ other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+- When building a shared, i.e. dynamic library on Mac OS X, the library must be
+ installed before testing (do "make install" before "make test"), since the
+ library location is specified in the library.
+
+
+Acknowledgments:
+
+ The deflate format used by zlib was defined by Phil Katz. The deflate
+ and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+ people who reported problems and suggested various improvements in zlib;
+ they are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2004 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jl...@gzip.org mad...@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not*
+receiving lengthy legal documents to sign. The sources are provided
+for free but without warranty of any kind. The library has been
+entirely written by Jean-loup Gailly and Mark Adler; it does not
+include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include
+in the file ChangeLog history information documenting your changes. Please
+read the FAQ for more information on the distribution of modified source
+versions.

Added: vendor/zlib/current/adler32.c
==============================================================================
--- (empty file)
+++ vendor/zlib/current/adler32.c Sun Jun 15 19:11:06 2008
@@ -0,0 +1,149 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+#define BASE 65521UL /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware */
+#ifdef NO_DIVIDE
+# define MOD(a) \
+ do { \
+ if (a >= (BASE << 16)) a -= (BASE << 16); \
+ if (a >= (BASE << 15)) a -= (BASE << 15); \
+ if (a >= (BASE << 14)) a -= (BASE << 14); \
+ if (a >= (BASE << 13)) a -= (BASE << 13); \
+ if (a >= (BASE << 12)) a -= (BASE << 12); \
+ if (a >= (BASE << 11)) a -= (BASE << 11); \
+ if (a >= (BASE << 10)) a -= (BASE << 10); \
+ if (a >= (BASE << 9)) a -= (BASE << 9); \
+ if (a >= (BASE << 8)) a -= (BASE << 8); \
+ if (a >= (BASE << 7)) a -= (BASE << 7); \
+ if (a >= (BASE << 6)) a -= (BASE << 6); \
+ if (a >= (BASE << 5)) a -= (BASE << 5); \
+ if (a >= (BASE << 4)) a -= (BASE << 4); \
+ if (a >= (BASE << 3)) a -= (BASE << 3); \
+ if (a >= (BASE << 2)) a -= (BASE << 2); \
+ if (a >= (BASE << 1)) a -= (BASE << 1); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+# define MOD4(a) \
+ do { \
+ if (a >= (BASE << 4)) a -= (BASE << 4); \
+ if (a >= (BASE << 3)) a -= (BASE << 3); \
+ if (a >= (BASE << 2)) a -= (BASE << 2); \
+ if (a >= (BASE << 1)) a -= (BASE << 1); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+#else
+# define MOD(a) a %= BASE
+# define MOD4(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ uInt len;
+{
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD4(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
+ DO16(buf);
+ buf += 16;
+ }
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ rem = (unsigned)(len2 % BASE);
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 > BASE) sum1 -= BASE;
+ if (sum1 > BASE) sum1 -= BASE;
+ if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+ if (sum2 > BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
+}

Added: vendor/zlib/current/algorithm.txt
==============================================================================
--- (empty file)
+++ vendor/zlib/current/algorithm.txt Sun Jun 15 19:11:06 2008
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast. The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits. Also the distance trees have 30 possible
+values, and the size of the first table is six bits. Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend two much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jl...@gzip.org mad...@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://www.ietf.org/rfc/rfc1951.txt

Added: vendor/zlib/current/amiga/Makefile.pup
==============================================================================
--- (empty file)
+++ vendor/zlib/current/amiga/Makefile.pup Sun Jun 15 19:11:06 2008
@@ -0,0 +1,66 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+LIBNAME = libzip.a
+
+CC = scppc
+CFLAGS = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+ OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER
+AR = ppc-amigaos-ar cr
+RANLIB = ppc-amigaos-ranlib
+LD = ppc-amigaos-ld -r
+LDFLAGS = -o
+LDLIBS = LIB:scppc.a LIB:end.o
+RM = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+check: test
+test: all
+ example
+ echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+ $(AR) $@ $(OBJS)
+ -$(RANLIB) $@
+
+example: example.o $(LIBNAME)
+ $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+minigzip: minigzip.o $(LIBNAME)
+ $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+mostlyclean: clean
+clean:
+ $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+ zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+ descrip.mms *.[ch]
+
+tgz:
+ cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+ zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

Added: vendor/zlib/current/amiga/Makefile.sas
==============================================================================
--- (empty file)
+++ vendor/zlib/current/amiga/Makefile.sas Sun Jun 15 19:11:06 2008
@@ -0,0 +1,65 @@
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ah...@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+ NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
+ DEF=POSTINC
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+check: test
+test: all
+ example
+ echo hello world | minigzip | minigzip -d
+
+install: z.lib
+ copy clone zlib.h zconf.h INCLUDE:
+ copy clone z.lib LIB:
+
+z.lib: $(OBJS)
+ oml z.lib r $(OBJS)
+
+example: example.o z.lib
+ $(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+ $(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+mostlyclean: clean
+clean:
+ -delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Makefile.sas
+ copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

Added: vendor/zlib/current/as400/bndsrc
==============================================================================
--- (empty file)
+++ vendor/zlib/current/as400/bndsrc Sun Jun 15 19:11:06 2008
@@ -0,0 +1,132 @@
+STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.1.3 entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE ADLER32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("adler32")
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compress")
+ EXPORT SYMBOL("compress2")
+
+/********************************************************************/
+/* *MODULE CRC32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("crc32")
+ EXPORT SYMBOL("get_crc_table")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflate")
+ EXPORT SYMBOL("deflateEnd")
+ EXPORT SYMBOL("deflateSetDictionary")
+ EXPORT SYMBOL("deflateCopy")
+ EXPORT SYMBOL("deflateReset")
+ EXPORT SYMBOL("deflateParams")
+ EXPORT SYMBOL("deflatePrime")
+ EXPORT SYMBOL("deflateInit_")
+ EXPORT SYMBOL("deflateInit2_")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzopen")
+ EXPORT SYMBOL("gzdopen")
+ EXPORT SYMBOL("gzsetparams")
+ EXPORT SYMBOL("gzread")
+ EXPORT SYMBOL("gzwrite")
+ EXPORT SYMBOL("gzprintf")
+ EXPORT SYMBOL("gzputs")
+ EXPORT SYMBOL("gzgets")
+ EXPORT SYMBOL("gzputc")
+ EXPORT SYMBOL("gzgetc")
+ EXPORT SYMBOL("gzflush")
+ EXPORT SYMBOL("gzseek")
+ EXPORT SYMBOL("gzrewind")
+ EXPORT SYMBOL("gztell")
+ EXPORT SYMBOL("gzeof")
+ EXPORT SYMBOL("gzclose")
+ EXPORT SYMBOL("gzerror")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflate")
+ EXPORT SYMBOL("inflateEnd")
+ EXPORT SYMBOL("inflateSetDictionary")
+ EXPORT SYMBOL("inflateSync")
+ EXPORT SYMBOL("inflateReset")
+ EXPORT SYMBOL("inflateInit_")
+ EXPORT SYMBOL("inflateInit2_")
+ EXPORT SYMBOL("inflateSyncPoint")
+
+/********************************************************************/
+/* *MODULE UNCOMPR ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("uncompress")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibVersion")
+ EXPORT SYMBOL("zError")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.1 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compressBound")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflateBound")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzungetc")
+ EXPORT SYMBOL("gzclearerr")
+
+/********************************************************************/
+/* *MODULE INFBACK ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateBack")
+ EXPORT SYMBOL("inflateBackEnd")
+ EXPORT SYMBOL("inflateBackInit_")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateCopy")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibCompileFlags")
+
+ENDPGMEXP

Added: vendor/zlib/current/as400/compile.clp
==============================================================================
--- (empty file)
+++ vendor/zlib/current/as400/compile.clp Sun Jun 15 19:11:06 2008
@@ -0,0 +1,123 @@
+/******************************************************************************/
+/* */
+/* ZLIB */
+/* */
+/* Compile sources into modules and link them into a service program. */
+/* */
+/******************************************************************************/
+
+ PGM
+
+/* Configuration adjustable parameters. */
+
+ DCL VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Source library. */
+ DCL VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('SOURCES') /* Source member file. */
+ DCL VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('TOOLS') /* Control member file. */
+
+ DCL VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Module library. */
+
+ DCL VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('LGPL') /* Service program library. */
+
+ DCL VAR(&CFLAGS) TYPE(*CHAR) +
+ VALUE('OPTIMIZE(40)') /* Compile options. */
+
+
+/* Working storage. */
+
+ DCL VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300) /* Command length. */
+ DCL VAR(&CMD) TYPE(*CHAR) LEN(512)
+
+
+/* Compile sources into modules. */
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/ADLER32) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/COMPRESS) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/CRC32) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/DEFLATE) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/GZIO) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFBACK) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFFAST) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFLATE) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFTREES) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/TREES) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/UNCOMPR) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/ZUTIL) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/* Link modules into a service program. */
+
+ CRTSRVPGM SRVPGM(&SRVLIB/ZLIB) +
+ MODULE(&MODLIB/ADLER32 &MODLIB/COMPRESS +
+ &MODLIB/CRC32 &MODLIB/DEFLATE +
+ &MODLIB/GZIO &MODLIB/INFBACK +
+ &MODLIB/INFFAST &MODLIB/INFLATE +
+ &MODLIB/INFTREES &MODLIB/TREES +
+ &MODLIB/UNCOMPR &MODLIB/ZUTIL) +
+ SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
+ TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
+
+ ENDPGM

Added: vendor/zlib/current/as400/readme.txt
==============================================================================
--- (empty file)
+++ vendor/zlib/current/as400/readme.txt Sun Jun 15 19:11:06 2008
@@ -0,0 +1,111 @@
+ ZLIB version 1.2.3 for AS400 installation instructions
+
+I) From an AS400 *SAVF file:
+
+1) Unpacking archive to an AS400 save file
+
+On the AS400:
+
+_ Create the ZLIB AS400 library:
+
+ CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+_ Create a work save file, for example:
+
+ CRTSAVF FILE(ZLIB/ZLIBSAVF)
+
+On a PC connected to the target AS400:
+
+_ Unpack the save file image to a PC file "ZLIBSAVF"
+_ Upload this file into the save file on the AS400, for example
+ using ftp in BINARY mode.
+
+
+2) Populating the ZLIB AS400 source library
+
+On the AS400:
+
+_ Extract the saved objects into the ZLIB AS400 library using:
+
+RSTOBJ OBJ(*ALL) SAVLIB(ZLIB) DEV(*SAVF) SAVF(ZLIB/ZLIBSAVF) RSTLIB(ZLIB)
+
+
+3) Customize installation:
+
+_ Edit CL member ZLIB/TOOLS(COMPILE) and change parameters if needed,
+ according to the comments.
+
+_ Compile this member with:
+
+ CRTCLPGM PGM(ZLIB/COMPILE) SRCFILE(ZLIB/TOOLS) SRCMBR(COMPILE)
+
+
+4) Compile and generate the service program:
+
+_ This can now be done by executing:
+
+ CALL PGM(ZLIB/COMPILE)
+
+
+
+II) From the original source distribution:
+
+1) On the AS400, create the source library:
+
+ CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+2) Create the source files:
+
+ CRTSRCPF FILE(ZLIB/SOURCES) RCDLEN(112) TEXT('ZLIB library modules')
+ CRTSRCPF FILE(ZLIB/H) RCDLEN(112) TEXT('ZLIB library includes')
+ CRTSRCPF FILE(ZLIB/TOOLS) RCDLEN(112) TEXT('ZLIB library control utilities')
+
+3) From the machine hosting the distribution files, upload them (with
+ FTP in text mode, for example) according to the following table:
+
+ Original AS400 AS400 AS400 AS400
+ file file member type description
+ SOURCES Original ZLIB C subprogram sources
+ adler32.c ADLER32 C ZLIB - Compute the Adler-32 checksum of a dta strm
+ compress.c COMPRESS C ZLIB - Compress a memory buffer
+ crc32.c CRC32 C ZLIB - Compute the CRC-32 of a data stream
+ deflate.c DEFLATE C ZLIB - Compress data using the deflation algorithm
+ gzio.c GZIO C ZLIB - IO on .gz files
+ infback.c INFBACK C ZLIB - Inflate using a callback interface
+ inffast.c INFFAST C ZLIB - Fast proc. literals & length/distance pairs
+ inflate.c INFLATE C ZLIB - Interface to inflate modules
+ inftrees.c INFTREES C ZLIB - Generate Huffman trees for efficient decode
+ trees.c TREES C ZLIB - Output deflated data using Huffman coding
+ uncompr.c UNCOMPR C ZLIB - Decompress a memory buffer
+ zutil.c ZUTIL C ZLIB - Target dependent utility functions
+ H Original ZLIB C and ILE/RPG include files
+ crc32.h CRC32 C ZLIB - CRC32 tables
+ deflate.h DEFLATE C ZLIB - Internal compression state
+ inffast.h INFFAST C ZLIB - Header to use inffast.c
+ inffixed.h INFFIXED C ZLIB - Table for decoding fixed codes
+ inflate.h INFLATE C ZLIB - Internal inflate state definitions
+ inftrees.h INFTREES C ZLIB - Header to use inftrees.c
+ trees.h TREES C ZLIB - Created automatically with -DGEN_TREES_H
+ zconf.h ZCONF C ZLIB - Compression library configuration
+ zlib.h ZLIB C ZLIB - Compression library C user interface
+ as400/zlib.inc ZLIB.INC RPGLE ZLIB - Compression library ILE RPG user interface
+ zutil.h ZUTIL C ZLIB - Internal interface and configuration
+ TOOLS Building source software & AS/400 README
+ as400/bndsrc BNDSRC Entry point exportation list
+ as400/compile.clp COMPILE CLP Compile sources & generate service program
+ as400/readme.txt README TXT Installation instructions
+
+4) Continue as in I)3).
+
+
+
+
+Notes: For AS400 ILE RPG programmers, a /copy member defining the ZLIB
+ API prototypes for ILE RPG can be found in ZLIB/H(ZLIB.INC).
+ Please read comments in this member for more information.
+
+ Remember that most foreign textual data are ASCII coded: this
+ implementation does not handle conversion from/to ASCII, so
+ text data code conversions must be done explicitely.
+
+ Always open zipped files in binary mode.

Added: vendor/zlib/current/as400/zlib.inc
==============================================================================
--- (empty file)
+++ vendor/zlib/current/as400/zlib.inc Sun Jun 15 19:11:06 2008
@@ -0,0 +1,331 @@
+ * ZLIB.INC - Interface to the general purpose compression library
+ *
+ * ILE RPG400 version by Patrick Monnerat, DATASPHERE.
+ * Version 1.2.3
+ *
+ *
+ * WARNING:
+ * Procedures inflateInit(), inflateInit2(), deflateInit(),
+ * deflateInit2() and inflateBackInit() need to be called with
+ * two additional arguments:
+ * the package version string and the stream control structure.
+ * size. This is needed because RPG lacks some macro feature.
+ * Call these procedures as:
+ * inflateInit(...: ZLIB_VERSION: %size(z_stream))
+ *
+ /if not defined(ZLIB_H_)
+ /define ZLIB_H_
+ *
+ **************************************************************************
+ * Constants
+ **************************************************************************
+ *
+ * Versioning information.
+ *
+ D ZLIB_VERSION C '1.2.3'
+ D ZLIB_VERNUM C X'1230'
+ *
+ * Other equates.
+ *
+ D Z_NO_FLUSH C 0
+ D Z_SYNC_FLUSH C 2
+ D Z_FULL_FLUSH C 3
+ D Z_FINISH C 4
+ D Z_BLOCK C 5
+ *
+ D Z_OK C 0
+ D Z_STREAM_END C 1
+ D Z_NEED_DICT C 2
+ D Z_ERRNO C -1
+ D Z_STREAM_ERROR C -2
+ D Z_DATA_ERROR C -3
+ D Z_MEM_ERROR C -4
+ D Z_BUF_ERROR C -5
+ DZ_VERSION_ERROR C -6
+ *
+ D Z_NO_COMPRESSION...
+ D C 0
+ D Z_BEST_SPEED C 1
+ D Z_BEST_COMPRESSION...
+ D C 9
+ D Z_DEFAULT_COMPRESSION...
+ D C -1
+ *
+ D Z_FILTERED C 1
+ D Z_HUFFMAN_ONLY C 2
+ D Z_RLE C 3
+ D Z_DEFAULT_STRATEGY...
+ D C 0
+ *
+ D Z_BINARY C 0
+ D Z_ASCII C 1
+ D Z_UNKNOWN C 2
+ *
+ D Z_DEFLATED C 8
+ *
+ D Z_NULL C 0
+ *
+ **************************************************************************
+ * Types
+ **************************************************************************
+ *
+ D z_streamp S * Stream struct ptr
+ D gzFile S * File pointer
+ D z_off_t S 10i 0 Stream offsets
+ *
+ **************************************************************************
+ * Structures
+ **************************************************************************
+ *
+ * The GZIP encode/decode stream support structure.
+ *
+ D z_stream DS align based(z_streamp)
+ D zs_next_in * Next input byte
+ D zs_avail_in 10U 0 Byte cnt at next_in
+ D zs_total_in 10U 0 Total bytes read
+ D zs_next_out * Output buffer ptr
+ D zs_avail_out 10U 0 Room left @ next_out
+ D zs_total_out 10U 0 Total bytes written
+ D zs_msg * Last errmsg or null
+ D zs_state * Internal state
+ D zs_zalloc * procptr Int. state allocator
+ D zs_free * procptr Int. state dealloc.
+ D zs_opaque * Private alloc. data
+ D zs_data_type 10i 0 ASC/BIN best guess
+ D zs_adler 10u 0 Uncompr. adler32 val
+ D 10U 0 Reserved
+ D 10U 0 Ptr. alignment
+ *
+ **************************************************************************
+ * Utility function prototypes
+ **************************************************************************
+ *
+ D compress PR 10I 0 extproc('compress')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10u 0 value Source length
+ *
+ D compress2 PR 10I 0 extproc('compress2')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ D level 10I 0 value Compression level
+ *
+ D compressBound PR 10U 0 extproc('compressBound')
+ D sourceLen 10U 0 value
+ *
+ D uncompress PR 10I 0 extproc('uncompress')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ *
+ D gzopen PR extproc('gzopen')
+ D like(gzFile)
+ D path * value options(*string) File pathname
+ D mode * value options(*string) Open mode
+ *
+ D gzdopen PR extproc('gzdopen')
+ D like(gzFile)
+ D fd 10i 0 value File descriptor
+ D mode * value options(*string) Open mode
+ *
+ D gzsetparams PR 10I 0 extproc('gzsetparams')
+ D file value like(gzFile) File pointer
+ D level 10I 0 value
+ D strategy 10i 0 value
+ *
+ D gzread PR 10I 0 extproc('gzread')
+ D file value like(gzFile) File pointer
+ D buf 32767 options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzwrite PR 10I 0 extproc('gzwrite')
+ D file value like(gzFile) File pointer
+ D buf 32767 const options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzputs PR 10I 0 extproc('gzputs')
+ D file value like(gzFile) File pointer
+ D s * value options(*string) String to output
+ *
+ D gzgets PR * extproc('gzgets')
+ D file value like(gzFile) File pointer
+ D buf 32767 options(*varsize) Read buffer
+ D len 10i 0 value Buffer length
+ *
+ D gzflush PR 10i 0 extproc('gzflush')
+ D file value like(gzFile) File pointer
+ D flush 10I 0 value Type of flush
+ *
+ D gzseek PR extproc('gzseek')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ D offset value like(z_off_t) Offset
+ D whence 10i 0 value Origin
+ *
+ D gzrewind PR 10i 0 extproc('gzrewind')
+ D file value like(gzFile) File pointer
+ *
+ D gztell PR extproc('gztell')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ *
+ D gzeof PR 10i 0 extproc('gzeof')
+ D file value like(gzFile) File pointer
+ *
+ D gzclose PR 10i 0 extproc('gzclose')
+ D file value like(gzFile) File pointer
+ *
+ D gzerror PR * extproc('gzerror') Error string
+ D file value like(gzFile) File pointer
+ D errnum 10I 0 Error code
+ *
+ D gzclearerr PR extproc('gzclearerr')
+ D file value like(gzFile) File pointer
+ *
+ **************************************************************************
+ * Basic function prototypes
+ **************************************************************************
+ *
+ D zlibVersion PR * extproc('zlibVersion') Version string
+ *
+ D deflateInit PR 10I 0 extproc('deflateInit_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflate PR 10I 0 extproc('deflate') Compress data
+ D strm like(z_stream) Compression stream
+ D flush 10I 0 value Flush type required
+ *
+ D deflateEnd PR 10I 0 extproc('deflateEnd') Termin. compression
+ D strm like(z_stream) Compression stream
+ *
+ D inflateInit PR 10I 0 extproc('inflateInit_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflate PR 10I 0 extproc('inflate') Expand data
+ D strm like(z_stream) Expansion stream
+ D flush 10I 0 value Flush type required
+ *
+ D inflateEnd PR 10I 0 extproc('inflateEnd') Termin. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ **************************************************************************
+ * Advanced function prototypes
+ **************************************************************************
+ *
+ D deflateInit2 PR 10I 0 extproc('deflateInit2_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D method 10I 0 value Compression method
+ D windowBits 10I 0 value log2(window size)
+ D memLevel 10I 0 value Mem/cmpress tradeoff
+ D strategy 10I 0 value Compression stategy
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflateSetDictionary...
+ D PR 10I 0 extproc('deflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Compression stream
+ D dictionary 32767 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D deflateCopy PR 10I 0 extproc('deflateCopy') Compress strm 2 strm
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D deflateReset PR 10I 0 extproc('deflateReset') End and init. stream
+ D strm like(z_stream) Compression stream
+ *
+ D deflateParams PR 10I 0 extproc('deflateParams') Change level & strat
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D strategy 10I 0 value Compression stategy
+ *
+ D deflateBound PR 10U 0 extproc('deflateBound') Change level & strat
+ D strm like(z_stream) Compression stream
+ D sourcelen 10U 0 value Compression level
+ *
+ D deflatePrime PR 10I 0 extproc('deflatePrime') Change level & strat
+ D strm like(z_stream) Compression stream
+ D bits 10I 0 value Number of bits to insert
+ D value 10I 0 value Bits to insert
+ *
+ D inflateInit2 PR 10I 0 extproc('inflateInit2_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value log2(window size)
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateSetDictionary...
+ D PR 10I 0 extproc('inflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Expansion stream
+ D dictionary 32767 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D inflateSync PR 10I 0 extproc('inflateSync') Sync. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateCopy PR 10I 0 extproc('inflateCopy')
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D inflateReset PR 10I 0 extproc('inflateReset') End and init. stream
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateBackInit...
+ D PR 10I 0 extproc('inflateBackInit_')
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value Log2(buffer size)
+ D window 32767 options(*varsize) Buffer
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateBack PR 10I 0 extproc('inflateBack')
+ D strm like(z_stream) Expansion stream
+ D in * value procptr Input function
+ D in_desc * value Input descriptor
+ D out * value procptr Output function
+ D out_desc * value Output descriptor
+ *
+ D inflateBackEnd PR 10I 0 extproc('inflateBackEnd')
+ D strm like(z_stream) Expansion stream
+ *
+ D zlibCompileFlags...
+ D PR 10U 0 extproc('zlibCompileFlags')
+ *
+ **************************************************************************
+ * Checksum function prototypes
+ **************************************************************************
+ *
+ D adler32 PR 10U 0 extproc('adler32') New checksum
+ D adler 10U 0 value Old checksum
+ D buf 32767 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ D crc32 PR 10U 0 extproc('crc32') New checksum
+ D crc 10U 0 value Old checksum
+ D buf 32767 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ **************************************************************************
+ * Miscellaneous function prototypes
+ **************************************************************************
+ *
+ D zError PR * extproc('zError') Error string
+ D err 10I 0 value Error code
+ *
+ D inflateSyncPoint...
+ D PR 10I 0 extproc('inflateSyncPoint')
+ D strm like(z_stream) Expansion stream
+ *
+ D get_crc_table PR * extproc('get_crc_table') Ptr to ulongs
+ *
+ /endif

Added: vendor/zlib/current/compress.c
==============================================================================
--- (empty file)
+++ vendor/zlib/current/compress.c Sun Jun 15 19:11:06 2008
@@ -0,0 +1,79 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+ int level;
+{
+ z_stream stream;
+ int err;
+
+ stream.next_in = (Bytef*)source;
+ stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+ /* Check for source > 64K on 16-bit machine: */
+ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+ stream.next_out = dest;
+ stream.avail_out = (uInt)*destLen;
+ if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+ stream.zalloc = (alloc_func)0;
+ stream.zfree = (free_func)0;
+ stream.opaque = (voidpf)0;
+
+ err = deflateInit(&stream, level);
+ if (err != Z_OK) return err;
+
+ err = deflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ deflateEnd(&stream);
+ return err == Z_OK ? Z_BUF_ERROR : err;
+ }
+ *destLen = stream.total_out;
+
+ err = deflateEnd(&stream);
+ return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+{
+ return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+ If the default memLevel or windowBits for deflateInit() is changed, then
+ this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+ uLong sourceLen;
+{
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+}

Added: vendor/zlib/current/configure
==============================================================================
--- (empty file)
+++ vendor/zlib/current/configure Sun Jun 15 19:11:06 2008
@@ -0,0 +1,459 @@
+#!/bin/sh
+# configure script for zlib. This script is needed only if
+# you wish to build a shared library and your system supports them,
+# of if you need special compiler, flags or install directory.
+# Otherwise, you can just use directly "make test; make install"
+#
+# To create a shared library, use "configure --shared"; by default a static
+# library is created. If the primitive shared library support provided here
+# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+#
+# To impose specific compiler or flags or install directory, use for example:
+# prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+# LDSHARED is the command to be used to create a shared library
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+LIBS=libz.a
+LDFLAGS="-L. ${LIBS}"
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
+VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+AR=${AR-"ar rc"}
+RANLIB=${RANLIB-"ranlib"}
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+includedir=${includedir-'${prefix}/include'}
+mandir=${mandir-'${prefix}/share/man'}
+shared_ext='.so'
+shared=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+while test $# -ge 1
+do
+case "$1" in
+ -h* | --h*)
+ echo 'usage:'
+ echo ' configure [--shared] [--prefix=PREFIX] [--exec_prefix=EXPREFIX]'
+ echo ' [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+ exit 0;;
+ -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+ -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+ -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+ -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+ -p* | --p*) prefix="$2"; shift; shift;;
+ -e* | --e*) exec_prefix="$2"; shift; shift;;
+ -l* | --l*) libdir="$2"; shift; shift;;
+ -i* | --i*) includedir="$2"; shift; shift;;
+ -s* | --s*) shared=1; shift;;
+ *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;;
+ esac
+done
+
+test=ztest$$
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+ *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+ CC="$cc"
+ SFLAGS=${CFLAGS-"-fPIC -O3"}
+ CFLAGS="$cflags"
+ case `(uname -s || echo unknown) 2>/dev/null` in
+ Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
+ CYGWIN* | Cygwin* | cygwin* | OS/2* )
+ EXE='.exe';;
+ QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
+ # (alain.b...@icbt.com)
+ LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
+ HP-UX*)
+ LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
+ shared_ext='.sl'
+ SHAREDLIB='libz.sl';;
+ esac;;
+ Darwin*) shared_ext='.dylib'
+ SHAREDLIB=libz$shared_ext
+ SHAREDLIBV=libz.$VER$shared_ext
+ SHAREDLIBM=libz.$VER1$shared_ext
+ LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"};;
+ *) LDSHARED=${LDSHARED-"$cc -shared"};;
+ esac
+else
+ # find system name and corresponding cc options
+ CC=${CC-cc}
+ case `(uname -sr || echo unknown) 2>/dev/null` in
+ HP-UX*) SFLAGS=${CFLAGS-"-O +z"}
+ CFLAGS=${CFLAGS-"-O"}
+# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+ LDSHARED=${LDSHARED-"ld -b"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
+ shared_ext='.sl'
+ SHAREDLIB='libz.sl';;
+ esac;;
+ IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+ CFLAGS=${CFLAGS-"-ansi -O2"}
+ LDSHARED=${LDSHARED-"cc -shared"};;
+ OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+ CFLAGS=${CFLAGS-"-O -std1"}
+ LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+ OSF1*) SFLAGS=${CFLAGS-"-O -std1"}
+ CFLAGS=${CFLAGS-"-O -std1"}
+ LDSHARED=${LDSHARED-"cc -shared"};;
+ QNX*) SFLAGS=${CFLAGS-"-4 -O"}
+ CFLAGS=${CFLAGS-"-4 -O"}
+ LDSHARED=${LDSHARED-"cc"}
+ RANLIB=${RANLIB-"true"}
+ AR="cc -A";;
+ SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+ CFLAGS=${CFLAGS-"-O3"}
+ LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
+ SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+ CFLAGS=${CFLAGS-"-fast -xcg89"}
+ LDSHARED=${LDSHARED-"cc -G"};;
+ SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+ CFLAGS=${CFLAGS-"-O2"}
+ LDSHARED=${LDSHARED-"ld"};;
+ SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+ CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"}
+ LDSHARED=${LDSHARED-"cc -xarch=v9b"};;
+ UNIX_System_V\ 4.2.0)
+ SFLAGS=${CFLAGS-"-KPIC -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"};;
+ UNIX_SV\ 4.2MP)
+ SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"};;
+ OpenUNIX\ 5)
+ SFLAGS=${CFLAGS-"-KPIC -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"};;
+ AIX*) # Courtesy of dba...@arrayasolutions.com
+ SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+ CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+ LDSHARED=${LDSHARED-"xlc -G"};;
+ # send working options for other systems to sup...@gzip.org
+ *) SFLAGS=${CFLAGS-"-O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -shared"};;
+ esac
+fi
+
+SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
+SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
+SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
+
+if test $shared -eq 1; then
+ echo Checking for shared library support...
+ # we must test in two steps (cc then ld), required at least on SunOS 4.x
+ if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+ test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+ CFLAGS="$SFLAGS"
+ LIBS="$SHAREDLIBV"
+ echo Building shared library $SHAREDLIBV with $CC.
+ elif test -z "$old_cc" -a -z "$old_cflags"; then
+ echo No shared library support.
+ shared=0;
+ else
+ echo 'No shared library support; try without defining CC and CFLAGS'
+ shared=0;
+ fi
+fi
+if test $shared -eq 0; then
+ LDSHARED="$CC"
+ echo Building static library $LIBS version $VER with $CC.
+else
+ LDFLAGS="-L. ${SHAREDLIBV}"
+fi
+
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ sed < zconf.in.h "/HAVE_UNISTD_H/s%0%1%" > zconf.h
+ echo "Checking for unistd.h... Yes."
+else
+ cp -p zconf.in.h zconf.h
+ echo "Checking for unistd.h... No."
+fi
+
+cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+#include "zconf.h"
+
+int main()
+{
+#ifndef STDC
+ choke me
+#endif
+
+ return 0;
+}
+EOF
+
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()"
+
+ cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(char *fmt, ...)
+{
+ char buf[20];
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ va_end(ap);
+ return 0;
+}
+
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+
+ if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+ echo "Checking for vsnprintf() in stdio.h... Yes."
+
+ cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(char *fmt, ...)
+{
+ int n;
+ char buf[20];
+ va_list ap;
+
+ va_start(ap, fmt);
+ n = vsnprintf(buf, sizeof(buf), fmt, ap);
+ va_end(ap);
+ return n;
+}
+
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+
+ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking for return value of vsnprintf()... Yes."
+ else
+ CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+ echo "Checking for return value of vsnprintf()... No."
+ echo " WARNING: apparently vsnprintf() does not return a value. zlib"
+ echo " can build but will be open to possible string-format security"
+ echo " vulnerabilities."
+ fi
+ else
+ CFLAGS="$CFLAGS -DNO_vsnprintf"
+ echo "Checking for vsnprintf() in stdio.h... No."
+ echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib"
+ echo " can build but will be open to possible buffer-overflow security"
+ echo " vulnerabilities."
+
+ cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(char *fmt, ...)
+{
+ int n;
+ char buf[20];
+ va_list ap;
+
+ va_start(ap, fmt);
+ n = vsprintf(buf, fmt, ap);
+ va_end(ap);
+ return n;
+}
+
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+
+ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking for return value of vsprintf()... Yes."
+ else
+ CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+ echo "Checking for return value of vsprintf()... No."
+ echo " WARNING: apparently vsprintf() does not return a value. zlib"
+ echo " can build but will be open to possible string-format security"
+ echo " vulnerabilities."
+ fi
+ fi
+else
+ echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()"
+
+ cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+ char buf[20];
+
+ snprintf(buf, sizeof(buf), "%s", "foo");
+ return 0;
+}
+
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+ echo "Checking for snprintf() in stdio.h... Yes."
+
+ cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+ char buf[20];
+
+ return snprintf(buf, sizeof(buf), "%s", "foo");
+}
+
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking for return value of snprintf()... Yes."
+ else
+ CFLAGS="$CFLAGS -DHAS_snprintf_void"
+ echo "Checking for return value of snprintf()... No."
+ echo " WARNING: apparently snprintf() does not return a value. zlib"
+ echo " can build but will be open to possible string-format security"
+ echo " vulnerabilities."
+ fi
+ else
+ CFLAGS="$CFLAGS -DNO_snprintf"
+ echo "Checking for snprintf() in stdio.h... No."
+ echo " WARNING: snprintf() not found, falling back to sprintf(). zlib"
+ echo " can build but will be open to possible buffer-overflow security"
+ echo " vulnerabilities."
+
+ cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+ char buf[20];
+
+ return sprintf(buf, "%s", "foo");
+}
+
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking for return value of sprintf()... Yes."
+ else
+ CFLAGS="$CFLAGS -DHAS_sprintf_void"
+ echo "Checking for return value of sprintf()... No."
+ echo " WARNING: apparently sprintf() does not return a value. zlib"
+ echo " can build but will be open to possible string-format security"
+ echo " vulnerabilities."
+ fi
+ fi
+fi
+
+cat >$test.c <<EOF
+#include <errno.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ echo "Checking for errno.h... Yes."
+else
+ echo "Checking for errno.h... No."
+ CFLAGS="$CFLAGS -DNO_ERRNO_H"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+ return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0);
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+ CFLAGS="$CFLAGS -DUSE_MMAP"
+ echo Checking for mmap support... Yes.
+else
+ echo Checking for mmap support... No.
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+ *ASMV*)
+ if test "`nm $test.o | grep _hello`" = ""; then
+ CPP="$CPP -DNO_UNDERLINE"
+ echo Checking for underline in external names... No.
+ else
+ echo Checking for underline in external names... Yes.
+ fi;;
+esac
+
+rm -f $test.[co] $test $test$shared_ext
+
+# udpate Makefile
+sed < Makefile.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^LIBS *=/s#=.*#=$LIBS#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+" > Makefile

Added: vendor/zlib/current/contrib/README.contrib
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/README.contrib Sun Jun 15 19:11:06 2008
@@ -0,0 +1,71 @@
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+ada/ by Dmitriy Anisimkov <anis...@yahoo.com>
+ Support for Ada
+ See http://zlib-ada.sourceforge.net/
+
+asm586/
+asm686/ by Brian Raiter <brea...@muppetlabs.com>
+ asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+blast/ by Mark Adler <mad...@alumni.caltech.edu>
+ Decompressor for output of PKWare Data Compression Library (DCL)
+
+delphi/ by Cosmin Truta <cos...@cs.ubbcluj.ro>
+ Support for Delphi and C++ Builder
+
+dotzlib/ by Henrik Ravn <hen...@ravn.com>
+ Support for Microsoft .Net and Visual C++ .Net
+
+infback9/ by Mark Adler <mad...@alumni.caltech.edu>
+ Unsupported diffs to infback to decode the deflate64 format
+
+inflate86/ by Chris Anderson <chri...@charm.net>
+ Tuned x86 gcc asm code to replace inflate_fast()
+
+iostream/ by Kevin Ruland <ke...@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/ by Tyge L�vset <Tyge....@cmr.no>
+ Another C++ I/O streams interface
+
+iostream3/ by Ludwig Schwardt <schw...@sun.ac.za>
+ and Kevin Ruland <ke...@rodin.wustl.edu>
+ Yet another C++ I/O streams interface
+
+masm686/ by Dan Higdon <hd...@kinesoft.com>
+ and Chuck Walbourn <chu...@kinesoft.com>
+ asm code for Pentium Pro/PII, using the MASM syntax
+
+masmx64/ by Gilles Vollant <in...@winimage.com>
+ x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+ replace longest_match() and inflate_fast()
+
+masmx86/ by Gilles Vollant <in...@winimage.com>
+ x86 asm code to replace longest_match() and inflate_fast(),
+ for Visual C++ and MASM
+
+minizip/ by Gilles Vollant <in...@winimage.com>
+ Mini zip and unzip based on zlib
+ See http://www.winimage.com/zLibDll/unzip.html
+
+pascal/ by Bob Dellaca <bo...@xtra.co.nz> et al.
+ Support for Pascal
+
+puff/ by Mark Adler <mad...@alumni.caltech.edu>
+ Small, low memory usage inflate. Also serves to provide an
+ unambiguous description of the deflate format.
+
+testzlib/ by Gilles Vollant <in...@winimage.com>
+ Example of the use of zlib
+
+untgz/ by Pedro A. Aranda Gutierrez <pa...@tid.es>
+ A very simple tar.gz file extractor using zlib
+
+vstudio/ by Gilles Vollant <in...@winimage.com>
+ Building a minizip-enhanced zlib with Microsoft Visual Studio

Added: vendor/zlib/current/contrib/ada/buffer_demo.adb
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/buffer_demo.adb Sun Jun 15 19:11:06 2008
@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2004 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+--
+-- $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+-- This demo program provided by Dr Steve Sangwine <s...@essex.ac.uk>
+--
+-- Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+-- of exactly the correct size is used for decompressed data, and the last
+-- few bytes passed in to Zlib are checksum bytes.
+
+-- This program compresses a string of text, and then decompresses the
+-- compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+ EOL : Character renames ASCII.LF;
+ Text : constant String
+ := "Four score and seven years ago our fathers brought forth," & EOL &
+ "upon this continent, a new nation, conceived in liberty," & EOL &
+ "and dedicated to the proposition that `all men are created equal'.";
+
+ Source : Stream_Element_Array (1 .. Text'Length);
+ for Source'Address use Text'Address;
+
+begin
+ Ada.Text_IO.Put (Text);
+ Ada.Text_IO.New_Line;
+ Ada.Text_IO.Put_Line
+ ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+ declare
+ Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+ L : Stream_Element_Offset;
+ begin
+ Compress : declare
+ Compressor : Filter_Type;
+ I : Stream_Element_Offset;
+ begin
+ Deflate_Init (Compressor);
+
+ -- Compress the whole of T at once.
+
+ Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+ pragma Assert (I = Source'Last);
+
+ Close (Compressor);
+
+ Ada.Text_IO.Put_Line
+ ("Compressed size : "
+ & Stream_Element_Offset'Image (L) & " bytes");
+ end Compress;
+
+ -- Now we decompress the data, passing short blocks of data to Zlib
+ -- (because this demonstrates the problem - the last block passed will
+ -- contain checksum information and there will be no output, only a
+ -- check inside Zlib that the checksum is correct).
+
+ Decompress : declare
+ Decompressor : Filter_Type;
+
+ Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+ Block_Size : constant := 4;
+ -- This makes sure that the last block contains
+ -- only Adler checksum data.
+
+ P : Stream_Element_Offset := Compressed_Data'First - 1;
+ O : Stream_Element_Offset;
+ begin
+ Inflate_Init (Decompressor);
+
+ loop
+ Translate
+ (Decompressor,
+ Compressed_Data
+ (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+ P,
+ Uncompressed_Data
+ (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+ O,
+ No_Flush);
+
+ Ada.Text_IO.Put_Line
+ ("Total in : " & Count'Image (Total_In (Decompressor)) &
+ ", out : " & Count'Image (Total_Out (Decompressor)));
+
+ exit when P = L;
+ end loop;
+
+ Ada.Text_IO.New_Line;
+ Ada.Text_IO.Put_Line
+ ("Decompressed text matches original text : "
+ & Boolean'Image (Uncompressed_Data = Source));
+ end Decompress;
+ end;
+end Buffer_Demo;

Added: vendor/zlib/current/contrib/ada/mtest.adb
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/mtest.adb Sun Jun 15 19:11:06 2008
@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+-- Continuous test for ZLib multithreading. If the test would fail
+-- we should provide thread safe allocation routines for the Z_Stream.
+--
+-- $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+ use Ada.Streams;
+ use ZLib;
+
+ Stop : Boolean := False;
+
+ pragma Atomic (Stop);
+
+ subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is
+ new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ task type Test_Task;
+
+ task body Test_Task is
+ Buffer : Stream_Element_Array (1 .. 100_000);
+ Gen : Random_Elements.Generator;
+
+ Buffer_First : Stream_Element_Offset;
+ Compare_First : Stream_Element_Offset;
+
+ Deflate : Filter_Type;
+ Inflate : Filter_Type;
+
+ procedure Further (Item : in Stream_Element_Array);
+
+ procedure Read_Buffer
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset);
+
+ -------------
+ -- Further --
+ -------------
+
+ procedure Further (Item : in Stream_Element_Array) is
+
+ procedure Compare (Item : in Stream_Element_Array);
+
+ -------------
+ -- Compare --
+ -------------
+
+ procedure Compare (Item : in Stream_Element_Array) is
+ Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+ begin
+ if Buffer (Compare_First .. Next_First - 1) /= Item then
+ raise Program_Error;
+ end if;
+
+ Compare_First := Next_First;
+ end Compare;
+
+ procedure Compare_Write is new ZLib.Write (Write => Compare);
+ begin
+ Compare_Write (Inflate, Item, No_Flush);
+ end Further;
+
+ -----------------
+ -- Read_Buffer --
+ -----------------
+
+ procedure Read_Buffer
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset)
+ is
+ Buff_Diff : Stream_Element_Offset := Buffer'Last - Buffer_First;
+ Next_First : Stream_Element_Offset;
+ begin
+ if Item'Length <= Buff_Diff then
+ Last := Item'Last;
+
+ Next_First := Buffer_First + Item'Length;
+
+ Item := Buffer (Buffer_First .. Next_First - 1);
+
+ Buffer_First := Next_First;
+ else
+ Last := Item'First + Buff_Diff;
+ Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+ Buffer_First := Buffer'Last + 1;
+ end if;
+ end Read_Buffer;
+
+ procedure Translate is new Generic_Translate
+ (Data_In => Read_Buffer,
+ Data_Out => Further);
+
+ begin
+ Random_Elements.Reset (Gen);
+
+ Buffer := (others => 20);
+
+ Main : loop
+ for J in Buffer'Range loop
+ Buffer (J) := Random_Elements.Random (Gen);
+
+ Deflate_Init (Deflate);
+ Inflate_Init (Inflate);
+
+ Buffer_First := Buffer'First;
+ Compare_First := Buffer'First;
+
+ Translate (Deflate);
+
+ if Compare_First /= Buffer'Last + 1 then
+ raise Program_Error;
+ end if;
+
+ Ada.Text_IO.Put_Line
+ (Ada.Task_Identification.Image
+ (Ada.Task_Identification.Current_Task)
+ & Stream_Element_Offset'Image (J)
+ & ZLib.Count'Image (Total_Out (Deflate)));
+
+ Close (Deflate);
+ Close (Inflate);
+
+ exit Main when Stop;
+ end loop;
+ end loop Main;
+ exception
+ when E : others =>
+ Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+ Stop := True;
+ end Test_Task;
+
+ Test : array (1 .. 4) of Test_Task;
+
+ pragma Unreferenced (Test);
+
+ Dummy : Character;
+
+begin
+ Ada.Text_IO.Get_Immediate (Dummy);
+ Stop := True;
+end MTest;

Added: vendor/zlib/current/contrib/ada/read.adb
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/read.adb Sun Jun 15 19:11:06 2008
@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
+
+-- Test/demo program for the generic read interface.
+
+with Ada.Numerics.Discrete_Random;
+with Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib;
+
+procedure Read is
+
+ use Ada.Streams;
+
+ ------------------------------------
+ -- Test configuration parameters --
+ ------------------------------------
+
+ File_Size : Stream_Element_Offset := 100_000;
+
+ Continuous : constant Boolean := False;
+ -- If this constant is True, the test would be repeated again and again,
+ -- with increment File_Size for every iteration.
+
+ Header : constant ZLib.Header_Type := ZLib.Default;
+ -- Do not use Header other than Default in ZLib versions 1.1.4 and older.
+
+ Init_Random : constant := 8;
+ -- We are using the same random sequence, in case of we catch bug,
+ -- so we would be able to reproduce it.
+
+ -- End --
+
+ Pack_Size : Stream_Element_Offset;
+ Offset : Stream_Element_Offset;
+
+ Filter : ZLib.Filter_Type;
+
+ subtype Visible_Symbols
+ is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is new
+ Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ Gen : Random_Elements.Generator;
+ Period : constant Stream_Element_Offset := 200;
+ -- Period constant variable for random generator not to be very random.
+ -- Bigger period, harder random.
+
+ Read_Buffer : Stream_Element_Array (1 .. 2048);
+ Read_First : Stream_Element_Offset;
+ Read_Last : Stream_Element_Offset;
+
+ procedure Reset;
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Read
+ -- reading data from the File_In.
+
+ procedure Read is new ZLib.Read
+ (Read,
+ Read_Buffer,
+ Rest_First => Read_First,
+ Rest_Last => Read_Last);
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Last := Stream_Element_Offset'Min
+ (Item'Last,
+ Item'First + File_Size - Offset);
+
+ for J in Item'First .. Last loop
+ if J < Item'First + Period then
+ Item (J) := Random_Elements.Random (Gen);
+ else
+ Item (J) := Item (J - Period);
+ end if;
+
+ Offset := Offset + 1;
+ end loop;
+ end Read;
+
+ -----------
+ -- Reset --
+ -----------
+
+ procedure Reset is
+ begin
+ Random_Elements.Reset (Gen, Init_Random);
+ Pack_Size := 0;
+ Offset := 1;
+ Read_First := Read_Buffer'Last + 1;
+ Read_Last := Read_Buffer'Last;
+ end Reset;
+
+begin
+ Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+ loop
+ for Level in ZLib.Compression_Level'Range loop
+
+ Ada.Text_IO.Put ("Level ="
+ & ZLib.Compression_Level'Image (Level));
+
+ -- Deflate using generic instantiation.
+
+ ZLib.Deflate_Init
+ (Filter,
+ Level,
+ Header => Header);
+
+ Reset;
+
+ Ada.Text_IO.Put
+ (Stream_Element_Offset'Image (File_Size) & " ->");
+
+ loop
+ declare
+ Buffer : Stream_Element_Array (1 .. 1024);
+ Last : Stream_Element_Offset;
+ begin
+ Read (Filter, Buffer, Last);
+
+ Pack_Size := Pack_Size + Last - Buffer'First + 1;
+
+ exit when Last < Buffer'Last;
+ end;
+ end loop;
+
+ Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size));
+
+ ZLib.Close (Filter);
+ end loop;
+
+ exit when not Continuous;
+
+ File_Size := File_Size + 1;
+ end loop;
+end Read;

Added: vendor/zlib/current/contrib/ada/readme.txt
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/readme.txt Sun Jun 15 19:11:06 2008
@@ -0,0 +1,65 @@
+ ZLib for Ada thick binding (ZLib.Ada)
+ Release 1.3
+
+ZLib.Ada is a thick binding interface to the popular ZLib data
+compression library, available at http://www.gzip.org/zlib/.
+It provides Ada-style access to the ZLib C library.
+
+
+ Here are the main changes since ZLib.Ada 1.2:
+
+- Attension: ZLib.Read generic routine have a initialization requirement
+ for Read_Last parameter now. It is a bit incompartible with previous version,
+ but extends functionality, we could use new parameters Allow_Read_Some and
+ Flush now.
+
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
+
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+ Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+ computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
+
+
+ How to build ZLib.Ada under GNAT
+
+You should have the ZLib library already build on your computer, before
+building ZLib.Ada. Make the directory of ZLib.Ada sources current and
+issue the command:
+
+ gnatmake test -largs -L<directory where libz.a is> -lz
+
+Or use the GNAT project file build for GNAT 3.15 or later:
+
+ gnatmake -Pzlib.gpr -L<directory where libz.a is>
+
+
+ How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+
+1. Make a project with all *.ads and *.adb files from the distribution.
+2. Build the libz.a library from the ZLib C sources.
+3. Rename libz.a to z.lib.
+4. Add the library z.lib to the project.
+5. Add the libc.lib library from the ObjectAda distribution to the project.
+6. Build the executable using test.adb as a main procedure.
+
+
+ How to use ZLib.Ada
+
+The source files test.adb and read.adb are small demo programs that show
+the main functionality of ZLib.Ada.
+
+The routines from the package specifications are commented.
+
+
+Homepage: http://zlib-ada.sourceforge.net/
+Author: Dmitriy Anisimkov <anis...@yahoo.com>
+
+Contributors: Pascal Obry <pas...@obry.org>, Steve Sangwine <s...@essex.ac.uk>

Added: vendor/zlib/current/contrib/ada/test.adb
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/test.adb Sun Jun 15 19:11:06 2008
@@ -0,0 +1,463 @@
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $
+
+-- The program has a few aims.
+-- 1. Test ZLib.Ada95 thick binding functionality.
+-- 2. Show the example of use main functionality of the ZLib.Ada95 binding.
+-- 3. Build this program automatically compile all ZLib.Ada95 packages under
+-- GNAT Ada95 compiler.
+
+with ZLib.Streams;
+with Ada.Streams.Stream_IO;
+with Ada.Numerics.Discrete_Random;
+
+with Ada.Text_IO;
+
+with Ada.Calendar;
+
+procedure Test is
+
+ use Ada.Streams;
+ use Stream_IO;
+
+ ------------------------------------
+ -- Test configuration parameters --
+ ------------------------------------
+
+ File_Size : Count := 100_000;
+ Continuous : constant Boolean := False;
+
+ Header : constant ZLib.Header_Type := ZLib.Default;
+ -- ZLib.None;
+ -- ZLib.Auto;
+ -- ZLib.GZip;
+ -- Do not use Header other then Default in ZLib versions 1.1.4
+ -- and older.
+
+ Strategy : constant ZLib.Strategy_Type := ZLib.Default_Strategy;
+ Init_Random : constant := 10;
+
+ -- End --
+
+ In_File_Name : constant String := "testzlib.in";
+ -- Name of the input file
+
+ Z_File_Name : constant String := "testzlib.zlb";
+ -- Name of the compressed file.
+
+ Out_File_Name : constant String := "testzlib.out";
+ -- Name of the decompressed file.
+
+ File_In : File_Type;
+ File_Out : File_Type;
+ File_Back : File_Type;
+ File_Z : ZLib.Streams.Stream_Type;
+
+ Filter : ZLib.Filter_Type;
+
+ Time_Stamp : Ada.Calendar.Time;
+
+ procedure Generate_File;
+ -- Generate file of spetsified size with some random data.
+ -- The random data is repeatable, for the good compression.
+
+ procedure Compare_Streams
+ (Left, Right : in out Root_Stream_Type'Class);
+ -- The procedure compearing data in 2 streams.
+ -- It is for compare data before and after compression/decompression.
+
+ procedure Compare_Files (Left, Right : String);
+ -- Compare files. Based on the Compare_Streams.
+
+ procedure Copy_Streams
+ (Source, Target : in out Root_Stream_Type'Class;
+ Buffer_Size : in Stream_Element_Offset := 1024);
+ -- Copying data from one stream to another. It is for test stream
+ -- interface of the library.
+
+ procedure Data_In
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Generic_Translate.
+ -- reading data from the File_In.
+
+ procedure Data_Out (Item : in Stream_Element_Array);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Generic_Translate.
+ -- writing data to the File_Out.
+
+ procedure Stamp;
+ -- Store the timestamp to the local variable.
+
+ procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count);
+ -- Print the time statistic with the message.
+
+ procedure Translate is new ZLib.Generic_Translate
+ (Data_In => Data_In,
+ Data_Out => Data_Out);
+ -- This procedure is moving data from File_In to File_Out
+ -- with compression or decompression, depend on initialization of
+ -- Filter parameter.
+
+ -------------------
+ -- Compare_Files --
+ -------------------
+
+ procedure Compare_Files (Left, Right : String) is
+ Left_File, Right_File : File_Type;
+ begin
+ Open (Left_File, In_File, Left);
+ Open (Right_File, In_File, Right);
+ Compare_Streams (Stream (Left_File).all, Stream (Right_File).all);
+ Close (Left_File);
+ Close (Right_File);
+ end Compare_Files;
+
+ ---------------------
+ -- Compare_Streams --
+ ---------------------
+
+ procedure Compare_Streams
+ (Left, Right : in out Ada.Streams.Root_Stream_Type'Class)
+ is
+ Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#);
+ Left_Last, Right_Last : Stream_Element_Offset;
+ begin
+ loop
+ Read (Left, Left_Buffer, Left_Last);
+ Read (Right, Right_Buffer, Right_Last);
+
+ if Left_Last /= Right_Last then
+ Ada.Text_IO.Put_Line ("Compare error :"
+ & Stream_Element_Offset'Image (Left_Last)
+ & " /= "
+ & Stream_Element_Offset'Image (Right_Last));
+
+ raise Constraint_Error;
+
+ elsif Left_Buffer (0 .. Left_Last)
+ /= Right_Buffer (0 .. Right_Last)
+ then
+ Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal.");
+ raise Constraint_Error;
+
+ end if;
+
+ exit when Left_Last < Left_Buffer'Last;
+ end loop;
+ end Compare_Streams;
+
+ ------------------
+ -- Copy_Streams --
+ ------------------
+
+ procedure Copy_Streams
+ (Source, Target : in out Ada.Streams.Root_Stream_Type'Class;
+ Buffer_Size : in Stream_Element_Offset := 1024)
+ is
+ Buffer : Stream_Element_Array (1 .. Buffer_Size);
+ Last : Stream_Element_Offset;
+ begin
+ loop
+ Read (Source, Buffer, Last);
+ Write (Target, Buffer (1 .. Last));
+
+ exit when Last < Buffer'Last;
+ end loop;
+ end Copy_Streams;
+
+ -------------
+ -- Data_In --
+ -------------
+
+ procedure Data_In
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Read (File_In, Item, Last);
+ end Data_In;
+
+ --------------
+ -- Data_Out --
+ --------------
+
+ procedure Data_Out (Item : in Stream_Element_Array) is
+ begin
+ Write (File_Out, Item);
+ end Data_Out;
+
+ -------------------
+ -- Generate_File --
+ -------------------
+
+ procedure Generate_File is
+ subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is
+ new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ Gen : Random_Elements.Generator;
+ Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10;
+
+ Buffer_Count : constant Count := File_Size / Buffer'Length;
+ -- Number of same buffers in the packet.
+
+ Density : constant Count := 30; -- from 0 to Buffer'Length - 2;
+
+ procedure Fill_Buffer (J, D : in Count);
+ -- Change the part of the buffer.
+
+ -----------------
+ -- Fill_Buffer --
+ -----------------
+
+ procedure Fill_Buffer (J, D : in Count) is
+ begin
+ for K in 0 .. D loop
+ Buffer
+ (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1))
+ := Random_Elements.Random (Gen);
+
+ end loop;
+ end Fill_Buffer;
+
+ begin
+ Random_Elements.Reset (Gen, Init_Random);
+
+ Create (File_In, Out_File, In_File_Name);
+
+ Fill_Buffer (1, Buffer'Length - 2);
+
+ for J in 1 .. Buffer_Count loop
+ Write (File_In, Buffer);
+
+ Fill_Buffer (J, Density);
+ end loop;
+
+ -- fill remain size.
+
+ Write
+ (File_In,
+ Buffer
+ (1 .. Stream_Element_Offset
+ (File_Size - Buffer'Length * Buffer_Count)));
+
+ Flush (File_In);
+ Close (File_In);
+ end Generate_File;
+
+ ---------------------
+ -- Print_Statistic --
+ ---------------------
+
+ procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is
+ use Ada.Calendar;
+ use Ada.Text_IO;
+
+ package Count_IO is new Integer_IO (ZLib.Count);
+
+ Curr_Dur : Duration := Clock - Time_Stamp;
+ begin
+ Put (Msg);
+
+ Set_Col (20);
+ Ada.Text_IO.Put ("size =");
+
+ Count_IO.Put
+ (Data_Size,
+ Width => Stream_IO.Count'Image (File_Size)'Length);
+
+ Put_Line (" duration =" & Duration'Image (Curr_Dur));
+ end Print_Statistic;
+
+ -----------
+ -- Stamp --
+ -----------
+
+ procedure Stamp is
+ begin
+ Time_Stamp := Ada.Calendar.Clock;
+ end Stamp;
+
+begin
+ Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+ loop
+ Generate_File;
+
+ for Level in ZLib.Compression_Level'Range loop
+
+ Ada.Text_IO.Put_Line ("Level ="
+ & ZLib.Compression_Level'Image (Level));
+
+ -- Test generic interface.
+ Open (File_In, In_File, In_File_Name);
+ Create (File_Out, Out_File, Z_File_Name);
+
+ Stamp;
+
+ -- Deflate using generic instantiation.
+
+ ZLib.Deflate_Init
+ (Filter => Filter,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Translate (Filter);
+ Print_Statistic ("Generic compress", ZLib.Total_Out (Filter));
+ ZLib.Close (Filter);
+
+ Close (File_In);
+ Close (File_Out);
+
+ Open (File_In, In_File, Z_File_Name);
+ Create (File_Out, Out_File, Out_File_Name);
+
+ Stamp;
+
+ -- Inflate using generic instantiation.
+
+ ZLib.Inflate_Init (Filter, Header => Header);
+
+ Translate (Filter);
+ Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter));
+
+ ZLib.Close (Filter);
+
+ Close (File_In);
+ Close (File_Out);
+
+ Compare_Files (In_File_Name, Out_File_Name);
+
+ -- Test stream interface.
+
+ -- Compress to the back stream.
+
+ Open (File_In, In_File, In_File_Name);
+ Create (File_Back, Out_File, Z_File_Name);
+
+ Stamp;
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.Out_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => True,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Copy_Streams
+ (Source => Stream (File_In).all,
+ Target => File_Z);
+
+ -- Flushing internal buffers to the back stream.
+
+ ZLib.Streams.Flush (File_Z, ZLib.Finish);
+
+ Print_Statistic ("Write compress",
+ ZLib.Streams.Write_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+
+ Close (File_In);
+ Close (File_Back);
+
+ -- Compare reading from original file and from
+ -- decompression stream.
+
+ Open (File_In, In_File, In_File_Name);
+ Open (File_Back, In_File, Z_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.In_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => True,
+ Header => Header);
+
+ Stamp;
+ Compare_Streams (Stream (File_In).all, File_Z);
+
+ Print_Statistic ("Read decompress",
+ ZLib.Streams.Read_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+ Close (File_In);
+ Close (File_Back);
+
+ -- Compress by reading from compression stream.
+
+ Open (File_Back, In_File, In_File_Name);
+ Create (File_Out, Out_File, Z_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.In_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => False,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Stamp;
+ Copy_Streams
+ (Source => File_Z,
+ Target => Stream (File_Out).all);
+
+ Print_Statistic ("Read compress",
+ ZLib.Streams.Read_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+
+ Close (File_Out);
+ Close (File_Back);
+
+ -- Decompress to decompression stream.
+
+ Open (File_In, In_File, Z_File_Name);
+ Create (File_Back, Out_File, Out_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.Out_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => False,
+ Header => Header);
+
+ Stamp;
+
+ Copy_Streams
+ (Source => Stream (File_In).all,
+ Target => File_Z);
+
+ Print_Statistic ("Write decompress",
+ ZLib.Streams.Write_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+ Close (File_In);
+ Close (File_Back);
+
+ Compare_Files (In_File_Name, Out_File_Name);
+ end loop;
+
+ Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok.");
+
+ exit when not Continuous;
+
+ File_Size := File_Size + 1;
+ end loop;
+end Test;

Added: vendor/zlib/current/contrib/ada/zlib-streams.adb
==============================================================================
--- (empty file)
+++ vendor/zlib/current/contrib/ada/zlib-streams.adb Sun Jun 15 19:11:06 2008
@@ -0,0 +1,225 @@
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
+
+with Ada.Unchecked_Deallocation;
+
+package body ZLib.Streams is
+
+ -----------
+ -- Close --
+ -----------
+
+ procedure Close (Stream : in out Stream_Type) is
+ procedure Free is new Ada.Unchecked_Deallocation
+ (Stream_Element_Array, Buffer_Access);
+ begin
+ if Stream.Mode = Out_Stream or Stream.Mode = Duplex then
+ -- We should flush the data written by the writer.
+
+ Flush (Stream, Finish);
+
+ Close (Stream.Writer);
+ end if;
+
+ if Stream.Mode = In_Stream or Stream.Mode = Duplex then
+ Close (Stream.Reader);
+ Free (Stream.Buffer);
+ end if;
+ end Close;
+
+ ------------
+ -- Create --
+ ------------
+
+ procedure Create
+ (Stream : out Stream_Type;
+ Mode : in Stream_Mode;
+ Back : in Stream_Access;
+ Back_Compressed : in Boolean;
+ Level : in Compression_Level := Default_Compression;
+ Strategy : in Strategy_Type := Default_Strategy;
+ Header : in Header_Type := Default;
+ Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size;
+ Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size)
+ is
+
+ subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size);
+
+ procedure Init_Filter
+ (Filter : in out Filter_Type;
+ Compress : in Boolean);
+
+ -----------------
+ -- Init_Filter --
+ -----------------
+
+ procedure Init_Filter
+ (Filter : in out Filter_Type;
+ Compress : in Boolean) is
+ begin
+ if Compress then
+ Deflate_Init
+ (Filter, Level, Strategy, Header => Header);
+ else
+ Inflate_Init (Filter, Header => Header);
+ end if;
+ end Init_Filter;
+
+ begin
+ Stream.Back := Back;
+ Stream.Mode := Mode;
+
+ if Mode = Out_Stream or Mode = Duplex then
+ Init_Filter (Stream.Writer, Back_Compressed);
+ Stream.Buffer_Size := Write_Buffer_Size;
+ else
+ Stream.Buffer_Size := 0;
+ end if;
+
+ if Mode = In_Stream or Mode = Duplex then
+ Init_Filter (Stream.Reader, not Back_Compressed);
+
+ Stream.Buffer := new Buffer_Subtype;
+ Stream.Rest_First := Stream.Buffer'Last + 1;
+ Stream.Rest_Last := Stream.Buffer'Last;
+ end if;
+ end Create;
+
+ -----------
+ -- Flush --
+ -----------
+
+ procedure Flush
+ (Stream : in out Stream_Type;
+ Mode : in Flush_Mode := Sync_Flush)
+ is
+ Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size);
+ Last : Stream_Element_Offset;
+ begin
+ loop
+ Flush (Stream.Writer, Buffer, Last, Mode);
+
+ Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last));
+
+ exit when Last < Buffer'Last;
+ end loop;
+ end Flush;
+
+ -------------
+ -- Is_Open --
+ -------------
+
+ function Is_Open (Stream : Stream_Type) return Boolean is
+ begin
+ return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+ end Is_Open;
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Stream : in out Stream_Type;
+ Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset)
+ is
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Ada.Streams.Read (Stream.Back.all, Item, Last);
+ end Read;
+
+ procedure Read is new ZLib.Read
+ (Read => Read,
+ Buffer => Stream.Buffer.all,
+ Rest_First => Stream.Rest_First,
+ Rest_Last => Stream.Rest_Last);
+
+ begin
+ Read (Stream.Reader, Item, Last);
+ end Read;
+
+ -------------------
+ -- Read_Total_In --
+ -------------------
+
+ function Read_Total_In (Stream : in Stream_Type) return Count is
+ begin
+ return Total_In (Stream.Reader);
+ end Read_Total_In;
+
+ --------------------
+ -- Read_Total_Out --
+ --------------------
+
+ function Read_Total_Out (Stream : in Stream_Type) return Count is
+ begin
+ return Total_Out (Stream.Reader);
+ end Read_Total_Out;
+
+ -----------
+ -- Write --
+ -----------
+
+ procedure Write
+ (Stream : in out Stream_Type;
+ Item : in Stream_Element_Array)
+ is
+
+ procedure Write (Item : in Stream_Element_Array);
+
+ -----------
+ -- Write --
+ -----------
+
+ p

==============================================================================
Diff truncated at 200k characters