Sky remote codes for Panasonic TX32PF10 TV

[Greg Hilton]

I've just ordered the Panny TX32PF10, and was wondering if the standard Sky
remote codes in the manual work, or wether you need any special ones.

Any info including the code people used much appreciated
--
Greg Hilton
greg dot hilton@compaq dot com

[John]

Hi Greg
I have a 32PF10 but the sky remote does not operate all of the Tv functions.
Ch2,3 do not work as well as the ch up/down.

John

Greg Hilton <m...@work.com> wrote in message
news:85c5is$2...@usenet.pa.dec.com...

[Brian McIlwrath]

In uk.media.tv.sky John <Jo...@drvr.freeserve.co.uk> wrote:
: I have a 32PF10 but the sky remote does not operate all of the Tv functions.

: Ch2,3 do not work as well as the ch up/down.

You are using the WRONG one of the selection (of about 9!) Panasonic codes
then! Start with the 4 digit product code (0051?) you come to a code which
partially works first. Try 268 (this is from memory).

[David Woods]

I did it like this (more or less--it's late/early!)

Press TV

hold down red and select until the two flashes from the LED

press 678

press power
voila

Brian McIlwrath wrote in message <85etv9$i...@newton.cc.rl.ac.uk>...

[John]

I still have'nt managed to get it working with my 32PF10
JOhn

David Woods <david....@virgin.net> wrote in message
news:868r8d$f30$1...@nclient15-gui.server.virgin.net...

[David Woods]

I just tried it again and this sequence works for me with my 32PF10.
Looking at the reply previous to mine you may be entering a leading
zero before 678. The sequence tv, red+select requires a three digit code.
Are you getting the two flashes at step 2? If the code is accepted there's
two flashes after it as well. I think pressing power is mandatory too.

I don't think it should make any difference, but mine is a Pace digibox.

Good luck,

Dave

John wrote in message <86aiuh$ufd$1...@news6.svr.pol.co.uk>...