Sequoia C512

157 views

Skip to first unread message

Hugo Hernandez

unread,

Feb 7, 2014, 3:47:10 PM2/7/14

to ultrasoun...@googlegroups.com

I wonder if someone can tell me how can I to connect my ultrasound to PAC server.

When I 'm creating a new network always appear sequoia 127.0.0.1 network host and SEQ56719 192.168.123.200 Hostname.

IP direction of my PAC is 192.168.31.100. So, I add Dicom server like PACS with IP direction before but connection always fail.

Any advice?

Jeff Majors

unread,

Mar 29, 2014, 1:45:41 PM3/29/14

to ultrasoun...@googlegroups.com

Please contact me at jeff.m...@gmail.com for the procedure if you still need it. Sounds like you need to install a router usually something like 192.168.1.1 or similar depending on your router located in the same building as the sequoia. You will also need to to define servers in the aegis menu located in the setup section (top row of keyboard).

Another gotcha in the process is you have to power cycle the system not reboot as most procedures indicate. Subnet mask is usually 255.255.255.0 but can vary.