Hello all,
I have applied the N-mixture Pcount model for gibbon survey data using the count of groups heard
from 'listening posts' on 4 consecutive mornings at 30 different sites (one listening post in each of 30 consecutive grid cells of 4km2).
In order for each of my 'site' to be independent (e.g. no double counting of
groups between two sites), I have included only the groups counted that were
estimated to be located within 1 km-radius from the listening post (see map
bellow). So my 'site' is arbitrarily defined as 1km-radius around each of my listening
posts i.e. 3.14 km2 (so that I can then infer density estimate from my
abundance per site estimate).
I have used some site covariates (elevation, ruggedness, observer, distance to
main water source) and some survey covariates (temperature, humidity,
windspeed, date)
I have run 13 different models. Here is a table that shows the
results of all models:
|
model name |
λ |
±SE |
p |
±SE |
k |
AIC |
AIC Δ |
AIC wgt |
Cum wgt |
p Value |
|
λ(.)p(Wind+Temp) |
8.43 |
±1.97 |
0.27 |
±0.06 |
4 |
397.34 |
0.00 |
0.96 |
0.96 |
0.446 |
|
λ(distWater)p(Temp) |
7.74 |
±1.89 |
0.29 |
±0.07 |
4 |
404.66 |
7.33 |
0.03 |
0.99 |
0.119 |
|
λ(.)p(Temp) |
8.16 |
±1.92 |
0.28 |
±0.07 |
3 |
406.93 |
9.60 |
0.01 |
1.00 |
0.208 |
|
λ(distWater)p(Wind) |
5.29 |
±0.85 |
0.43 |
±0.06 |
4 |
409.19 |
11.85 |
0.00 |
1.00 |
0.347 |
|
λ(distWater)p(.) |
5.33 |
±0.89 |
0.43 |
±0.06 |
3 |
416.27 |
18.93 |
0.00 |
1.00 |
0.475 |
|
λ(.)p(Wind) |
5.34 |
±0.79 |
0.45 |
±0.06 |
3 |
416.83 |
19.49 |
0.00 |
1.00 |
0.297 |
|
λ(.)p(Rain) |
5.85 |
±1.02 |
0.40 |
±0.07 |
3 |
417.85 |
20.51 |
0.00 |
1.00 |
0.139 |
|
λ(.)p(Observer) |
6.32 |
±1.16 |
0.37 |
±0.06 |
3 |
419.60 |
22.27 |
0.00 |
1.00 |
0.277 |
|
λ(Rugged)p(.) |
5.37 |
±0.87 |
0.44 |
±0.06 |
3 |
420.70 |
23.36 |
0.00 |
1.00 |
0.248 |
|
λ(.)p(Humidity) |
5.42 |
±0.83 |
0.44 |
±0.06 |
3 |
420.91 |
23.58 |
0.00 |
1.00 |
0.228 |
|
λ(.)p(Elev) |
5.46 |
±0.83 |
0.44 |
±0.06 |
3 |
423.01 |
25.67 |
0.00 |
1.00 |
0.248 |
|
λ(.)p(.) |
5.39 |
±0.83 |
0.44 |
±0.06 |
2 |
423.52 |
26.18 |
0.00 |
1.00 |
0.079 |
|
λ(Elev)p(.) |
5.40 |
±0.84 |
0.44 |
±0.06 |
3 |
424.67 |
27.33 |
0.00 |
1.00 |
0.228 |
|
λ(.)p(Date) |
5.38 |
±0.82 |
0.45 |
±0.06 |
3 |
425.46 |
28.12 |
0.00 |
1.00 |
0.129 |
λ: abundance; p: probability of
detection; SE: standard error; k: number
of parameters estimated in the model; AIC: Alkaike Information Criterion = -2 (ln[maximum likelihood]) + 2 K; Δ AIC: best model’s AIC – AIC of model i; AIC wgt: weight of model i; cum wgt: cumulative
models’ AIC wgt; p Value: p value of the goodness of fit test, using the Χ2
statistic with 100 bootstraps, p>0.05 indicates no evidence of lack
of fit.
A few points I would like some feedback on:
1- What surprised me at first was the very low detection probability for the top
ranking model (p=0.27), although in the field we could hear gibbons (at
least one group, but mostly > one group) almost on any given day. Why would the probability of detection be so low?
2- The probability of detection between the different models varies quite a lot as well. Can the survey covariates used really influence that much estimates of p ?
(note that wind and temperature are actually known to influence gibbon call
frequencies)
3- There is a relatively high
variation in abundance (λ) estimates between the different models run. Does that make
sense to have very these different estimates (or at least between the top-ranked ones and the lowest-ranked ones) between the different models run?
This is the first time this method is applied to gibbons so it is very interesting to test its potential for these species; I would really appreciate any comments on the results.
Thank you very much for your help,
Camille.
--
You received this message because you are subscribed to the Google Groups "unmarked" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unmarked+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hi Camille and Andy,
what is the counting unit ? Do you count the groups or really individuals ? If the former, then p is for the group.
Regards --- Marc
...
<td width="67" nowrap valign="top" style="padding:0c