Re: Cube IQ 4 0 Full Version
Tanja Freeze
The migration dialog text may be a little bit confusing, so let me first explain the message behind this warning pop up. In fact STM32CubeMX (same for STM32CubeIDE) detects if the project was created with an older version of the tool and if this is the case, it proposes the user to either migrate to use the latest STM32CubeMX database and STM32Cube firmware version, or to continue.
Basically the message says ;The project was created with a MCU database and FW package that is not present in your repository. It exists actually a newer MCU database and Cube software than the one you used.
You may select continue to use original firmware used at project creation and in this case it will downloaded into your repository as well as the MCU and IPs database (stm32cube_db), or you may select migrate, and in this case your project will be modified to fit the current database definition.
You can choose From Local ...?, then browse to select the zip file of the desired STM32Cube MCU package that has been previously downloaded. An integrity check is performed on the file to ensure that it is fully supported by STM32CubeMX.
I wonder if my post answers your question, if this this case, please click on the Select as Best button on my reply . This will help other members of the community find this solution more quickly
Adil, issue "sh version" which will give you the IOS version on the router, which is what most people go by, if you need to cross-reference that to CUBE version then I belive it is the same as CME version, which this matrix will provide:
I tried multiple firmware version, would be likely too long to list. I tried the past 2 weeks of August and first and last week of July build. Latest version I tried was: -08/2019-08-29-16:08/CubeOrange-heli/arducopter-heli.apj
I should have downloaded and started with a Beta/latest MP build from the get go as Windows 10 just stuck with the old driver Version 1.0.0.1 and never used the newer driver that installed minutes later.
MP has been uninstalled and reinstalled twice. Tried both the Current and Beta versions of MP. Removed and reinstalled the latest drivers several times. Going to pick up a Windows 10 lappy this afternoon and see if that makes a difference.
A shout out to @Matt.C as running driver clean, uninstalling the drivers and reinstalling them solved the problem on Win10. Evidently driver clean does not run (or appear to run) on Win7. On Win10 I had to click through numerous Windows security alerts for PnPUtil.exe. On Win7 - no response when clicked.
Im making a proyect where I need to have a 12x12 cube made out of smaller cubes and carve shapes on it by deleting some of the cubes its made out of and then next to it make another shape that is the carved shape but the way Im making it is buy caking pictures of the first one and then by looking at it carvig from scratch the second cube which is very tidious and time consuming, is there a way to get the negative version of my original cube without loosing the grid so I can still edit the individual small cubes?
image1366768 48.8 KB
this is what it currently looks like so you can get an idea of waht im trying to do.
The spectral-cube package provides an easy way to read, manipulate, analyze,and write data cubes with two positional dimensions and one spectral dimension,optionally with Stokes parameters. It provides the following main features:
The package centers around theSpectralCube class. In the followingsections, we look at how to read data into this class, manipulate spectralcubes, extract moment maps or subsets of spectral cubes, and write spectralcubes to files.
In the Cubes home page, you can see all existing Cubes and their main information: the table is sortable and searchable using the interactive header fields. You can also show or hide columns to your liking, by clicking the Column chooser button in the upper right corner of the table.
All versions of a Cube must contain the same data. This ensures that reports display consistent data regardless of the version used to create it. When data is loaded through a Data reader, the system automatically feeds all existing versions of the same Cube with said data, but when a new version is created and the Cube already contains some data, the new version must be aligned.
Aligning a version consists of feeding that version using data from another, more detailed version of the same Cube.
To verify versions alignment, click on the "VERIFY" button. The Checksum column shows the grand total value of each version, calculated by summing the values of all cells. A version is inconsistent (i.e. not aligned) when the indicated Checksum or percentage value differs from that of the primary version.
Board will export a file named after the Physical name of the Cube and the extracted version to the default extraction path (z:\). For example, clicking on the button in the image above would extract a file named "V0090001.csv".
You can change the Cube primary version from the "STRUCTURE" page in the properties panel. To do so, click on the circle next to the desired Entities to select them or to cycle through the available sparsity configuration settings (green-sparse, blue-dense or deselected). Click on "SAVE CHANGES" when done.
You can add one or more new versions to a Cube from the "VERSIONS" page in the properties panel. To do so, click on the "+" icon on the empty column next to the Cube structure, then click on the circle next to the desired Entities to select them or to cycle through the available sparsity configuration settings (green-sparse, blue-dense or deselected). Click on "SAVE CHANGES" when done.
See previous paragraph for more details.
Newly created versions contain no data, so you will have to use the Align function to feed the new versions: you can do so without leaving the current page by clicking on the Cube icon at the top of the versions to be aligned.
I don't seem to be able to dig this answer up on the internet. I'm wondering which (if any) console versions of Diablo 3, Reaper of Souls, have Kanai's cube. AFAIK, it doesn't exist on our ancient Xbox360 version. If we upgrade to the Xbox X (and presumably run the Xbox One version in backward compat?) will we have access to Kanai's?
It is not possible to acquire it. This is due to the fact that 360 and PS3 versions are limited to version 2.0.6 of the game. The Cube was added in patch 2.3 and other platforms are already on patch 2.6.7.
Exceptionally nice cube. I bought the art version just for the fun of it and didn't try out the app until a bit later. The app has everything you need from timers and stats to patterns you can do. The cube turns really smooth and quiet out the box. I've only recently gotten into speedcubing and although my go to is my MoYu Super RS3 M, this cube is quickly rising to the top as one of my favorites.
Equirectangular environment maps are internally converted to cube maps because only this format (and cubeUV) are supported by the shaders. The internal conversion process uses a cube render target with a fixed size computation:
Flipping between the two in browser tabs I think shows that the single equirectangular version is a bit more blurry. Sadly, I have to use a single image in the application I have in mind (user generated content) so reverting to the cube map option is not possible.
One solution is to compensate for this blur by pre-enhancing the image -which is a usual technique used in FM-radio (pre-emphasis), Dolby, etc whenever loss of high-frequency content occurs at the end device.
Starting with r161, WebGLRenderer will use a higher (double) cube map resolution for converting equirectangular environment maps. After a closer look, the previous cube map size was indeed too low which lead to undersampling during the conversion process. And that resulted in (slight) blurry output.
This is an awful bug in ListContourPlot3D that got into version 13.1 and should have been caught before release. This has been fixed in development builds, and the fix will be included in the next Mathematica release.
We loved our previous sadly deceased fridge and were hoping to reincarnate it. The fridge we ended up with was the same brand with exactly the same exterior dimensions as its predecessor with, oddly, a lot less interior space. We can only assume its walls have five inches of eco-excessive insulation.
Maybe other ice dispensers work better than this one. But now I keep a separate glass in our tiny useless freezer filled with ice cubes from which I can then take as many as I need. Sometimes you just have to admit defeat.
7fc3f7cf58