tux2live 製作出來的 iso 開機停在 initramfs

60 views
Skip to first unread message

matt.l...@gmail.com

unread,
Dec 24, 2013, 3:46:58 AM12/24/13
to tux2...@googlegroups.com
請問一下
 
我在 ubuntu 13.04 安裝好的環境 tux2live 製作出來的 iso 開機停在 initramfs,
 
/init: line 252: mountroot: not found
mount: mounting /dev/ on /root/dev failed: No such file or directory
...
BusyBox v1.20.2 ...
...
(initramfs)
 
 
如附件,
 
請問一下我可以從哪邊去檢查問題在哪邊? 謝謝
 
BR
Matt
initramfs.png
initramfs1.png

Ceasar Sun

unread,
Dec 26, 2013, 9:03:50 PM12/26/13
to tux2...@googlegroups.com, matt.l...@gmail.com
您好,

Ubuntu 13.04 與 13.10 的環境除了要補上 squashfs-tools和 live-boot-initramfs-tools 套件外,可能會需要 live-boot
如下:
$ sudo apt-get install squashfs-tools live-boot-initramfs-tools live-boot 再進行打包作業, 如下:
$ sudo tux2live -b

另外,在製作出來的 live 開機時,將開機參數中的 splash 與 quiet 參數移除,會比較容易看到更多訊息以方便除錯。

    Ceasar

matt.l...@gmail.com於 2013年12月24日星期二UTC+8下午4時46分58秒寫道:

matt.l...@gmail.com

unread,
Dec 26, 2013, 9:58:25 PM12/26/13
to tux2...@googlegroups.com, matt.l...@gmail.com
Hi Ceasar,
 
可以用了, 的確是因為 live-boot 這個套件沒裝, 造成的,
在ubuntu 13.04 下 , ./tux2live -c 檢查完提示 只說要裝 squashfs-tools 和 live-boot-initramfs-tools
所以我就沒裝到 live-boot
在執行 ./tux2live -b 的時候 有訊息提示 說 live boot 會無法執行 ,
 
加裝 live-boot 之後做出來的 iso 就可以開進 live ubuntu了, 謝謝你
 
BR
Matt

matt.l...@gmail.com於 2013年12月24日星期二UTC+8下午4時46分58秒寫道:

Ceasar Sun

unread,
Dec 26, 2013, 11:06:28 PM12/26/13
to tux2...@googlegroups.com, matt.l...@gmail.com
不客氣。
在下個版本會改善這部分的流程,也謝謝您提醒。

    Ceasar

matt.l...@gmail.com於 2013年12月27日星期五UTC+8上午10時58分25秒寫道:
Reply all
Reply to author
Forward
0 new messages