UMDKv2 Developers

Finally managed to build GDB 11.1 with support for TUI, its not the best thing ever but its better

Thank you Chris, it worked, i opted for the second option, just calling the VblankInterrupt routine

Being able to make the changes I wanted, but I still haven't figured out why black screen when I

I'm interested if you can get another batch. On Sunday, November 3, 2019 at 6:29:58 AM UTC-5,

Furthermore, the thing to do to debug is to grab a trace at the point the SD card is being read, and

Awesome, thanks for the wiki. Le dimanche 9 juillet 2017 10:36:58 UTC+1, Chris McClelland a écrit : I

ah ok my bad, edited and working fine now! thanks for the help! Le samedi 8 juillet 2017 20:12:30 UTC

Hi Jeff, Can you confirm you're working with a Linux installation on real physical hardware, and

Hi Jeff, On 29/05/17 21:36, Jeff . wrote: Hey, I've only been able to just get around to setting

The additions listed by Chris M allowed the script to run without issue (on a VM) On Sunday, 14 May

Hello all, I am not sure if we have a UMDK hardware test-pool listed anywhere - if not I can host one

Please don't do that. Use the proper build process as described in the link I sent. If it doesn

On 17/04/17 19:40, Tasos Sahanidis wrote: I tried USB passthrough on virtualbox and I had ugly

The bank-switching is documented here: https://github.com/makestuff/umdkv2/wiki/Internals#ssf2-

I'll redo the sigtest on everything this weekend On Sunday, 26 March 2017 19:36:45 UTC+1,

At a guess: is this binary correctly aligned? Best thing would be to use the trace logging and then

That's right, a vblank of 0xFF0136 is not going to work. The gdb interrupt (ie what happens when

You will have no problems with Debian Jessie. On 19/03/17 20:38, Chris McClelland wrote: That's

Chris, I have got hold of KiCAD. I shall look into converting the 'Photocopy' to a Schematic

Minor clarification: the setup you saw was the Nexys2-based UMDKv2 prototype: http://www.makestuff.eu

SDRAM controller working; host can read and write blocks of data. Currently only 8MiB readback; full-

Chris, that'd be great. Which part of London are you in? Chris. On 13 September 2012 20:16, Chris

Hey guys, Apologies for the long silent period. And I just have time for a short reply. I saw the PCB

I've been busy buying components and doing the layout of the FPGA board. It's not finished

I finally discovered what the problem was. Luckily, Street Fighter 2 has a basic monitor program

That is a huge progress! I've made some tests with an oscilloscope that confirm the shortest

> Is it possible to leave /UDSW out of the signal list and rely only on /LDSW > to get low byte

In the above e-mails we talk about the SMD (Super Magic Drive). So here is a thread about it: http://

Guys, Chris: I would use Farnell, RS and Digikey over in Germany (although I rarely buy many

Thanks for your replies, I really appreciate it, especially on weekdays when you're short of time