Boiler Scrappage scheme
YAPH
http://news.bbc.co.uk/1/hi/uk/8440610.stm
Caption contest, anyone? ;-)
--
John Stumbles -- http://yaph.co.uk
"I used to think correlation implied causation.
Then I took a statistics course and now I don't."
"Sounds as if the statistics course helped."
"Well, maybe."
Graham.
"YAPH" <use...@yaph.co.uk> wrote in message news:7qg8gp...@mid.individual.net...
> Interesting choice of boiler illustrating article.
>
> http://news.bbc.co.uk/1/hi/uk/8440610.stm
>
> Caption contest, anyone? ;-)
>
> --
> John Stumbles -- http://yaph.co.uk
Doesn't look that old to my untrained eye.
--
Graham.
%Profound_observation%
Dave Starling
the news piece. I can't see what the other boiler is but again I doubt
its G rated. Any G rated boiler would be a floor standing beast with
a big old lump of cast iron as the heat exchanger.
Now the question is how are they going to police the scheme to stop
someone calling up and fibbing as to which boiler they currently have.
Once its been replaced its too late unless they require you to keep
the old databadge as proof. Somehow I doubt they are that bothered.
Dave.
Tim..
"Dave Starling" <dvsta...@googlemail.com> wrote in message
news:33054cc2-87f1-49b3...@r24g2000yqd.googlegroups.com...
To the panel:
In the farmhouse we have a circa 1970 Potterton sectional cast iron oil
fired boiler. It now has a Inter by (Bentone) burner fitted. At the last
service the engineer did the flue readings with his whizzo tool. Result was
it was running at 93% efficiency.
We also have an all singing all dancing 3 yr old W-B which when sniffed
came out at 91% effic. which surprised me.
So, is the Potterton past its sell by date??
Tim..
cynic
> "Dave Starling" <dvstarl...@googlemail.com> wrote in message
Potterton BOA with inbuilt draught diverter flap at the rear of the
flue offtake?
All too many service "engineers" fall into the trap of taking flue gas
temperature readings from the flue after the introduction of cooling
dilution air.
Regardless of what burner you have I'd be astounded if you actually
had anything approaching 80% true efficiency from that model. The
Inter-oil burner is a decent model but it can't do the impossible.
Now as to whether its worth changing such a reliable boiler is another
matter entirely and you can bet the swappage schem will require
installation by an authorised installer whose prices will negate the
advantage.
Tim..
"cynic" <icel...@talktalk.net> wrote in message
news:79cd9013-346d-4802...@z41g2000yqz.googlegroups.com...
Yes, the very same beast. However, I watched him do it, and he sampled from
the lower enamel cover below the draught diverter. As you say, I was very
surprised at what the machine said...
Tim.
cynic
> "cynic" <icelan...@talktalk.net> wrote in message
>
> - Show quoted text -
The cold air is still mixed with the flue gases at that point unless a
long probe is used, I used to cover the flap during the temperature
measuring period. There is also the matter of dwell time to allow the
temperature probe to stabilise even with correct immersion in the flue
gases. My electroninc analyser could take up to 3 or 4 minutes before
it stabilised. Oddly enough the old dial thermometer in conjunction
with a Fyrite wet CO2 analyser and slide rule was quicker and I felt
more reliable.
Andrew Gabriel
cynic <icel...@talktalk.net> writes:
>
> The cold air is still mixed with the flue gases at that point unless a
> long probe is used, I used to cover the flap during the temperature
> measuring period. There is also the matter of dwell time to allow the
> temperature probe to stabilise even with correct immersion in the flue
> gases. My electroninc analyser could take up to 3 or 4 minutes before
> it stabilised. Oddly enough the old dial thermometer in conjunction
> with a Fyrite wet CO2 analyser and slide rule was quicker and I felt
> more reliable.
Also, was the boiler fully up to temperature?
If it's still cold, you'll get amazing efficiency reported;-)
--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]
geoff
writes
>Interesting choice of boiler illustrating article.
>
>http://news.bbc.co.uk/1/hi/uk/8440610.stm
>
>Caption contest, anyone? ;-)
>
never seen one of those before in my life
--
geoff
YAPH
> Doesn't look that old to my untrained eye.
It's not, but it's notoriously unreliable, to the extent that it (and its
manufacturer, Potterton) has even featured on "Watchdog". So, not a
candidate for the scrappage scheme but, given the above, and combined with
the choice of that model by some BBC hack (maybe one of its victims?) to
illustrate the scheme, possibly a candidate for the humorous attentions of
the uk.d-i-y posseee.
Or not, maybe :-|
--
John Stumbles -- http://yaph.co.uk
Hypnotising Hypnotists Can Be Tricky
Les Desser
Tue, 5 Jan 2010 07:36:57 writes
>Interesting choice of boiler illustrating article.
Does the fitter have to be registered with the scheme or can any fitter
participate?
According to the web site I found cheques should start rolling within
the next two weeks or so!
--
Les Desser
(The Reply-to address IS valid)
ARWadsworth
"Les Desser" <News...@dessergroup.com> wrote in message
news:+fRUeeb7...@dessergr0up.invalid...
suggests that you can use any installer.
Now how will this be policed. Random spot checks on applicants?
Adam
Les Desser
ARWadsworth <adamwa...@blueyonder.co.uk> Thu, 7 Jan 2010 15:32:30
writes
><http://www.boilerscrappagescheme.co.uk/2010/01/government-boiler-scrappage-scheme-finally-launched.php>
>
Vary slow to load .... [*]
>suggests that you can use any installer.
The Energy Saving Trust seems to be the one running the scheme
<http://www.energysavingtrust.org.uk/Home-improvements-and-products/Heati
ng-and-hot-water/Boiler-scrappage-scheme>
Quote:
Who can carry out the installation of your new boiler?
Installation of a gas or oil boiler must be carried out by an installer
registered with a competent person's scheme (such as GasSafe or OFTEC).
Installation of a microgeneration technology must be carried out by a
person qualified under the Microgeneration Certification Scheme.
.
.
[*] still waiting ....
ARWadsworth
> [*] still waiting ....
Give them chance. It did not work at all for two days after the scheme was
launched:-)
Both sites suggests any GasSafe installer can install a gas boiler and the
householder can claim back �400. I cannot see a list of approved installers.
Adam
Les Desser
<adamwa...@blueyonder.co.uk> Thu, 7 Jan 2010 17:28:57 writes
>Both sites suggests any GasSafe installer can install a gas boiler
Is "GasSafe" the new name for "CORGI"?
Tim W
wibbled on Thursday 07 January 2010 21:30
> In article <tRo1n.23195$Ym4....@text.news.virginmedia.com>, ARWadsworth
> <adamwa...@blueyonder.co.uk> Thu, 7 Jan 2010 17:28:57 writes
>
>>Both sites suggests any GasSafe installer can install a gas boiler
>
> Is "GasSafe" the new name for "CORGI"?
Yes. Only happened a short while back.
--
Tim Watts
You know you need more insulation when the snow blanket on the roof makes
the house 3 degrees warmer...
YAPH
> Is "GasSafe" the new name for "CORGI"?
No, what happened was ... oh, I CBA, but I've written about it here
http://yaph.co.uk/CORGI-GasSafe
Do keep up at the back <sigh!> ;-)
--
John Stumbles -- http://yaph.co.uk
Procrastinate now!
Les Desser
Fri, 8 Jan 2010 01:15:46 writes
>No,
Thanks Tim for the Yes and thanks John for the No
I understand exactly what you both mean :)