Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
British Gas Wireless Receiver with Hive
19 views
Skip to first unread message
Marshall Chaloner Morris
Apr 17, 2020, 4:44:04 PM4/17/20
to
I have mislaid my Instruction leaflet for my WR1. The red alarm light in on
and the Drayton Motorised Valve is stuck in the Hot Water position. As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the box fixed outside the
airing cupboard as shown by the appropriate green lights. The WR1 is inside
the airing cupboard and does not use batteries - it is mains connected. I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light. I think I've done it once before but it was a long
time ago.
--
for full context, visit https://www.homeownershub.com/uk-diy/british-gas-wireless-receiver-with-hive-1424714-.htm
and the Drayton Motorised Valve is stuck in the Hot Water position. As a
result I have Hot Water but no heating. The Hive Thermostat is showing the
correct indications sand these are transmitted to the box fixed outside the
airing cupboard as shown by the appropriate green lights. The WR1 is inside
the airing cupboard and does not use batteries - it is mains connected. I
would like to get an instruction leaflet so I can try resetting the unit to
clear the red alarm light. I think I've done it once before but it was a long
time ago.
--
for full context, visit https://www.homeownershub.com/uk-diy/british-gas-wireless-receiver-with-hive-1424714-.htm
newshound
Apr 18, 2020, 4:50:41 PM4/18/20
to
On 17/04/2020 21:44, Marshall Chaloner Morris wrote:
> I have mislaid my Instruction leaflet for my WR1. The red alarm light
> in on
> and the Drayton Motorised Valve is stuck in the Hot Water position. As a
> result I have Hot Water but no heating. The Hive Thermostat is showing the
> correct indications sand these are transmitted to the box fixed outside
> the
> airing cupboard as shown by the appropriate green lights. The WR1 is
> inside
> the airing cupboard and does not use batteries - it is mains connected. I
> would like to get an instruction leaflet so I can try resetting the unit to
> clear the red alarm light. I think I've done it once before but it was
> a long
> time ago.
>
Have you actually tried googling direct for the manual? IME almost all
> I have mislaid my Instruction leaflet for my WR1. The red alarm light
> in on
> and the Drayton Motorised Valve is stuck in the Hot Water position. As a
> result I have Hot Water but no heating. The Hive Thermostat is showing the
> correct indications sand these are transmitted to the box fixed outside
> the
> airing cupboard as shown by the appropriate green lights. The WR1 is
> inside
> the airing cupboard and does not use batteries - it is mains connected. I
> would like to get an instruction leaflet so I can try resetting the unit to
> clear the red alarm light. I think I've done it once before but it was
> a long
> time ago.
>
modern stuff has manuals online.
ARW
Apr 19, 2020, 6:41:07 AM4/19/20
to
So the chances are slim.
--
Adam
Andy Bennet
Apr 19, 2020, 11:37:16 AM4/19/20
to
On 17/04/2020 21:44, Marshall Chaloner Morris wrote:
> I have mislaid my Instruction leaflet for my WR1. The red alarm light
> in on
> and the Drayton Motorised Valve is stuck in the Hot Water position. As a
> result I have Hot Water but no heating. The Hive Thermostat is showing the
> correct indications sand these are transmitted to the box fixed outside
> the
> airing cupboard as shown by the appropriate green lights. The WR1 is
> inside
> the airing cupboard and does not use batteries - it is mains connected. I
> would like to get an instruction leaflet so I can try resetting the unit to
> clear the red alarm light. I think I've done it once before but it was
> a long
> time ago.
>
>
If you have a Hive system why have you got a WR1?
> in on
> and the Drayton Motorised Valve is stuck in the Hot Water position. As a
> result I have Hot Water but no heating. The Hive Thermostat is showing the
> correct indications sand these are transmitted to the box fixed outside
> the
> airing cupboard as shown by the appropriate green lights. The WR1 is
> inside
> the airing cupboard and does not use batteries - it is mains connected. I
> would like to get an instruction leaflet so I can try resetting the unit to
> clear the red alarm light. I think I've done it once before but it was
> a long
> time ago.
>
>
The Hive replaces it.
If the Hive was a retrofit then the WR1 reciever contacts should have
been shorted out or the box removed.
0 new messages