New to the group but defiantly not new to Piercing. Found you lot from a
link from the Wildcat site.
One of my Piercings is a Prince Albert stretched to 6mm.
Wildcat do a Princes Wand. Just after some experiences really.
Thanx,
Ade in Southampton
Haven't a clue about a wand, other than I covet one but by handfasted
would go ballistic :( .
Just wanted to say welcome!!
Blessed Be
Micquael
[whose poncey spelling of michael fools speech synths -- apologies]
Adrian Law <al...@mrc.soton.ac.uk> wrote in message
news:01bfc74b$8c5f6580$345e...@Helene.soton.ac.uk...
> Hi All,
>
> New to the group but defiantly not new to Piercing. Found you lot from a
> link from the Wildcat site.
>
> One of my Piercings is a Prince Albert stretched to 6mm.
>
> Wildcat do a Princes Wand. Just after some experiences really.
>
> Thanx,
>
> Ade in Southampton
Will email you some info.
Dave.
cheers
Sean aka Learning_fast
Other than that it feels a bit strange sometimes when you pee because you
get a resonance (turbulent flow) and some types of tight underware can be
uncomfortable. I find I wear mine for a few days at a time. It also has a
tendency to hold liquid after you piss
Good luck
Doug
Adrian Law wrote in message
<01bfc74b$8c5f6580$345e...@Helene.soton.ac.uk>...
You need a lot of dimensions. Total length, diameter, length & diameter
of the stem at the end and at the side, distance from the end for the
side stem, size of balls etc at the end of the stem.....
Well, make sure its not too long, and not too great a dimension. Bear in
mind the wand is straight, and you may well not be. You might want to
try an insertion rod at the proposed diameter to get the length right.
Err on the shorter side. Choose the lengths of the stem for the end ball
to give you some leeway for holding the wand in place whilst you screw
in the side stem. In other words err on the long side, you need to be
able to hold the ball comfortably when the wand is in place.
The side stem can be difficult to locate and screw in place, and there
is a good chance you will catch skin and trap it in the thread, which is
a bit unpleasant. So you might want to consider a smaller gauge side
stem than your PA is. The bigger the side stem the bigger the screw
thread at the end, and the less room there is going to be to cut it in
the body of the wand.
Needs a bit of careful thought and a lot of consideration when fitting.
--
David