Tacwise 500EL Electric Nailer, any good?
Seri
the manual way is not filling me with joy so I was thinking of getting
an electric nailer. I would dearly love a compressor one but storage
for the compressor would be an issue, plus noise, lugging it into the
loft etc etc.
So, I was wondering if anyone knew if this nailer was any good:
http://www.screwfix.com/prods/40138/Power-Tools/Nailers-Staplers/Tacwise-500EL-Pro-Electric-Nailer
and if it was worth the extra 35 quid over this one:
http://www.screwfix.com/prods/98804/Power-Tools/Nailers-Staplers/Tacwise-181EL-35-35mm-Nailer-Stapler
Thanks for any comments/advice
Seri
Rod
I think the cheapie one is very similar to the one I have. For flooring?
I wouldn't have thought it was up to the job. If nothing else, the brads
are just too wimpy. Tacking things together? It's fine.
I have no idea about the expensive one.
--
Rod
Hypothyroidism is a seriously debilitating condition with an insidious
onset.
Although common it frequently goes undiagnosed.
<www.thyromind.info> <www.thyroiduk.org> <www.altsupportthyroid.org>
d...@gglz.com
secure floorboards.
A Paslode IM350 using 2.8mm * 60mm nails (or 3 times the thickness of
your board) would be a common tool for through-nailing floorboards.
The Medway Handyman
I have the 191 model and its a good tool for pinning backs on flatpack or
stapling down 3mm hardboard, but 18 guage brads are no good for flooring.
Compressor could be left away from the work area & longer hoses used, but
you would need to go to much bigger nails - different ball game.
You mentioned the loft - is the flooring just chipboard loft panels or
decorative?
--
Dave - The Medway Handyman
www.medwayhandyman.co.uk
Seri
I have to say, once again, a thanks to uk.d-i-y, if nothing else, the
answers allowed me to set my expectations low enough to avoid
disappointment.
That said, I did purchase said item, and it's surprisingly blooming
good. Securing loft chipboard to joists with the 40mm brads was a
breeze. Securing the solid oak flooring to the new chipboard, perfect
(I did nail along the tongue at a 45 degree angle in the tongue and
groove so it wasn't full depth). Just thought I'd say thanks and share
my thoughts on the item after 6 hours use.
Oh, it also secured some skirting straight into brick without a
problem. The only issue with the thing is that I'm now wandering round
the house looking for things to nail...
Cheers once again.
Seri
Steve Firth
> I have a ton of wood flooring to put down and the through of doing it
> the manual way is not filling me with joy so I was thinking of getting
> an electric nailer. I would dearly love a compressor one but storage
> for the compressor would be an issue, plus noise, lugging it into the
> loft etc etc.
>
> So, I was wondering if anyone knew if this nailer was any good:
> http://www.screwfix.com/prods/40138/Power-Tools/Nailers-Staplers/Tacwise-5
> 00EL-Pro-Electric-Nailer
I have one of the Tacwise nailers, it's very good for the purpose for
which it was designed. It's not designed to secure floorboars and that
would be an inappropriate use of the nailer. If you want to make
lightweight doors, fix thin ply over a frame or knock up picture frames
it's good enough and reliable.
I have a small T-head air nailer equivalent to the Tacwise for light
work. For the heavy work I use a compressor and a framing nail gun
capable of firing round head nails up to 4mm. The compressor that I use
is a NuAir luggable unit which has a pocket at the back to store a nail
gun, spares and hoses. It's quiet enough to use inside and easier than
running my diesel far compressor outside then runnign long airlines into
the house.