Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Dulux Satinwood - Durability

267 views
Skip to first unread message

TheScullster

unread,
Aug 24, 2009, 8:34:44 AM8/24/09
to
Hi all

Quick paint question..

I have used the water based quick dry satinwood for a while on doors,
architraves etc., but find it a bit "soft" for the high traffic stuff.
Has anyone used the oil based satinwood to be able to compare to gloss?
Dulux claim the satinwood is just as durable/hard wearing as gloss, but I
would appreciate some real user feedback/confirmation as I am considering
using it for newel posts/handrailing.


TIA

Phil


John

unread,
Aug 24, 2009, 2:21:49 PM8/24/09
to

"TheScullster" <ph...@dropthespam.com> wrote in message
news:x_6dnXX3v8aeFA_X...@eclipse.net.uk...

My lounge doors (double) are in oil based satinwood. (Frame in gloss) I
really like it - I take care when cleaning dirty marks off not to rub it
though - in case I make it shine. Just gentle wipe after spraying a cleaner
onto it. No concerns about durability.


neverwas

unread,
Aug 25, 2009, 3:24:52 AM8/25/09
to
> I have used the water based quick dry satinwood for a while on doors,
> architraves etc., but find it a bit "soft" for the high traffic stuff.

Is it the water based Trade Diamond Satinwood you have been using? I
ask as that seems really quite hard wearing in my limited experience.
(It also felt pretty hard when I had to sand it due to my useless
brushwork.)
--
R


TheScullster

unread,
Aug 25, 2009, 3:24:49 AM8/25/09
to

"John" wrote

>
> My lounge doors (double) are in oil based satinwood. (Frame in gloss) I
> really like it - I take care when cleaning dirty marks off not to rub it
> though - in case I make it shine. Just gentle wipe after spraying a
> cleaner onto it. No concerns about durability.
>

Thanks John

My other concern about oil based is the yellowing over time. One reason I
am using predominantly acrylic paint is the colour-fastness.
I'll try the bannister in oil based and see how it wears.

Phil


TheScullster

unread,
Aug 25, 2009, 3:48:07 AM8/25/09
to

"neverwas" wrote

> Is it the water based Trade Diamond Satinwood you have been using? I ask
> as that seems really quite hard wearing in my limited experience. (It also
> felt pretty hard when I had to sand it due to my useless brushwork.)
> --
> R

Thanks R

No I have been using the shed supplied standard quick dry stuff shown here
http://www.dulux.co.uk/products/info/quick_dry_satinwood.jsp
Hadn't seen your diamond version - will give that a try instead

Phil


Dave Starling

unread,
Aug 25, 2009, 5:45:34 AM8/25/09
to
On Aug 25, 8:48 am, "TheScullster" <p...@dropthespam.com> wrote:
> No I have been using the shed supplied standard quick dry stuff shown herehttp://www.dulux.co.uk/products/info/quick_dry_satinwood.jsp

> Hadn't seen your diamond version - will give that a try instead

Hi Phil, Sounds like you are going with Satinwood, but another
suggestion to try would be Dulux Eggshell. Its a very low sheen, very
matt. I always used high gloss finish but a decorator put me onto this
finish. Its much easier to work with and I now prefer the finish. Its
a less forgiving of small scratches than gloss and can easily be
touched up unlike gloss.

With bannisters and other high wear areas I don't think you can avoid
repainting every couple of years. :(

Dave.

Jan Wysocki

unread,
Aug 27, 2009, 8:42:14 PM8/27/09
to

In my experience, Dulux Satinwood is much harder wearing than their gloss
paints. However, I have no experience of using Satinwood outdoors,
although I am considering covering some uPVC window frames with it.
Comments welcomed and yes, I will replace them with wood when I
can afford it:)

I'm just renewing (carefull wet rub down with wet "wet or dry" 400 grit)
some 20 year old Satinwood. There are a few chips, but the main reason
is that the colour isn't as vibrant.

The original was oil based and I'm replacing it with oil based - it's
still available either as "Trade" or as Dulux colour mixer paints.
IIRC Dulux is phasing out oil based satinwood next year, so stock up now!

I have an open mind over the durability of water based
gloss/satinwood/eggshell, but I do know that it's _much_ easier to get
a good finish with the oil based paints, presumably because they "self
level" much better than water based paints. Mind you it's swings and
round abouts, because you don't need to wait as long before you can rub
down water based paints. Nonetheless I haven't got 'round to trying to
get really smooth finishes with water based paints yet, because it's so
easy to get a smooth finish with oil based paints.

Dulux aren't the only supplier of "satinwood" paints, Farrow & Ball
certainly do them, so I guess that Leyland, Johnstones, Crown, Sandersons,
English Heritage et al will also do them.

Nowadays, there seem to be less colours in the Dulux Stainwood range that
require an undercoat. I don't know if that's really true or whether
they've just given in to the great unwashed's inability to do anything
carefully.

--
Jan

0 new messages