Qualters and Smith
Mike Whittome
Qualters and Smith machine hacksaw from the skip. It is in very
restorable condition.
The plate on it tells me that 'Qualters and Smith Bros. Ltd.' resided in
Barnsley, and that the serial number of the saw is LDS 6 1257
A quick Google found a post code for what I take to be the factory at
BD19 5JU, but little else. There are a couple of pictures on Google
Images.
Can any kind soul point me to further information - please.
Mike
--
Mike Whittome
Christopher Tidy
That's a very exciting find. These are good machines and, looked after,
will last pretty much forever. I wish I lived near skips like that!
The serial number breaks down into three parts. "LDS" means "light duty
saw". "6" is the cutting capacity of the machine, which in this case is
6 inch diameter round stock. "1257" is the machine number. I have the
heavy duty 8 inch version which carries the number "HDS 8 2505".
Qualters & Smith were bought out by Birkett Cutmaster. Their contact
details are as follows:
Birkett Cutmaster Ltd
PO Box 30
Cleckheaton
West Yorkshire
BD19 3BL
Tel. 01274 870311
Fax. 01274 862754
They do keep a very limited range of spares for these machines. I
bought the two blocks which clamp the blade from them a few years ago.
If you call them, David Moorhouse is a helpful and knowledgeable person
to speak to.
If I can be of any help, let me know. Good luck with the project!
Best wishes,
Chris Tidy
Christopher Tidy
manual for my saw, free of charge. They might have the manual for your
saw, if you're lucky. If you have problems getting a manual I can make
a copy of mine for you.
Chris
Mike Whittome
Very many thanks for all that information, most kind.
Mike
--
Mike Whittome
Christopher Tidy
> Chris
>
> Very many thanks for all that information, most kind.
>
> Mike
No problem. Good luck with the restoration. Let me know how it works
out.
Best wishes,
Chris
marshd20
We have at our model engineering club a Qualters and Smith 6" Power
Hacksaw. Does anyone have a service manual for it which I could copy or
purchase?
DennisM
--
marshd20
-------------------------------------------------------------------------------
marshd20's Profile: http://www.rcgroups.com/forums/member.php?u=454677
View this thread: http://www.rcgroups.com/forums/showthread.php?t=468844
mick
> Hacksaw. Does anyone have a service manual for it which I could copy or
> purchase?
>
> DennisM
http://bbs.homeshopmachinist.net/threads/49589-Power-Hacksaw-Lift-Mechanism
--
mick
Fran duffy
Hi Chris I have a qualters and smith bandsaw model 10b would you have a manual
or any info thanks fran
--
for full context, visit https://www.polytechforum.com/modelengineering/qualters-and-smith-30874-.htm
Clifford Coggin
> replying to Christopher Tidy, Fran duffy wrote:
> Hi Chris I have a qualters and smith bandsaw model 10b would you have a
> manual
> or any info thanks fran
>
--
Clifford Coggin
Kent
England
