SEQUOIA ULTRASOUND SYSTEM -- CHANGE DATE AND TIME
UltraSound
CHANGE DATE AND TIME
AT LAPTOP COMPUTER:
CONNECT NULL CABLE MODEM SERIAL COMM PORT FROM LAPTOP TO SERIAL RS232
PORT OF SEQUOIA ULTRASOUND MACHINE ( This case using USB 9 pin Male
Serial 9 pin Female Null Modem Cable – 25 pin Male
SETUP HYPER TERMINAL SESSION
Sequoia ultrasound system boot ( Message Below shows on Hyper Terminal
Session Screen )
RAM found: 64MB (bank0: 64MB bank1: 0MB SIMMid: 0xaf)
Found total of 64 Meg memory
Loading firmware ...
SSP Firmware (Boot Monitor Module)
Version: 2.16 [Built Oct 27 2005, 22:13:08]
Copyright (c) Siemens Medical Solutions 1996-2005.
Video Mode: NTSC
FPP version - sw: 0x44, hw: 0x0
Starting Power Up Tests...
SSP PUT Loader Version 2.0, Built Jun 1 2005, 20:30:13.
start_addr 0x1000 length 0x2f000
PUT Version 8.0
BIN_TARGET (s9.51_rel) built by -- Fri Oct 28 00:27:44 PDT 2005
1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.
21.22.23.24.
25.26.27.28.29.30.
PUT: Passed
RDP5(64M) PIC2 IOV2 BDM2(128M) MX3-GI No PVI CRT
Waiting for HD drive to be ready..
8 Total PUT failures
24 Apr 2007 19:57 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:07 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:09 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:35 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:39 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:39 GMT Failed test 30 "SCSI disk spin up"
24 Apr 2007 22:41 GMT Failed test 30 "SCSI disk spin up"
26 Jul 2007 19:00 GMT Failed test 30 "SCSI disk spin up"1996-2005.
DIMAQ Starting
Sequoia 9.51
0 0 2 0 0 3 0 0 0 0 16 0 0 0 4 480 0 PST+08:00 SEQ65131 192.168.1.101
GATEWAY 19
2.168.1.1 255.255.255.0 1
Dec 18 13:11:19 S0065I 20950 SEQ65131
Dec 18 13:11:19 S0030I 00741 741
Dec 18 13:11:19 S0026I 1168287 1168287:18:57
Dec 18 13:11:19 S0019I 00032
Dec 18 13:11:19 S0065I 20950 Sequoia "SEQ65131" is booting
Dec 18 13:11:19 S0030I 00741 System startup count
Dec 18 13:11:19 S0026I 99999 Total on-time 1168287:18:57 hours
Dec 18 13:11:19 S0019I 00032 Last shutdown user power-off
4 lines found in /etc/fstab
21.821160 /usr/sequoia/bin/rc.fast
RDP5(64M) PIC2 IOV2 BDM2(128M) MX3-GI No PVI CRT
ethernet amd0 ip 192.168.1.101 netmask 255.255.255.0
updating bbram...
1
Warning : No ACL file. Using global read/write access.
Dec 18 13:11:29 S0071I 00030 Alias S65131 is SEQ65131
38.793040 System Configuration check status 0 route add default
GATEWAY
add net default: gateway GATEWAY
bi
Display Software Starting
51.797840 fboot took 11.887560 Files 1 Size 0.002 mb
51.827280 fboot took 0.029440 Files 0 Size 0.000 mb
20061218-131150 51.873740 warn-default 0-108-1022
/view/s9.51_rel/vob/s/misc/telem/teloc/smems.c/159
Dec 18 13:11:50 U0091i 00039 V8.5 AGO Process Initialized
20061218-131150 51.994040 warn-default 0-108-2002
/view/s9.51_rel/vob/s/misc/telem/telpro/tp.c/97
20061218-131150 52.035320 error-default 0-104-1003
/view/unknownutils.c/931
gem (s9.51_rel) built by -- Fri Oct 28 00:31:44 PDT 2005 1) *
Using device "/dev/rel" for reliable transport
No fsckerr file
20061218-130550 763.537540 warn ssp-harmony-SEQ_E_UNCAUGHT
20061218-130550 763.568780 warn ssp-uisc-SEQ_E_UNCAUGHT
20061218-130550 763.598900 warn ssp-unknown_50-SEQ_E_UNCAUGHT
20061218-130600 773.794300 warn ssp-harmony-9991
20061218-131150 52.306240 info ssp-gem-1000
##### GEM starting up #####
20061218-131150 46.173200 warn smm-smm_init-999
/view/s9.51_rel/vob/s/smm/archival/src/sdmMgr/SDMDataSet.cc/570
20061218-131150 46.173200 warn smm-smm_init-999
SDM Transfer Tests Passed!!
The SDM subsystem appears to be functioning correctly.
20061218-131150 47.564860 warn acp-unknown_50-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/main/main.cc/95
20061218-131150 47.565800 warn acp-unknown_50-999
AcqSess (s9.51_rel) built by -- Thu Oct 27 22:50:29 PDT 2005
20061218-131150 51.873740 warn ssp-telpro-1022
/view/s9.51_rel/vob/s/misc/telem/teloc/smems.c/159
20061218-131150 51.873740 warn ssp-telpro-1022
can't get sensor shared memory(t10401,8192)
20061218-131150 51.994040 warn ssp-telpro-2002
/view/s9.51_rel/vob/s/misc/telem/telpro/tp.c/97
20061218-131150 51.994040 warn ssp-telpro-2002
tpValidate(0x0) bad traceId
20061218-131150 52.035320 error ssp-x_server-1003
/view/unknownutils.c/931
20061218-131150 52.035320 error ssp-x_server-1003
DEC-XTRAP: Vers. 3.3-0 successfully loaded
INFO: Monitor is CRT
Applications Starting
20061218-131200 62.724240 info-default 224-201-999
/view/s9.51_rel/vob/s/ui/uisc/UISC.cc/252
20061218-131200 62.726300 warn-default 224-201-999
/view/s9.51_rel/vob/s/ui/uisc/UISC.cc/487
20061218-131200 62.726300 warn ssp-uisc-999
/view/s9.51_rel/vob/s/ui/uisc/UISC.cc/487
20061218-131200 62.726300 warn ssp-uisc-999
UISC-main: Unable to stat UISC executable uisc.
UISC-main: This version of UISC was built <unknown>.
UISC-main: Current working directory: '/'.
UISC-main: Executable directory: '/'.
UISC-main: Lib
open X
20061218-131201 63.328480 warn acp-acquisition_session-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/coord/AcqSession.cc/969
20061218-131201 63.328480 warn acp-acquisition_session-999
--> xdcrIds (Aux/Right/Center/Left): 7 / 33 / ff / ff
ActiveIds (Right/Center/Left): c0000033 / ffff / ffff
mxStatus (Flag / Entry / Exit / Motor): 1 / 8 / 0 / 0
user name:aegisServer (s9.51_rel) built by -- Thu Oct 27 23:22:13 PDT
2005
20061218-131213 75.820340 info-default 0-225-999
/view/s9.51_rel/vob/s/aegis/src/server/CacheStudyDir.cc/1333
NOMAD: log created in /seqdata/log/nomad.log
NOMAD: no nomad.ini, setting default TRACE level to Error
MERGE_INI = /seqsys/dicom/merge.ini
NOMAD initilized, Persistent Callback Set and SCP Commands Registered;
AE = SEQ6
5131
1996-2005.
INFO: MX3 board detected - xdcr validity checking enabled
Report Application Starting
load calc database
INFO: IOV2 board detected
get ISM data
init ultrasound apps: SR, Aegis
20061218-131230 92.639540 warn acp-acquisition_session-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/coord/AcqSession.cc/1129
20061218-131230 92.639540 warn acp-acquisition_session-999
XdcrId = 51 connectorId = 2
20061218-131243 62.726300 warn ssp-uisc-999
rectory: '/usr/sequoia/lib/uisc'.
UISC-main: Userdata directory: '/seqdata/apps'.
UISC-main: System Type Lib directory: '/usr/sequoia/lib/uisc/gi'.
20061218-131243 105.013840 info-default 224-201-999
/view/s9.51_rel/vob/s/ui/uisc/CalcApplication.cc/656
20061218-131245 106.930560 warn ssp-uisc-999
/view/s9.51_rel/vob/s/ui/parameterEngine/pe_BehaviorEngine.cc/61
20061218-131245 106.930560 warn-default 224-201-999
/view/s9.51_rel/vob/s/ui/parameterEngine/pe_BehaviorEngine.cc/61
20061218-131245 106.930560 warn ssp-uisc-999
UISC-paramEngine: pe_BehaviorEngine::turnTheCrank loop counter: 300
20061218-131245 106.935500 UISC Live: B
20061218-131245 106.935500 warn-default 224-201-1000
Live: B
20061218-131245 107.077900 UISC Live: B
Setting capslock off
20061218-131245 107.077900 warn-default 224-201-1000
Live: B
20061218-131245 107.363820 info-default 224-201-999
/view/s9.51_rel/vob/s/ui/uisc/CalcApplication.cc/712
20061218-131245 107.732340 warn acp-acquisition_session-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/Bfm/MiscGainCN.cc/352
20061218-131245 107.732340 warn acp-acquisition_session-999
Got an unexpected user threshold offset from UISC.
20061218-131246 108.130020 warn acp-acquisition_session-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/Nodes/CalData.cc/192
20061218-131246 108.130020 warn acp-acquisition_session-999
CalData::opFreqData pointer is 0. Possible premature removal of xdcr.
20061218-131246 108.132180 warn acp-acquisition_session-999
/view/s9.51_rel/vob/s/acq/src/AcqSession/Nodes/CalibCN.cc/308
20061218-131246 108.132180 warn acp-acquisition_session-999
Xdcr Serial Number = 31029806
Imaging took 109 seconds
post_boot: starting clinical tool launch utility
20061218-131409 191.738920 info-default 224-201-999
/view/s9.51_rel/vob/s/ui/uisc/CalcApplication.cc/770
191.930720 fboot took 81.923920 Files 2 Size 0.369 mb
Dec 18 13:14:10 U0116i 00001 SDAO Process Initialized
Dec 18 13:14:14 S0072i 00073 free on device /seqdata 99
Dec 18 13:14:14 S0072i 00090 free on device /seqsys 97
Dec 18 13:14:14 S0072i 00073 free on device /seqdata 99
Dec 18 13:14:14 S0072i 00097 free on device /usr/sequoia/Aegis 100
ID CPU State Loading (ms)
4 vdb OK 5.200
5 gain OK 0.033
6 spectral OK 0.006
7 audio OK 0.006
8 color OK 0.578
9 iop OK 57.200
16 alp OK 0.044
Ping port 6 SAM SSMSG - Reply is 1. OK
Ping port 10 SAM - Reply is 1. OK
Ping port 11 ARCHIVAL CC - Reply is 1. OK
Ping port 14 SESSION TO CLIENT - Reply is 1. OK
Ping port 24 IMAGING SPEC MANAGER - Reply is 1. OK
Ping port 30 ARCHIVAL HI PRIO - Reply is 1. OK
Ping port 33 DISPLAY SETUP - Reply is 1. OK
Ping port 34 DISPLAY CONTROL - Reply is 1. OK
Ping port 35 DISPLAY PROBE - Reply is 1. OK
Ping port 42 FILE SERVER - Reply is 1. OK
Ping port 43 UISC EVENT - Reply is 1. OK
Ping port 44 UISC DISPLAY - Reply is 1. OK
Ping port 45 UISC DIAGNOSTIC - Reply is 1. OK
heartbeat: 13 of 13 ports answered the ping
memstats starting. First sample:
197.885680 post_boot complete.
post_boot exit status 0
AegisProc::timeBasedAutoRetry:Resuming the command queue, Queue Size
[0]
Mon Dec 18 13:14:16 PST 2006 i 10308+481888 k Free phys+virtual Used
42948
Dec 18 13:14:16 S0095i 10308 k Free Uisc 11812 Aegis 2512 DOMgr +
Hit Enter Key and type in user name and password
user name:rcsg
password: seq_service
----------------------------------------------------------
::::: ::::::: ::::: : : ::::::: ::: :
: : : : : : : : : : : :
: : : : : : : : : : :
::::: ::::: : : : : : : : : :
: : : : : : : : : : :::::::
: : : : : : : : : : : :
::::: ::::::: :::: : ::::: ::::::: ::: : :
***** ******* *
* * * **
* * * * *
****** ****** *
* *** * *
* * *** * * *
***** *** ***** *****
----------------------------------------------------------
^C Hit Ctrl C to Exit Image Mode
Control-C – exiting Enter Service Mode
SSP-SEQ65131 /usr/csg> date 200612181300.01 Change Date on Sequoia
2006 Dec 18 13h 00m 01s (yyymmddhhmm.ss)
SSP-SEQ65131 /usr/csg> exit Type exit to logout
logout
At SEQUOIA ULTRASOUND MACHINE:
Reboot the SEQUOIA ULTRASOUND MACHINE
Notify the Changed Date on top right hand corner of Monitor ( 18 Dec
06 )
Hit Setup Select Service UI from pull-down menu at Local
Maintenance Tools select Administration Click Access Service Level
Clicl OK
Enter User ID: A62668
Enter Access Key: Rue Fake Roam Hood Ban Lyra
Click OK at Premium Maintenance Tools select Configuration Click
OK Select System Configuration Click OK at the bottom System
Type: Select Shared Click OK Click Prior twice Click Feature
Control Verify All Features have been Added to the System
Exam Preset Restore -- on all Sequoia with difference version and
difference Serial are OK ( Sequoia v9.51 or v12.22 )