DM602 + PPPoA Authentication

[Martin Edwards]

I am based in Gibraltar where the local Telco offers only PPPoA ADSL. The
service requires authentication. The Telco has provided me with a fixed IP
address. I understand that the systems in use are all to UK standards.

I have a Netgear DM602 which I initially tried to use in its "Router Mode".
It seems to have problems forwarding (PPTP) VPN connection requests to the
VPN server sitting behind it when using either the Port forwarding facility
or the DMZ facility In addition, most VPN connection attempts (when they
eventually time out) seem to cause the router to stop working, and it
invariably requires a reboot!

The absolute ideal for me would be to use the device in "Modem" mode, but I
am not offered the chance to provide any logon credentials.

Does anybody know a way I can get around these problems? Is their a way via
the Telnet interface?

Regards

Martin Edwards

[Andrew]

In article <8c15a8757696ff69...@news.teranews.com>,
medw...@gibnynex.gi says...

Update the firmware, factory reset the router and reconfigure, when I had
similar VPN issues Netgear support told me that it MAY fix the VPN
issues.

Andrew

[Jim Watt]

"Martin Edwards" <medw...@gibnynex.gi> wrote in message news:<8c15a8757696ff69...@news.teranews.com>...

Buy a router from me which will work OK with a VPN, I might even
give you a decent trade in on your current unsuitable one.

If you wanted a plain modem you could have stuck with that 'free'
box they gave you with the line.

Jim Watt
Interactive Systems Ltd
http://www.gibnet.com/isl