Stuart Turner P6
Ian
I have just collected a car bootfull of parts which I am told will make a
Stuart Turner P6 (5HP @ 1650 rpm - s/n D12A286). It has a marine gearbox
and some extraordinary pipework for the exhaust system, so it has obviously
come out of a boat. Among the parts were a small ignition coil and a
"Dynastart" dynamo/starter motor. Unfortunately all the control wiring has
been cut through and discarded. Can one of you point me in the right
direction of where I can get a manual / drawings.
Many thanks.
John Ambler
<i...@porterhouse.demon.co.uk> writes
Stationary Engine magazine Help Line contact for Stuart engines. Keith
is very helpful, and can point you in the direction of the commercial
organisation who currently hold the Stuart sales records for dating
purposes. Keith himself has copies of instruction books / parts lists,
and will photocopy these for you. If you are a SEM subscriber, Keith's
address can be found in the Help Line column - please quote your
subscription number when writing - I sent an SAE, but Keith had to put a
Guernsey stamp on to return information to me as their post office is
now privatised and UK stamps are not accepted - some other way of
reimbursing his costs is recommended (UK cash is ok), though he says he
does it for love not money.
If you are not an SEM subscriber - why not? Its a great read !
--
John Ambler
Somewhere in the middle of a forest in Sussex (UK) ........
Andy Mabbett
<jo...@hawkhurst.demon.co.uk> writes
>I sent an SAE, but Keith had to put a
>Guernsey stamp on to return information to me as their post office is
>now privatised and UK stamps are not accepted - some other way of
>reimbursing his costs is recommended (UK cash is ok)
You could buy Guernsey stamps from a philatelists, or an International
Reply Coupon, which can be exchanged in Guernsey, or anywhere else in
the world, for return postage to the UK.
--
Andy Mabbett, Development Manager, Birmingham Assist
Birmingham City Council - http://www.birmingham.gov.uk
!*!*!*! See our *new* web site, at the above address !*!*!*!
Ian
Mr J Brennan
read my writing for their address - either Malden or Walden,Essex,
CM9 7HU tel 01621 852866. Marine engine mag had an article about
stuart engines a while back - you could contact Patrick Knight
who is the editor of Marine Engine Mag on 01252 317327
WHere are you?.
Regards
John
In article <908020144.4491.0...@news.demon.co.uk>,
"Ian" <i...@porterhouse.demon.co.uk> writes:
>Hello everybody.
>
>I have just collected a car bootfull of parts which I am told will make a
>Stuart Turner P6 (5HP @ 1650 rpm - s/n D12A286). It has a marine gearbox
>and some extraordinary pipework for the exhaust system, so it has obviously
>come out of a boat. Among the parts were a small ignition coil and a
>"Dynastart" dynamo/starter motor. Unfortunately all the control wiring has
>been cut through and discarded. Can one of you point me in the right
>direction of where I can get a manual / drawings.
>
>Many thanks.
>
>Ian - i...@porterhouse.demon.co.uk
>
>
--
John Brennan University of Warwick, Coventry CV4 7AL,UK
Tel +44 1203 523973 Fax +44 1203 524144 Email es...@warwick.ac.uk
Ian
>Fairways Marine will sell you a manual they are in Essex, and I can't
>read my writing for their address......
It' s Bath Place Wharf, Downs Road, Maldon, Essex, CM9 7HU
>WHere are you?
Would you believe about 15 miles from Maldon!
Regards,
Ian
COOPGC
drawings of most Stuart engines.
COOPGC
Fax 01621 850902