Nuby question. Now to boot from qbone

[Jay Cotton]

I started  ./rt11v5.5sj_dl1.sh -aw 18

I get lots of output but the pdp11/53 can't find the device.

During the boot process the cpu seems to be getting locked up.

I end up in this

KDJ11-D/S   E.04                                                                            
Non existent controller, address = 17774400                                                
                                                                                           
Commands are Help, Boot, List, Map, Test and Wrap.                                          
Type a command then press the RETURN key: BOOT DL0                                          
                                                                                           
                                                                                           
                                                                                           
                                                                                           
KDJ11-D/S   E.04                                                                            
Non existent controller, address = 17774400                                                
                                                                                           
Commands are Help, Boot, List, Map, Test and Wrap.                                          
Type a command then press the RETURN key: BOOT DL1                                          
                                                                                           
                                                                                           
                                                                                           
                                                                                           
KDJ11-D/S   E.04                                                                            
Non existent controller, address = 17774400                          

[Jay Cotton]

I figured out how to boot bsd.  So it looks like things are working.

jc

[pbi...@gmail.com]

Going to share your recipe with the rest of us :-}?

--
You received this message because you are subscribed to the Google Groups "UniBone" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unibone+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/unibone/67f05b9f-0be3-41ae-8035-b7b940157f37n%40googlegroups.com.

[Jay Cotton]

boards in chassis.

CPU (quad width)

ENET (dual width)

GRANT

QBONE

The thing I did to get it running was, Add the grant card start the emulator and wait for it to

finish.  Then power up the computer and hit reset.

 

The pdp 11/X3's seem to need certain settings.  I don't know what these settings are yet.

Things I can boot with the 11/53 are.

211BSD_du0_73.sh  -aw 22

rt11v5.5fb_dl0.sh  -aw 22

rsx11mp4.8_du0+rl_23_73.sh  -aw 22

xxdp2.5_dl1.sh  -aw 22

[Jay Cotton]

ops.

No grant card.  

jc

[pbi...@gmail.com]

THX.  What module is installed as “ENET”?

To view this discussion visit https://groups.google.com/d/msgid/unibone/c8441b75-bc7f-4303-93e2-19c7536a10dbn%40googlegroups.com.