Upgrading to 7.0.1.1 (Compact Flash out of space error)

[Teldata]

Source: http://www.uc500.com/upgrading-7011

Upgrading to 7.0.1.1
Submitted by cem on Mon, 01/26/2009 - 14:46 CCA 1.9 CME 7.0 compact
flash

Over the weekend I upgraded the UC520 to the latest IOS and CME
(UC520-7.0.1.1-ea.zip). I ran into the same problems others have had
regarding the Compact Flash out of space error. Tried the Cisco Tech
note, with no success. Card still did not have enough space. (Note: I
did not try to copy the file from the CLI, just CCA 1.9 per step 3)
Did the usual searching on info regarding whether or not third party
CF can be used. Didn’t really find a good answer. So, I tried it.

Turned off the system. Pulled the CF (Cisco 128Mb) card out. Using a
card reader, copied the files to my hard drive. Removed card. Plugged
in a 2Gb SanDisk Type II. Formatted it by using the command prompt
(format f: ) Copied the files to the new CF. Plugged it back in and
turn the system on. Seems to work fine.

After the system booted back up, I continued with the upgrade. No
problems. It took a little over an hour, as predicted by CCA. During
which, new firmware was pushed to the phones (7965).

In CCA 1.9, I noticed that before the upgrade it did not show Call
Blast Group under Voice Features. And after the upgrade, it appeared.
Nice that it hides features not available with the system that you
have. I have also noticed that the version numbers are not shown
correctly in CME GUI (http://10.1.10.1). Not sure why.

------------------ show version ------------------

Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M),
Experimental Version 12.4(20081021:063036) [jcwang-20T1a 102]
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Mon 20-Oct-08 23:30 by jcwang

ROM: System Bootstrap, Version 12.4(11r)XW, RELEASE SOFTWARE (fc1)

UC520 uptime is 1 day, 17 hours, 37 minutes
System returned to ROM by reload at 16:27:00 PST Sat Jan 24 2009
System restarted at 16:27:43 PST Sat Jan 24 2009
System image file is "flash:uc500-advipservicesk9-mz.124-20.T1a"
Last reload reason: Reload Command

Cisco UC520-32U-8FXO-K9 (MPC8358) processor (revision 0x202) with
249856K/12288K bytes of memory.
Processor board ID FTX1207Y03C
MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20
40 User Licenses
10 FastEthernet interfaces
2 terminal lines
8 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
128K bytes of non-volatile configuration memory.
2000880K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102