Cisco IP Phone 초기화 설정 방법

[Oh Dongyoung (Consultant)]

안녕하십니까?

 

급하게 질문 하나 드립니다.

 

현재 CUCM 6.5 Version 사용하고 있습니다.

 

여러가지 사정상 단말기에서 초기화 설정이 필요하게 되었습니다.

(Reset the 7942 IP Phones to the Factory Default)

 

In order to perform a factory reset of a phone if the password is set, complete these steps:

 

1. Unplug the power cable from the phone, and then plug in the cable again.

 

The phone begins its power up cycle.

 

2. Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #.

 

The Headset, Mute, and Speaker buttons flash in sequence in order to indicate that the phone waits for you to enter the key sequence for the reset.

 

3. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

 

If you repeat a key within the sequence, for example, if you press 1223456789*0#, the sequence is still accepted and the phone resets.

 

If you do not complete this key sequence or do not press any keys, after 60 seconds, the Headset, Mute, and Speaker buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.

 

If you enter an invalid key sequence, the buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.

 

If you enter this key sequence correctly, the phone displays this prompt:

 

Keep network cfg? 1 = yes 2 = no

 

4. In order to maintain the current network configuration settings for the phone when the phone resets, press 1. In order to reset the network configuration settings when the phone resets, press 2.

 

If you press another key or do not respond to this prompt within 60 seconds, the phone continues with its normal startup process and does not reset. Otherwise, the phone goes through the factory reset process.

 

Reset the 7941 and 7961 IP Phones to the Factory Default
Complete these steps:

 

1. Unplug the power cable from the phone, and then plug in the cable again.

 

The phone begins its power up cycle.

 

2. Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #.

 

The line buttons flash in sequence in order to indicate that the phone waits for you to enter the key sequence for the reset.

 

3. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

 

If you repeat a key within the sequence, for example, if you press 1223456789*0#, the sequence is still accepted and the phone resets.

 

If you do not complete this key sequence or do not press any keys, after 60 seconds the Headset, Mute, and Speaker buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.

 

If you enter an invalid key sequence, the buttons no longer flash, and the phone continues with its normal startup process. The phone does not reset.

 

If you enter this key sequence correctly, the phone displays this prompt:

 

upgrading

 

상기와 같이 설정 진행을 하라고 하는데....도통 진행이 되지 않습니다.

짧은 영어 실력에 해석을 잘 못하고있는지.....

 

고수님들의 고견 부탁 드립니다.

 

 

환절기 감기 조심 하십시오.

감사합니다.

[Toro]

tel ->power reset (전원파워 다시 뽑았다 꼽으세요)-> #길게(전원영결과 동시에 샵을 눌러):해드셋 LED 깜빡임 ->123456789*0# -> h/w 리셋 y/n에서 no : 공장초기화

2010년 10월 4일 오후 3:25, Oh Dongyoung (Consultant) <dongyo...@consultant.volvo.com>님의 말:

--
Google 그룹스 'Unified Communications Forum' 그룹에 가입했으므로 본 메일이 전송되었습니다.
이 그룹에 게시하려면 ucf...@googlegroups.com(으)로 이메일을 보내세요.
그룹에서 탈퇴하려면 ucforum+u...@googlegroups.com로 이메일을 보내주세요.
더 많은 옵션을 보려면 http://groups.google.com/group/ucforum?hl=ko에서 그룹을 방문하세요.

--
행복하소서~