Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

flame guns

282 views
Skip to first unread message

brian mitchell

unread,
May 11, 2009, 8:09:02 PM5/11/09
to
Does anyone here use one?
I have a longish circular driveway and quite a lot of paths to weed and
am thinking of getting one because I seem to spend a small fortune on
chemical weedkiller and find it isn't all that effective.
I'm thinking of a paraffin one and of those the Sheen X300 seems to have
a monopoly. �150 seems a tad expensive for a glorified blowtorch but I
imagine the operating costs would be less than gas.
But how effective are they? How difficult to operate, to light and keep
alight, and so on? I'd appreciate hearing the word of experience!

brian mitchell

Pam Moore

unread,
May 12, 2009, 6:31:20 AM5/12/09
to

I've never used one, but have heard that such things kill off the
topgrowth but not the roots and you have to keep re-doing it.
A glyphosate based weedkiller will kill off the whole plant and give a
longer-lasting effect.

Pam in Bristol

Kate Morgan

unread,
May 12, 2009, 7:05:14 AM5/12/09
to

We have a long drive and I use a flame gun to keep it tidy, My husband
reckons it is an expensive way to do the job but it does seem to work for
me. We buy the gas cans from Axminster Tools I do not know what make the
flame gun is as we have had it for quite a number of years. I choose a day
when there is no wind and as I said it works for me, hope that helps a bit
:-)

kate

alan.holmes

unread,
May 12, 2009, 7:24:58 AM5/12/09
to

"brian mitchell" <brai...@fishing.net> wrote in message
news:3130303030363...@fishing.net...

I have used one and found it useless, it doesn't kill the weeds right off,
merely destroys the top growth, but the roots just keep going forever.

A good quality weed killer will be far more effective.

Don't waste your money on a flame gun.


>
> brian mitchell


Message has been deleted

Dave Liquorice

unread,
May 12, 2009, 4:42:27 PM5/12/09
to
On Tue, 12 May 2009 18:30:00 +0100, Janet Baraclough wrote:

> Paraffin isn't cheap, but the flamegun is cheaper than weedkiller.

Not cheap from a garden center but talk nicely to some one with oil
heating. Last lot I bought was 28.4p/l + 5% VAT. That was February mind,
so it's probably a few pence more now. But all the same a couple of quid
or pint down the pub should get you 5l...

As for a flame guns excellent devices and very effective, use as Janet
says and you won't go far wrong. Being too impatient after lighting the
meths(*) to warm the burner to get the fuel vaporised is the common
mistake leading to jets of burning liquid paraffin.

(*) I assume it uses meths It'll need some preheating no matter, just give
it plenty of time to get hot before trying to light it.

--
Cheers
Dave.

jbm

unread,
May 12, 2009, 7:26:44 PM5/12/09
to

"brian mitchell" <brai...@fishing.net> wrote in message
news:3130303030363...@fishing.net...
| Does anyone here use one?
|
| brian mitchell

I hear they work very effectively against squirrels! And the little critters
come out ready cooked. What more could you ask for?

jim, Northampton


Muddymike

unread,
May 13, 2009, 4:00:39 AM5/13/09
to

"Janet Baraclough" <janet.a...@zetnet.co.uk> wrote in message
news:3130303039303...@zetnet.co.uk...
> The message <3130303030363...@fishing.net>
> from brian mitchell <brai...@fishing.net> contains these words:
> Just a few tips from experience. Don't do it on a windy day (because
> gusts will blow out the flame).
> Have matches in your pocket so if it does blow out you can quickly
> re-ignite the vapour.
> . Don't point it anywhere near desirable plants, plastic drainpipes and
> dustbins, the parked car, french windows etc; the forward heat flash
> extends further than you think.
> Light it with the business end pointing away from any breeze and
> with 3 or 4 empty metres of ground ahead of it;
> so if/when while adjusting the burner, you inadvertently get the
> flamethrower effect, it won't matter.

>
> Paraffin isn't cheap, but the flamegun is cheaper than weedkiller.
>
I use one and run it on diesel, cheaper these days than paraffin, easier to
find, and the flame gun doesn't seem to mind.

Mike


Message has been deleted

Charlie Pridham

unread,
May 13, 2009, 6:10:21 AM5/13/09
to
In article <3130303039303...@zetnet.co.uk>,
janet.a...@zetnet.co.uk says...

> The message <3130303030363...@fishing.net>
> from brian mitchell <brai...@fishing.net> contains these words:
>
> I'd recommend getting one secondhand (if you can find anyone willing
> to part with one) as they are very tough,
> and you can buy spare parts from Sheen.
> I bought an ex-hire X300 for £15 over 20 years ago, and use it on
> the drive and parking space. In all that time only the jet nozzle has
> needed replacing (easy DIY)
>
> If you know how to use an old fashioned primus stove then its the
> same principle and easy to light and use.
> As for how effective it it is at weed control; very, if you follow
> the user instructions. ( Only a swift scorch is required to turn
> topgrowth brighter green
> as cells burst. Within days it will be dry and brown. A second pass of
> the flamegun turns all to ash ). Most people make the mistake of trying
> to incinerate all
> first time.
>
> Just a few tips from experience. Don't do it on a windy day (because
> gusts will blow out the flame).
> Have matches in your pocket so if it does blow out you can quickly
> re-ignite the vapour.
> . Don't point it anywhere near desirable plants, plastic drainpipes and
> dustbins, the parked car, french windows etc; the forward heat flash
> extends further than you think.
> Light it with the business end pointing away from any breeze and
> with 3 or 4 empty metres of ground ahead of it;
> so if/when while adjusting the burner, you inadvertently get the
> flamethrower effect, it won't matter.
>
> Paraffin isn't cheap, but the flamegun is cheaper than weedkiller.
>
> Janet.
>
Janet, do you find it ok on all hard surfaces? I have been using Path
Clear for years on gravel chippings but that seems to have been
withdrawn, just how close to a flower bed edge can you safely go? and I
also have a very old tarmac drive with large stones (ie not the smooth
fine sort) and that grows weeds for a past time but I am concerned at how
hot the ground itself is likely to get, from your description of correct
usage it sounds as if you can kill the top growth with a quick pass over.
and I also have a lot of brick paver type paths (they are made from
concrete) and welsh poppies seem to like the cracks!! so being able to
singe them off sounds ideal :~)
--
Charlie Pridham, Gardening in Cornwall
www.roselandhouse.co.uk
Holders of national collections of Clematis viticella cultivars and
Lapageria rosea
Message has been deleted
Message has been deleted

Bobbie

unread,
May 13, 2009, 8:58:33 AM5/13/09
to
Janet Baraclough wrote:
> The message <3130303030363...@fishing.net>
> from brian mitchell <brai...@fishing.net> contains these words:
>

Janet, are they easy to handle? Do they require a lot of strength for
instance. There are several mechanical devices that I now find quite
bothersome, but I like the idea of this gun since I don't use chemicals
of any kind in this garden because of the animals.

Bobbie

Message has been deleted

Dave Liquorice

unread,
May 13, 2009, 10:27:47 AM5/13/09
to
On Wed, 13 May 2009 09:00:39 +0100, Muddymike wrote:

> I use one and run it on diesel, cheaper these days than paraffin, easier
> to find, and the flame gun doesn't seem to mind.

I was going to query diesel cheaper than paraffin but did a quick bit of
maths. Tesco road diesel, today, 100.9p/l = £5.05 for a metric gallon
(5l). A quick google gave £5.67 or £6.49 for 4l... Flippin 'eck, road
diesel has 62 odd p/l of duty and VAT on it that paraffin won't.

Heating oil is around 32p/l ATM.

--
Cheers
Dave.

Dave Liquorice

unread,
May 13, 2009, 10:13:40 AM5/13/09
to
On Wed, 13 May 2009 13:42:50 +0100, Janet Baraclough wrote:

> Heating oil is kerosene ; have you actually used that in a Sheengun?

Broadly speaking:

Domestic heating oil = kerosene = paraffin = Jet A1 = a "28 sec" oil.

Road Diesel = White Diesel = Red Diesel = Gas Oil = a "35 sec" oil.

I don't have a sheen gun but would run it on 28 sec heating oil without a
second throught.

--
Cheers
Dave.

Message has been deleted
Message has been deleted
Message has been deleted

Bob Minchin

unread,
May 13, 2009, 2:22:30 PM5/13/09
to
Janet Baraclough wrote:
> The message <nyyfbegfubjuvyypb...@srv1.howhill.net>
> from "Dave Liquorice" <allsortsn...@howhill.com> contains these words:

>
>> On Wed, 13 May 2009 13:42:50 +0100, Janet Baraclough wrote:
>
>>> Heating oil is kerosene ; have you actually used that in a Sheengun?
>
>> Broadly speaking:
>
>> Domestic heating oil = kerosene = paraffin = Jet A1 = a "28 sec" oil.
>
>> Road Diesel = White Diesel = Red Diesel = Gas Oil = a "35 sec" oil.
>
> Thanks. John has just said the same; I'd never heard of sec oil and
> asked him what it is; he got that strange "women are from Venus"
> look in his eye, again.
>
>> I don't have a sheen gun but would run it on 28 sec heating oil without a
>> second throught.
>
> I'm going to, now I know I won't accidentally blow up Hunterston B.
>
> Janet.
Janet,

28 sec refers to the viscosity of the liquid. It is the time taken for a
given volume to run through a standard size hole at a specific temperature.
How this help you get a little nearer the Martians!

Bob

Dave Liquorice

unread,
May 13, 2009, 3:06:22 PM5/13/09
to
On Wed, 13 May 2009 18:15:46 +0100, Janet Baraclough wrote:

> I'd never heard of sec oil and asked him what it is; he got that
> strange "women are from Venus" look in his eye, again.

Did he tell you? Or is that a coded response of "it's bleedin' obvious
woman, go and look it up ('cause I don't know either but I ain't lettin'
on that I don't know)".

--
Cheers
Dave.

0 new messages