Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Nails for air nailer - sources?

46 views
Skip to first unread message

Ziggy

unread,
May 6, 2004, 12:05:38 PM5/6/04
to
Axminster sell a 13g masonry nailer and sell 13g masonry nails for
this. Is it possible to stick nails in this nailer for use in fixing
wood to wood and if so, does any place sell 13g wood nails?

TIA

Andy Hall

unread,
May 6, 2004, 2:39:45 PM5/6/04
to
On Thu, 06 May 2004 17:05:38 +0100, Ziggy <No-...@nowhere.notime>
wrote:


Try www.topgun.co.uk

Give them a call. I fthey don't have, they will be able to get them
almost certainly.

Expect to buy 1000 though.


.andy

To email, substitute .nospam with .gl

Steven Briggs

unread,
May 6, 2004, 3:59:05 PM5/6/04
to
In message <9cok90hqutu7a8cfj...@4ax.com>, Ziggy
<No-...@nowhere.notime> writes

Good question, I'm thinking of getting said nailer and would like to
know.
I suspect it takes standard "T" nails, as per the Screwfix catalogue.
Maybe also "maxi-brads", as these all _seem_ compatible with each other.

Does anyone know is there are generic standards for air nailer nails?


--
Steve

Andy Hall

unread,
May 6, 2004, 4:37:30 PM5/6/04
to

Generally there are - 22ga, 18, 16, 15. In various lengths.

There are others used in framing and roofing nailers.

This should apply to anything based on U.S. designs.

One good source of information is www.senco.com - they also make among
the best nailers, along with Porter Cable.

For a UK supplier, I have used Top Gun in Blackpool quite a bit.
They are very good at sourcing even quite obscure nails.

For example, I recently needed a quantity of stainless steel full
round head nails in 50mm for my framing nailer. It wasn't a stock
item, but they sourced them in a couple of days.

Ziggy

unread,
May 7, 2004, 3:58:03 PM5/7/04
to
On Thu, 06 May 2004 19:39:45 +0100, Andy Hall <an...@hall.nospam>
wrote:

>On Thu, 06 May 2004 17:05:38 +0100, Ziggy <No-...@nowhere.notime>
>wrote:
>
>>Axminster sell a 13g masonry nailer and sell 13g masonry nails for
>>this. Is it possible to stick nails in this nailer for use in fixing
>>wood to wood and if so, does any place sell 13g wood nails?
>>
>>TIA
>
>
>Try www.topgun.co.uk
>
>Give them a call. I fthey don't have, they will be able to get them
>almost certainly.

I called and the chap I spoke to said there were many variations on
the 13g nail or nailer, so it would not be worth it.

That said, am I right in thinking I could just use masonry nails in
wood?

TIA

Andy Hall

unread,
May 7, 2004, 4:12:40 PM5/7/04
to
On Fri, 07 May 2004 20:58:03 +0100, Ziggy <No-...@nowhere.notime>
wrote:


I don't know. Generally they aren't very sharp so might make a mess.

Steven Briggs

unread,
May 19, 2004, 3:04:09 PM5/19/04
to
In message <9cok90hqutu7a8cfj...@4ax.com>, Ziggy
<No-...@nowhere.notime> writes

Well, I just bought one of those AWMN's.
What a beast.
I've just banged a load of 50mm masonry nails into wood (and my garage
floor in a couple of trys).
By default it drives them about 2mm below the surface, and the firing
pin is a fairly large rectangular affair (~6.5 x 2.5mm), which makes
quite a size recess in the wood.
However by adjusting the nose cover plate down a tad, I got it driving
the nails flush or just below the surface.
There's no splintering or splitting.

So I'll be using on the shed build a few weeks time.

Then I might sell it on.


As to other nails, I found a huge list at
<http://www.tooled-up.com/MicroCategory.asp?CID=27&SCID=310&MCID=1312>

The 13ga equates (I think) to 2.2mm gauge listed on page 3 of that list.
All by "Ace & K", who I'd never heard of but seem to be into air nailers
big time.

If anyone knows of their web site (if they have one), where is it cos I
can't find it.

Cheers
--
Steve

The garden gnome

unread,
Mar 26, 2021, 1:15:06 PM3/26/21
to
I bought an Axminster tools masonry nailer this time last year together with 50 mm T nails under the impression that behind the cladding on our bunglow gable there was a block wall. Nope. The cladding was attached to thick wooden battens on the wall so ended up using the masonry nails to attach a further thickness of batten on top of those to anchor the Cedral to. The masonry nails were fine securing wood to wood. It was probably much more secure as a result. It cut the job time right down to just a couple of hours whereas electric screwdriver or good old hammer and nails would have been exhausting. Thrilled to bits with the nailer. Word of advice, despite what they say, a compressor of 50litre minimum would be advisable.

--
For full context, visit https://www.homeownershub.com/uk-diy/nails-for-air-nailer-sources-75363-.htm

0 new messages